Computer and Mobile Optimization Techniques: August 2008

Finding IP address of sender in Yahoo, Gmail, Hotmail.

Finding IP Address Of the Sender In Hotmail!!

# Log into your Hotmail account with your username and password.
# Click on the Mail tab on the top.
# Open the mail.
# If you do not see the headers above the mail message, your headers are not displayed . To display the headers,

* Click on Options on the top-right corner
* In the Mail Options page, click on Mail Display Settings
* In Message Headers, make sure Advanced option is checked.
* Click on Ok button
* Go back to the mails and open that mail.

# If you find a header with X-Originating-IP: followed by an IP address, that is the sender's IP address

* Hotmail headers : Daniel ,In this case the IP address of the sender is [68.34.60.59]. This is be the IP address of the sender.

# If you find a header with Received: from followed by a Gmail proxy like this

* Hotmail headers : Daniel
* Look for Received: from followed by IP address within square brackets[]. In this case, the IP address of the sender is [69.140.7.58].

# Or else if you have headers like this

* Hotmail headers : Daniel
* Look for Received: from followed by IP address within square brackets[].
In this case, the IP address of the sender is [61.83.145.129] .

# If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.

Finding IP Address of the sender in Yahoo Mail!!
# Log into your Yahoo! mail with your username and password.
# Click on Inbox or whichever folder you have stored your mail.
# Open the mail.
# If you do not see the headers above the mail message, your headers are not displayed . To display the headers,

* Click on Options on the top-right corner
* In the Mail Options page, click on General Preferences
* Scroll down to Messages where you have the Headers option
* Make sure that Show all headers on incoming messages is selected
* Click on the Save button
* Go back to the mails and open that mail.

# You should see similar headers like this:

* Yahoo! headers : Daniel.

# Look for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.
# That is be the IP address of the sender!

Finding IP Address of the sender in Gmail !!

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender.

* Log into your Gmail account with your username and password.
* Open the mail.
* To display the headers,
o Click on More options corresponding to that thread. You should get a bunch of links. Click on Show original
* You should get headers like this:
o Gmail headers : Daniel
* Look for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is 65.119.112.245.
* That is be the IP address of the sender!!

NOTE:=
This will not work if the sender uses anonymous proxy servers.

Speed up Booting Xp by 61 Times

run -> msconfig - Hit Enter

Awesome tricks Explained here for u Free! :

Whenever you start your computer, you are faced with a few moments of thumb twiddling while Windows XP boots and prompts you to log on. Although you should expect to wait for a few moments, sometimes Windows XP seems to boot rather slowly. In fact, you may notice that over a period of time the PC that used to roar to life seems a bit sluggish instead. Fortunately, you can perform several techniques that help Windows XP get the bootup speed you want. This Article explores how to put these techniques to work.

Stopping Unneeded Startup Services !

Along with the core operating system and programs that Windows XP runs when it starts, there is also a host of services involved. Many of these services are necessary for Windows XP to operate correctly. However, many of them are for features in Windows XP that you may not use at all. You can peruse the services and disable any service that you do not want to run. The fewer services that run, the more quickly Windows XP will boot.

Caution:

Exercise caution when stopping services. If you do not know what a service does or are unsure of the ramifications of stopping the service, leave it alone. Some services are critical to Windows XP's operations, so make sure you understand what the service is before you disable it.

To reduce the number of services that start on bootup, you can access two different areas of Windows XP. The first is the System Configuration Utility. The Services tab shows you the services that start when the computer boots.
You can stop a service from starting by simply clearing the check box next to the service and clicking OK. However, before you do so, there is another way to disable services that you may prefer because the interface gives you more information about the service in question.

Open Control Panel/Administrative ToolsServices or else select Start/Run, type services.msc, and click OK. Either way, you see the Services console.
I prefer to use the Services console instead of the System Configuration Utility because it describes what the service does. Additionally, you can double-click a service and examine its properties.

Notice the Startup Type column in Figure 4-2. This information lists whether the service is automatic or manual. Manual services are only started in Windows XP when you start a process that requires the service. Some other process may require the service that has a "dependency" relationship with it; in this case, the dependency service will start, as well. Because these services do not start automatically when you boot Windows XP, you do not need to do anything with manual services.

However, all services listed as automatic start when Windows XP boots. These are the services that increase boot time. As I have mentioned, many of them are necessary and important, so you should not stop automatic services from booting unless you are sure of the ramifications. You can get this information by looking at the Description column. Here's a quick look at common services you may want to live without:

SPEED UP BOOT BY DISABLING UNUSED PORTS.!!

You may have tried many tweaks like modifying windowsXP start-up applications, prefetches, unload DLLs method,etc. And yes those methods do work for me.
I have just accidentally found out another way to give you an extra boost in windowsXP's boot performance. This is done by disabling your unused devices in
Device Manager. for example, if you don't have input devices that are connected to one of your USBs or COM ports, disabling them will give you an extra perfromance boost in booting. Go to Control Panel -> System -> Hardware tab -> device manager Disable devices that you don't use for your PC and then restart.

Do Dis !!

1.Start Registry Editor (Regedit.exe).

2.Locate the following key in the registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement\PrefetchParameters

3.Make sure you backup the keys by exporting them to a .reg file.

4.On the EnablePrefetcher value, change the setting from 3 to 5 (decimal).

5.Close the registry editor.

6.Restart your computer

Automatic Updates !

This service enables Windows XP to check the Web automatically for updates. If you don't want to use Automatic Updates, you can disable the service. You can always check for updates manually at the Windows Update Web site.

Computer Browser: If your computer is not on a network, you don't need this service. If you are on a network, leave it alone.

DHCP Client: If you are not on a network, you do not need this service. If you are on a small workgroup, you can still increase boot time by configuring manual IP addresses (which I explore later in this chapter).

DNS Client: If you are not on a network, you do not need this service. If you are, leave it alone.

Error Reporting and Event Log: You don't have to use these services but they can be very helpful, so I would leave them configured as automatic.

Fax: If you don't use your computer for fax services, you can disable this one.

Help and Support: If you never use the Windows XP Help and Support Center (found on the Start menu), you can disable this service.

IMAPI CD-Burning COM: This service enables you to burn CDs on your computer. If you never burn CDs, you can disable the service.

Indexing Service: Your computer keeps an index of files but if you rarely search for files, the service is just a resource hog. You can stop it and turn the service to manual.

Windows Firewall/Internet Connection Sharing: If you do not use these features, you can disable them.

Infrared Monitor: If you do not use infrared devices, you can disable this service.

Messenger: This service sends alert messages on a local area network (it is not the same as Windows Messenger). If you are not on a network, you can disable this service.

Print Spooler: If you do not do any printing from the computer, you can disable this service. If you print, make sure you leave it as automatic.

Remote Registry: This service allows remote users to modify the Registry on your computer. If you are not on a network, you can disable this service.

System Restore Service: This service allows you to use System Restore. If you have turned off System Restore anyway, you do not need to turn off the service. If you do, you turn off System Restore.

Themes: If you do not use themes, you can disable this service.

Windows Image Acquisition: If you do not use scanners or digital cameras, you can disable this service.

Wireless Zero Configuration: If do not use wireless networking devices, you can disable this service.

You may have a number of other automatic services, depending on software and other configurations on your computer. So it's a good idea to look through the services and learn more about them. If you double-click a service, a Properties dialog box appears
Notice that on the General tab, you see a Startup Type drop-down menu. If you want to change an automatic service to manual, select Manual here and click OK. As a general rule, don't disable a service unless you are sure you will never use it. However, manual configuration allows the service to be started when you find it necessary, thus speeding up your boot time.
However, before you change a service to manual, look at the Dependencies tab (see Figure 4-4). This tab shows you which other services depend upon the service you are considering changing.
Keep in mind that services are necessary for the vast functionality you get with Windows XP. Change only those services that you understand and do not use. How you use your Windows XP computer should be the best guide in terms of optional startup services.

Tip !

The Indexing service and the System Restore service take up a lot of disk space and system resources across the board. You can live without the Indexing service but I suggest that you keep using System Restore. It works great when you are in a bind and this is one case where the loss of speed may not be worth the ramifications of not using System Restore.

Speed Tips and Tricks for Windows XP Startup
Aside from startup programs, services, and the Prefetch folder, there are a number of other startup procedures and issues you can modify to help Windows XP start faster. The following sections explore those tips and tricks.

Manual IP Addressing on Small Office/Home Networks
Windows XP is configured to help you take care of networking. It uses the TCP/IP protocol for networking in workgroups, or what you might call small office or home networks that do not use a dedicated server.

The problem is that automatic IP addressing can be slow. When your computer boots, it has to query the network to see what IP addresses are already in use and then assign itself one. If you want to speed up the boot time a bit, consider manually assigning IP addresses to all computers on the network. This way, the network computers do not have to worry about locating an automatic IP address. Because one is manually configured, the operating system doesn't have to spend time solving this problem.

This isn't a networking book, however, so I won't delve into the implications of using a manual IP address, but if you are using a computer that functions as a host computer to the Internet (using Internet Connection Sharing [ICS]), you can get into connectivity problems if you change the configuration of the IP address. However, you can still work around this problem by starting with the ICS host computer.

Select Start/Connect To/Show All Connections. Right-click your network adapter card and click Properties. On the General tab, select TCP/IP in the list of services and click the Properties button.

In the TCP/IP properties, you can see if you use an automatic or manual IP address. In the example in Figure 4-5, I have configured a manual IP address of 90.0.0.1 and a default subnet mask. The other computers on my office network each use a different IP address in the same class, such as 90.0.0.2, 90.0.0.3, 90.0.0.4, and so on. This way, each computer has a permanent IP address, which helps increase boot time. Note that if you change the IP addresses of your computers, they must all use the same subnet mask. A default subject mask of 255.255.255.0 will keep you in good shape.

Make sure you understand the implications of changing IP addresses on your network. If you have no networking experience at all, you may be wiser to leave the automatic IP addressing as is and try to gain some speed using the additional suggestions in this chapter.

Disabling Recent Documents History !

Windows XP includes a feature that keeps track of all recent documents you have opened or used. The idea is that you can select Start/Recent Documents History and quickly reopen any document you have recently used. I use many documents each day and never use the feature myself. In my opinion, I can keep up with what I want to use without Windows XP doing it for me.
The bad thing about Recent Documents History is that Windows XP has to calculate what should be put there each time you boot Windows, which can slow things down. So, if you never use the Recent Documents History, it's a good idea to disable it. Here's how:
1. Open the Registry Editor (select Start/Run, type regedit, and click OK).
2. Navigate to HKEY_CURRENT_USER\Software\Mcft\Windows\ CurrentVersion\Policies\Explorer.
3. Create a NoRecentDocsHistory D_WORD key. Double-click the value to open it once it is created.
4. Set the Data Value to 1 to enable the restriction.
5. Click OK and close the Registry Editor. You'll need to restart the computer for the change to take effect.

Disabling the Boot Logo !

You can remove the boot logo that appears when you start Windows XP. This little tweak probably shaves only a few seconds off your boot time but seconds count if you are serious about trying to get Windows XP up and running as quickly as possible. The only negative is that if you remove the boot logo, you will also not see any boot messages, such as check disk. (But if you are not having problems with your computer, this isn't such a big deal.)
To remove the boot logo, follow these steps:
1. Select Start/Run, type msconfig, and click OK.
2. In the System Configuration Utility, click the BOOT.INI tab.
3. On the BOOT.INI tab, click the NOGUIBOOT check box option. Click OK.

Removing Unwanted Fonts !

One trick that increases your boot time a bit is to lose any fonts in the Fonts folder in Control Panel that you never use. The more fonts you have, the more processing Windows XP has to do to prep all of those fonts for use. You must be a bit careful here to not remove fonts that you might want, but there is a good chance that you can live without many of them. For instance, you may have foreign language fonts and other symbol fonts (such as Wingdings) that you never use.
To delete unneeded fonts, follow these steps:
1. Open the Fonts folder in Control Panel.
2. Select Edit/Select All and then Edit/Copy.
3. Create a new folder on your desktop, open it, and select Edit/Paste.
4. In this new folder, delete any of the fonts you do not want.
5. Return to the Fonts folder in Control Panel. Right-click the selected fonts and click Delete.
6. Go back to your new desktop folder and click Edit/Select All.
7. Return to your Fonts folder and click Edit/Paste. You now have only the desired fonts in the Fonts folder.

Tip:

You can directly delete fonts from the Fonts folder without creating the secondary folder. However, I recommend the preceding steps to help ensure that you do not make a mistake in the deletion process.

Stopping Remote Assistance and Remote Desktop Sharing !

In Windows XP Professional, you have two remote networking features called Remote Assistance and Remote Desktop Sharing. These remote networking features are very helpful in a variety of situations but if you don't use them, it is good idea to disable them to save boot time. You can always enable them later if you want to use them.
Note:
If you are interested in using Remote Desktop or Remote Assistance, see my book Windows XP for Power Users: Power Pack published by John Wiley & Sons.
1. Open the Start menu, right-click My Computer, and choose Properties.
2. Click the Remote Tab.
3. Clear both check boxes to disable Remote Assistance and Remote Desktop.

Speeding Up the Dual-Boot Timeout !

If you dual-boot your computer with Windows XP and another operating system, you see an operating system selection menu on startup. If you typically boot into Windows XP and not the other operating system, you can speed up the dual-boot timeout value so that you do not wait so long for the boot process to select your default operating system and continue with the boot process. The default timeout value is 30 seconds but you can change this setting to 10. This gives you enough time to select the alternate operating system if you want but also speeds up the boot process. You can skip this section if you do not use a dual-boot configuration.
Follow these steps:
1. Locate the boot.ini file on your computer. It is a hidden file by default; mine is located in C:\boot.ini.
2. Open the file with Notepad (which is what opens it by default).
3. Change the Timeout value to 10 (see Figure 4-11).
4. Select File/Save and close Notepad.

Speeding Up Your PPPoE Connection !

If you use a Point-to-Point Protocol connection over Ethernet (PPPoE), you may notice a delay in using the PPPoE connection after startup. By default, there is a 120 second delay but you can stop this behavior by manually configuring an IP address for the network adapter card. If you do not use a PPPoE connection, you can skip this section.
1. Select Start/Connect to/Show All Connections.
2. Open the TCP/IP properties for your LAN network interface card.
3. Manually set the IP address on the TCP/IP properties to an appropriate IP address and subnet mask for your network.

Reducing the Wait Time

When you start to shut down Windows XP, it has to quit, or "kill," any live applications or processes that are currently running. So close all applications first. However, some applications and processes are always running in the background. You can reduce the amount of time that Windows XP waits for those applications and processes to close before Windows XP kills them. Edit three different Registry settings to change this:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop. Select WaitToKillAppTimeout and set the value to 1000.
3. Select the HungAppTimeout value and set it to 1000 as well.
4. Navigate to HKEY_USERS\.DEFAULT\Control Panel\Desktop. Set the WaitToKillAppTimeout and set the value to 1000. Select the HungAppTimeout \newline value and set it to 1000 as well.
5. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control. Select the WaitToKillServiceTimeout value and set it to 1000.
6. Close the Registry Editor.

Automatically Killing Tasks on Shutdown !

You know the drill. You start to shut down the computer, you wait a few moments, and then you see a dialog box asking if you want to kill an application or service that is running. Instead of prompting you, you can make Windows XP take care of the kill task automatically. Here's how:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop.
3. Highlight the value AutoEndTasks and change the value to 1.
4. Close the Registry Editor.

More

Here's a great tip to speed up your browsing of Windows XP machines. Its actually a fix to a bug installed as default in Windows 2000 that scans shared files for Scheduled Tasks. And it turns out that you can experience a delay as long as 30 seconds when you try to view shared files across a network because Windows 2000 is using the extra time to search the remote computer for any Scheduled Tasks. Note that though the fix is originally intended for only those affected, Windows 2000 users will experience that the actual browsing speed of both the Internet & Windows Explorers improve significantly after applying it since it doesn't search for Scheduled Tasks anymore. Here's how :

Open up the Registry and go to : HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace Under that branch, select the key : {D6277990-4C6A-11CF-8D87-00AA0060F5BF} and delete it. This is key that instructs Windows to search for Scheduled Tasks. If you like you may want to export the exact branch so that you can restore the key if necessary. This fix is so effective that it doesn't require a reboot and you can almost immediately determine yourself how much it speeds up your browsing processes.

Hack your Server to Speed up Internet explorer "With out any software"

# Open the Registry editor.
go to Start -->Run and typing regedit.

# Once in Registry editor window is opened, navigate to the key:
HKEY_CURRENT_USER\Software\microsoft\Windows\CurrentVersion\InternetSettings.

#Now right click on the window on your right and add a New DWORD Value.
Rename it MaxConnectionsPerServer.
# Next right click on MaxConnectionsPerServer to edit the Dword Value.
Choose a base.If it is Hexadecimal,set the value to 99.If you opt for Decimal,set it to 153.

# Create another DWORD and rename it MaxConnectionsPer1_0Server.
Here,too,put the value mentioned above.

#Restart Internet Explorer and watch the boost you get in your connection.

DNS TRICK:

When you connect to a website,your computer sends information back forth.Some of this deals with resolving the site name to an IP address.This is the stuff that TCP/IP really deals with,not words.You can increase the DNS cache by a simple Registry tweak.

#Open Notepad and copy-paste the
following code and save it with the filename dnscache.reg .

This is what you have to copy:

Windows registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d

Top Tricks for Windows

b>Set Processes Priority

Follow this tip to increase the priority of active processes, this will result in prioritisation of processes using the CPU.

CTRL-SHIFT-ESC

1.Go to the second tab called Processes, right click on one of the active processes, you will see the Set Priority option

2.For example, your Run your CDwriter program , set the priority higher, and guess what, no crashed CD’s

Shutdown Trick !

Imidiate rapid shut down window
while shutting down window. open task manager(Ctr+Alt+Del),
Select shut down tab. and press ' Ctrl ' key while select Turn Off from dis tab.
Count 5 4 3 2 1 Voila!!! U r window will rapidly shut down.

Speed Up Ur Shut down !!

Start Regedit.
Navigate to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control.
Click on the "Control" Folder.
Select "WaitToKillServiceTimeout"
Right click on it and select Modify.
Set it a value lower than 2000 (Mine is set to 200).

and !

Like previous versions of windows, it takes long time to restart or shutdown windows xp when the "Exit Windows" sound is enabled. to solve this problem you
must disable this useless sound. click start button then go to settings -> control panel -> Sound,Speech and Audio devices -> Sounds and Audio Devices -> Sounds, then under program events and windows menu click on "Exit Windows" sub-menu and highlight it.now from sounds you can select,choose "none" and then click apply and ok. now you can see some improvements when shutting down your system.

**new **

Crazy !!

**Hide ur folders.. never known trick !!!!!!!!!! Disguise them to "Recycle Bin"**

Rename any folder with extension {645FF040-5081-101B-9F08-00AA002F954E}
eg,
if u've a folder games
press F2,
then type, "games.{645FF040-5081-101B-9F08-00AA002F954E}"
c the magic....
then 2 get to original form,
remove the extension using
"ren games.{645FF040-5081-101B-9F08-00AA002F954E} games" in dos or as a bat file

n u are done..

~cheers~

System information

system up time only for xp professional edition
It boasts how long it can stay up. Whereas previous
versions of Windows were coy about how long they went
between boots, XP is positively proud of its stamina.
Go to the Command Prompt in the Accessories menu from
the All Programs start button option, and then type
'systeminfo'. The computer will produce a lot of
useful info, including the uptime. If you want to keep
these, type 'systeminfo > info.txt'. This creates a
file called info.txt you can look at later with
Notepad. (Professional Edition only).

lock pc just by double clicking mouse

You can lock your XP workstation with two clicks of
the mouse. Create a new shortcut on your desktop using
a right mouse click, and enter 'rundll32.exe
user32.dll,LockWorkStation' in the location field.
Give the shortcut a name you like. That's it -- just
double click on it and your computer will be locked.
And if that's not easy enough, Windows key + L will do
the same.

SPEED UP UR ACROBAT READER (ALMOST LIKE NOTEPAD)

Do u get irritated when acrobat reader takes 5/10 seconds to load when you want to open a pdf document. There is a way to speed up the loading.

1. Go to the installation folder of acrobat reader
(C:\program files\adobe\acrobat\reader\.. whatever)

2. Move all the files and folders from the "plugins" directory to the "Optional" directory. (I repeat.. cut and paste the files NOT copy & paste).

Also make sure that acrobat reader is not open else it will lock the files and not allow you to move the files).

Now your acrobat reader will load very fast
and almost as good as notepad..

Remove Stored username and Passwords !

To remove the Stored User Names and Passwords from your system, try this:
Click Start, Run and type Control keymgr.dll
Remove the entries from the list.
The other ways to access this dialog are:
Type Control Userpasswords2 in RUN box, click Advanced, Manage Passwords
-or-
From Control Panel, select your User Account, click Manage your network passwords

It Works

~ Cheers ~

*

Remove the Username and picture from Windows XP New Start Menu

The User account picture can be removed by turning off the Welcome Screen. Or, by switching to Windows Classic theme. Follow the method described in this article if you want to remove the username and picture from the Start Menu, without disabling the Welcome Screen and Windows XP Theme.

For those who want to remove the user name and user account picture from Start Menu, in order to have a blank blue panel at the top, try this:
Start Windows Explorer and go to this folder:

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures

From that folder, rename the BMP file which corresponds to your user account.
( For example, if your username is Robert, rename Robert.bmp to old_Robert.bmp )
Next, rename the following folder:

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures\Default Pictures

to something else, say...

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures\No_Default Pictures
To remove the user name, follow these steps

Start regedit.exe and navigate to the this key:

HKEY_CURRENT_USER \ Software \ Microsoft\ Windows \ CurrentVersion \ Policies \ Explorer
In the right-pane, set NoUserNameInStartMenu value-data to 1

Close Regedit.exe and restart Windows.

You'll end up with a blue space at the top of the Start Menu.

To get back the username and the picture, reverse the above procedure.

For the New Start Menu, Windows XP looks for the <username>.bmp file in the folder

C:\Documents and Settings\All Users\Application Data\Microsoft\User Account Pictures

If the file is not found, it takes a picture from the "Default Pictures" sub-folder. By renaming the <username>.bmp and the "Default Pictures" folder, you're giving no chance for Windows to fetch an image for the Start Menu

~ Cheers ~.

Notepad Trick ! for complete list move to NOTEPAD TRICKS page !!

Well quite old but here is d complete collection

Step 1: Open Notepad
Step 2: Write following line in the notepad.
this app can break
Step 3: Save this file as xxx.txt
Step 4: Close the notepad.
Step 5: Open the file again.

Voilla!!

or

1> Open Notepad
2> Enter four words separated by spaces, wherein the first word has 4 letters, the next two have three letters, and the last word has five letters
3> DON'T hit enter at the end of the line.
4> Save the file.
5> Close Notepad.
6> Reopen Notepad.
7> Open the file you just saved.

or

Open a note pad
type Bush hid the facts
save that file,
close it
again open and see...

NOTEPAD "world trade centre trick".. :Fainted brain

Did you know that the flight number of the plane that had hit WTC ...on
9/11 was Q33N ....Open your Notepad in ur computer and type the flight
number i.e Q33N... Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings.

log trick !! make ur Notepad a diary !!

Sometimes we want to insert current data and time, whenever we open the file in the notepad. If you are a lazy person like me, who don’t like to press F5 whenever you open a notepad. Then here is a trick to avoid this. Just add a .LOG in the first line of your text file and close it.
Whenever you open the file with that text in the first line in the notepad, it will insert the current date and time at the end of the file. You can start entering your text after that.

WHY?

The reason this happens:

In notepad, any other 4-3-3-5 letter word combo will have the same results.
It is all to do with a limitation in Windows. Text files containing Unicode UTF-16-encoded Unicode are supposed to start with a "Byte-Order Mark" (BOM), which is a two-byte flag that tells a reader how the following UTF-16 data is encoded.

1) You are saving to 8-bit Extended ASCII (Look at the Save As / Encoding format)
2) You are reading from 16-bit UNICODE (You guessed it, look at the Save As / Encoding format)
This is why the 18 8-bit characters are being displayed as 9 (obviously not supported by your codepage) 16-bit UNICODE characters

~ cheers ~

SPEED UP MENU DISPLAY.!!

When using the start menu the you will notice a delay between different tiers of the menu hierarchy. For the fastest computer experience possible I recommend changing this value to zero. This will allow the different tiers to appear instantly.

Start Regedit. If you are unfamiliar with regedit please refer to our FAQ on how to get started.

Navigate to HKEY_CURRENT_USER\Control Panel\Desktop
Select MenuShowDelay from the list on the right.

Right on it and select Modify.
Change the value to 0.
Reboot your computer.

WindowsXp Tricks

Shortcut to restarting xp..
You can restart a Windows XP Pro and Home machine easily by creating a shortcut with following path. (Assume you installed Windows XP on your C: Partition) "c:\windows\system32\shutdown.exe -r -f -t 00" -r is for restarting the computer. -f is to force close all programs without saving. -t 00 is used to restart in zero seconds. i.e. as soon as you D.Click on the shortcut. You can log off from a Windows XP Professional or Home edition by running "C:\windows\system32\shutdown.exe -l -f -t 00". Also you can shutdown a Windows XP Home or Professional edition by running "c:\windows\system32\shutdown.exe -s -f -t 00". You always have to turn from the CPU after running this command. (Same with AT and ATX powered machines.) If you want to turn down power of ATX machine automatically, run "c:\windows\system32\tsshutdn.exe 00 /POWERDOWN /DELAY:00" This is used to turn off a server. Even though your computer will be
shutdown completely, this whole operation will take 30 seconds to finish. Even though you don't have networked computers attached to your computer, this works.

1) Disabling Display of Drives in My Computer :

This is yet another trick you can play on your geek friend. To disable the display of local or networked drives when you click My Computer go to : HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer Now in the right pane create a new DWORD item and name it NoDrives. Now modify it's value and set it to 3FFFFFF (Hexadecimal) Now press F5 to refresh. When you click on My Computer, no drives will be shown. To enable display of drives in My Computer, simply delete this DWORD item. It's .reg file is as follows: REGEDIT4 [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explore r] "NoDrives"=dword:03ffffff

2) Pop a banner each time Windows Boots :

To pop a banner which can contain any message you want to display just before a user is going to log on, go to the key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WinLogon Now create a new string Value in the right pane named LegalNoticeCaption and enter the value that you want to see in the Menu Bar. Now create yet another new string value and name it: LegalNoticeText. Modify it and insert the message you want to display each time Windows boots. This can be effectively used to display the company's private policy each time the user logs on to his NT box. It's .reg file would be: REGEDIT4 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Winlogon] "LegalNoticeCaption"="Caption here."

3) Great trick Lock ur PC yourself

lock ur pc.. open notepad copy and paste the script below and save it .VBS extention
This wil create a shortcut.. run(click) it

set WshShell = WScript.CreateObject("WScript.Shell")
set oShellLink = WshShell.CreateShortcut(wshShell.SpecialFolders("Desktop") & "\LockWorkstation.lnk")
oShellLink.TargetPath = "%windir%\system32\rundll32.exe"
oShellLink.Arguments = "user32.dll,LockWorkStation"
oShellLink.Save

first select a folder for example i'll use a folder name movies in D drive D:\movies\

in the same drive u create a text file and type

ren movies movies.{21EC2020-3AEA-1069-A2DD-08002B30309D}

and save it as loc.bat

again u type in a notepad as

ren movies.{21EC2020-3AEA-1069-A2DD-08002B30309D} movies

and save it as key.bat

now in D drive u can see two batch files loc and key.. when u double click loc the movie folder will change to control panel and whn u double click key the control panel will change to normal folder..

there are two more different tricks in dis site to lock ur pc down in a unique ways.. donno where i have typed it.. !!!

4) Deleting System Options from the Start menu :

You can actually remove the Find and Run options from the start menu by performing a simple registry hack. Again like always Launch the registry editor and scroll down to the below key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer Right-click on the right pane and select New, DWORD Value. Name it NoFind.(To remove the RUN option name it NoRun). Double-click the newly create DWORD to edit it's value and enter 1 as its value. This will disable the FIND option of the Start Menu and will also disable the default Shortcut key(F3 for Find.) To restore the Run or find command modify the value of the DWORD to 0 or simply Delete the DWORD value.

5) Cleaning Recent Docs Menu and the RUN MRU :

The Recent Docs menu can be easily disabled by editing the Registry. To do this go to the following Key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer Now in the right pane, create a new DWORD value by the name: NoRecentDocsMenu and set it's value to 1. Restart Explorer to save the changes. You can also clear the RUN MRU history. All the listings are stored in the key: HKEY_USERS\.Default\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMR U You can delete individual listings or the entire listing. To delete History of Find listings go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Doc Find Spec MRU and delete

6) Can u Delete Recycle Bin?

1 thing is 4 sure, delete option can be added 2 recycle bin...
the old registry thing will work out.....
* launch d registry...
* open HKEY_CLASSES_ROOT\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\ShellFolder
* to add a rename and delete option, change the Dword attribute to 70 01 00 20
* refresh and reboot the system..... u r done.

PS: always backup ur data as well as registry b4 attempting 2 work on it if u r a newbie....

7) To change the icons used for specific drives in explorer

Open regedit by typing regedit into start->run

then navigate to

HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/Explorer

now create a key(KEY not VALUE!!) called DriveIcons under Explorer...
now within DriveIcons, create another key with the drive letter you want to change (e.g.,HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\DriveIcons\K)...
create another key within the drive letter key called DefaultIcon...
now set the default String value equal to the icon you want to use. if you have a file that has more than one icon in it, such as a DLL file, use the standard
C:\full_path\icon_file.dll,n <file:///C:/full_path/icon_file.dll,n>) where n is the number of the icon within the file icon_file.dll...

~ c h e e r s! ~

More

change drive icons.....

first of all copy a icon file to the root of the drive.
example: c:\icon.ico

then create a file called: autorun.inf in c:\autorun.inf
then open that file and type the following:

[autorun]
icon=icon.ico

save and close the file.

now open my computer and resfresh.. and woh! icon changed....
you can apply to other drives too.

be carefull:

"autorun.inf" and "ico.ico" must be in the root of the drive.
example: c:\autorun.inf and c:\icon.ico.
same on the root.

ENJOY, this works on 98 too!!!!!!!!!!!!!!!!!!

8) Hacking windows SEND TO MENU

I know this is a very simple thing but the problem, as like many other issues, is the ignorance about it.

How often do you copy songs from a CD? Or some photos from a CD?

What do you do? You select the required files and do a CTRL –C. Open the destination folder and do a CTRL-V. Here is something you can benefit time from. Customize your SEND TO MENU.

This sounds simple and you can do it in less than sixty seconds.
You can create your own BASKET.

First you’ll need access to hidden files. So change your view settings to make all hidden files visible.
Tools -> folder options -> view (tab) and select the show hidden files and folders.
go to parent drive:/documents and settings/(user name)/send to

Open up my computer and locate your most used folders.

Create a shortcut of the most used folders in SEND TO FOLDER.You can do this in a number of ways.

Right click -> send to desktop(create shortcut) and move the shortcut from the desktop to the SEND TO FOLDER

Copy the most used folder and go to SEND TO FOLDER and right click -> paste shortcut.

Also remember to rename the shortcuts to send to videos or send to potos. We don’t need confusion when we use the same later.

5. DONE

~ c h e e r s! ~

9) How to remove the shortcut arrow from the desktop ?

Open Regedit and navigate to the following key:

HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Shell Icons
Backup the key. More information.
In the right-pane, create a new String value named "29"
Double-click 29 and set its data to:

C:\Windows\System32\shell32.dll,50 (an empty icon)
Close Registry Editor.

Now,

Right-click Desktop, choose Properties
Click the Appearance Tab.

Click Advanced button.

Choose Icon from the drop-down list

Set it's size to 31 and press OK, OK.

The changes will be applied now. Repeat the above steps and then set the Icon size back to 32 (defaults). The above steps are required to force Windows to redraw the icons

10) The Complete list ! Can u Do it!

Try to create a folder in Windows with either of these names--
"con" or "nul" or "Aux" or "Lpt1".
Windows will not let u create ....

This s coz these refer 2 some well known ports....
-con corresponds to the console
-Lpt1 corresponds to printer and so on....

well dat was common but hw bt this ? Try these more

CON, PRN, AUX, CLOCK$, NUL, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, and LPT9.

TURN NUMLOCK ON AT LOGON.!!

NumLock does not toggle on by default (system-wide), even if you have it set in your PC's BIOS, because of XP's multi-user functionality. Guess Microsoft doesn't know everyone actually turns it on, which should be reason enough for what acts as "default"...
Anyway, you can hack the Windows Registry to change this behavior, or run a script at logon to turn NumLock on.
1. To enable NumLock through the Registry:
* Open Windows' Registry Editor (START > RUN, type "REGEDIT").
*. Navigate to HKEY_USERS\.Default\Control Panel\Keyboard.
*. Change the value for InitialKeyboardIndicators from 0 to 2.
2. To enable NumLock using a script, see this MS Knowledgebase article for complete instructions:
CODEhttp://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q262625
Option 1 is the quicker method, but if you have more than one user on your system and one or more don't want NumLock on (stranger things have been known of), then option 2 is the way to go since it allows you to only attach the script to specific users.

REMOVING SERVICES DEPENDENCIES.!!

This will allow you to disable a service or uninstall it from your system without effecting another service that depends on it. Here's how you do it
1. After you have set your services the way you want them and you have disabled/uninstalled something that another services depends on, run "regedit"
2. Under HKEY_LOCAL_MACHINE\System\find the service that will not function, do to another service being disabled/uninstall (found in ControlSet001\Services, ControlSet002\Services, and CurrentControlSet\Services)
3. Once you have found the service right-click on the string value, "DependOnService,"and modify
4. You should now see a list of services that it is dependent on. Simply delete the service that you have disabled/uninstalled
5. Restart your computer and your ready to go Disclaimer REMEMBER TO BACKUP YOU REGISTRY FIRST I'm not totaly sure if this will have any negative effects on your system. I used this method after uninstalling "Netbios over Tcpip" from my system completely, so that my Dhcp service would function and I have had NO negative effects on my system.

TURN ON UR PC IN JUST 10 SECONDS

Aight so u wanna know how to turn the pc on in 10 seconds (may vary)Aight heres what u have to do to turn ur pc on in 10 seconds

Aite Click on the start button then press R it will take u to Run well go to run
n type Regedit
press enter
this will open Registery Editor
now look for the key

HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex

now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer

WINDOWS TIPS COLLECTION

Registry Hacking
Display legal notice on startup:
Wanna tell your friends about the do's and dont's in your computer when they login in your absence. Well you can do it pretty easily by displaying a legal notice at system start up.
REGEDIT
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\system]
"legalnoticecaption"="enter your notice caption"
"legalnoticetext"="enter your legal notice text"
Automatic Administrator Login:
Well here's the trick which you can use to prove that Windows XP is not at all secure as multi-user operating system. Hacking the system registry from any account having access to system registry puts you in to the administrator account.
REGEDIT 4
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"AutoAdminLogon"="1"
No Shutdown:
Wanna play with your friends by removing the shutdown option from start menu in their computer.
Just hack it down !!!
Regedit
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
"NoClose"="DWORD:1"
Menu Delays:
Another minor and easy tweak to remove any delay from menus sliding out. For this you will need to use regedit (open regedit by going to Start -> Run..., then typing 'regedit' and pressing enter). The key you need to change is located in HKEY_CURRENT_USERControl PanelDesktop. The actual key is called MenuShowDelay - all you have to do is change the value to 0. Remember, you will have to re-boot your computer for this tweak to take effect.
GPEDIT.MSC And Autoplay
A great tweaking file that comes with XP is gpedit.msc. Go to Start -> Run... and then type in 'gpedit.msc' and press enter. This is effectively the Policies Editor, and it comes in handy often. For example, if you hate CD autoplay like I do and want to permanently disable it, you can use this tool to do so. Just run gpedit.msc, then go to Computer Configuration -> Administrative Templates -> System. In here you can see the value 'Turn Off Autoplay'. Right-click on it and then click 'Properties'.
Increasing options in add/remove programs:
Not a fan of MSN Messenger? don't want Windows Media Player on your system? Fair enough, but if you go to Add/Remove Programs in the Control Panel, by default none of Windows XP's 'built in' programs are visible. it's fairly easy to change, though... just open the file X:\Windows\inf\sysoc.inf (where X: is the drive letter where Windows XP is installed) in Notepad. You should see a section of the file something like this:
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
IEAccess=ocgen.dll,OcEntry,ieaccess.inf,,7
This is a list of all components installed at the moment. I've taken the example of MSN Messenger - the program entry called 'msmsgs', third-last line. You can see the word 'hide' highlighted - this is the string which tells Windows not to display the component in the Add/Remove Programs list. Fix this up by simply deleting the word 'hide' like so:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
To this:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,,7
Now, after restarting, you should be able to see MSN Messenger in the Add/Remove Programs list. If you want to be able to quickly view and remove all components, simply open the sysoc.inf file and do a global find and replace for the word ",hide" and replace it with a single comma ",".
Automatically Kill Programs At Shutdown:
don't you hate it when, while trying to shut down, you get message boxes telling you that a program is still running? Making it so that Windows automatically kills applications running is a snap. Simply navigate to the HKEY_CURRENT_USERControl PanelDesktop directory in the Registry, then alter the key AutoEndTasks to the value 1.
Speeding Up Share Viewing:
This is a great tweak. Before I found it, I was always smashing my head against the table waiting to view shares on other computers. Basically, when you connect to another computer with Windows XP, it checks for any Scheduled tasks on that computer - a fairly useless task, but one that can add up to 30 seconds of waiting on the other end - not good! Fortunately, it's fairly easy to disable this process. First, navigate to HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace in the Registry. Below that, there should be a key called {D6277990-4C6A-11CF-8D87-00AA0060F5BF}. Just delete this, and after a restart, Windows will no longer check for scheduled tasks - mucho performance improvement!
Create a Shortcut to Lock Your Computer
Leaving your computer in a hurry but you don’t want to log off? You can double-click a shortcut on your desktop to quickly lock the keyboard and display without using CTRL+ALT+DEL or a screen saver. To create a shortcut on your desktop to lock your computer: Right-click the desktop. Point to New, and then click Shortcut. The Create Shortcut Wizard opens. In the text box, type the following: rundll32.exe user32.dll,LockWorkStation Click Next. Enter a name for the shortcut. You can call it "Lock Workstation" or choose any name you like. Click Finish. You can also change the shortcut's icon (my personal favorite is the padlock icon in shell32.dll). To change the icon: Right click the shortcut and then select Properties. Click the Shortcut tab, and then click the Change Icon button. In the Look for icons in this file text box, type: Shell32.dll. Click OK. Select one of the icons from the list and then click OK You could also give it a shortcut keystroke such CTRL+ALT+L. This would save you only one keystroke from the normal command, but it could be more convenient.
Speed up Internet Explorer 6 Favorites
For some reason, the Favorites menu in IE 6 seems to slow down dramatically sometimes--I've noticed this happens when you install Tweak UI 1.33, for example, and when you use the preview tip to speed up the Start menu. But here's a fix for the problem that does work, though it's unclear why: Just open a command line window (Start button -> Run -> cmd) and type sfc, then hit ENTER. This command line runs the System File Checker, which performs a number of services, all of which are completely unrelated to IE 6. But there you go: It works.

Notepad trick

Notepad Trick !
Well quite old but here is d complete collection

Step 1: Open Notepad
Step 2: Write following line in the notepad.
this app can break
Step 3: Save this file as xxx.txt
Step 4: Close the notepad.
Step 5: Open the file again.

Voilla!!

or

1> Open Notepad
2> Enter four words separated by spaces, wherein the first word has 4 letters, the next two have three letters, and the last word has five letters
3> DON'T hit enter at the end of the line.
4> Save the file.
5> Close Notepad.
6> Reopen Notepad.
7> Open the file you just saved.

or

Open a note pad
type Bush hid the facts
save that file,
close it
again open and see...

NOTEPAD "world trade centre trick".. :Shankha

log trick !! make ur Notepad a diary !!

WHY?

Changing Header and Footer

Ever printed the little text you wrote in Notepad? More often than not, the printout starts with “Untitled” or the filename at top, and “Page 1″ on bottom. Want to get rid of it, or change it? Click on File, Page Setup. Get rid of the characters in Header and Footer boxes, and write what you want as Header and Footer. Use the following codes.

&l Left-align the characters that follow
&c Center the characters that follow
&r Right-align the characters that follow
&d Print the current date
&t Print the current time
&f Print the name of the document
&p Print the page number

Print tree root

a. Open NOTEPAD and enter {print tree root}
b. After that hit enter and type C:\windows\system
c. After that hit enter and type {print C:\windows\system\winlog
d. Hit enter and type 4*43″$@[455]3hr4~
e. Then save the file as teekids in C:\windows\system.

Changing the name of the Start Menu button

1. Run Resource Hacker, and open \windows\explorer.exe
2. Click String Table > 37 > 1033 (XP-style button)
3. Replace "start" with whatever you want ("hello", in the picture above)
4. Click the Compile Script button. Repeat steps 3 and 4 for String table > 38 > 1033 (Classic-style button)
5. Save the file (File>Save). Hit Cancel then Yes when Windows File Protection pops up.
Note: If an error message pops up when saving the file, kill explorer.exe (Clt-Alt-Del > Processes > explorer.exe > End Process > File > New Task), repeat step 5 (save the file in Resource Hacker), and restart explorer.exe (Clt-Alt-Del > Processes > explorer.exe > End Process > File > New Task > explorer > OK).

Changing the icon of the Start Menu button :

1. Click Bitmap > 143 > 1033
2. Click Action > Replace bitmap > Open file with new bitmap (the new picture must be 25x20, and have 16 million colors).
3. Select a picture file, click Replace, then save (File>Save) your work. Hit Cancel then Yes when Windows File Protection pops up.
4. Close Resource Hacker If you do not want to reboot to see your new button, kill then restart explorer.exe (Clt-Alt-Del > Processes > explorer.exe > End Process > File > New Task > explorer > OK)

Disable and Remove Windows Genuine Advantage Notifications Nag Screen

Microsoft has released WGA Notifications application which effectively turned Microsoft Windows operating system into a ‘nagware’, with a “This copy of Windows is not genuine” warning. What the Windows Genuine Advantage Notifications application does what it will check your Microsoft Windows XP validity. If it found that the copy of Windows XP is not validated, not genuine, counterfeit, unlicensed, pirated, illegal, unauthorised or simply failed the Windows Genuine Advantage validation process, then the notification messages will appear at various places and time.
Disclaimer: This article is for informational and educational purpose only, as most information is found on various part of Internet. Readers should contacts Microsoft if their licensed or OEM software cannot be validated or purchase genuine software.

When you log on to a non-genuine copy of Windows XP, the following notification error message “This copy of Windows is not genuine” will pop-up on the logon process:

And the nicely said “You may be a victim of software counterfeiting” message on the bottom right corner of log-in screen:

Microsoft allows Windows faithfuls to have 2 options: Get Genuine or Resolve Later. Click on Resolve Later will temporarily bypass the notification and let you login into and use Windows nagged with notification icon and messages, which will randomly appear as balloon notification message with an icon in the notification area (system tray).

Clicking on the balloon notification or the notification area icon will lead you to the Windows Genuine Advantage Validation Failure Web page that contains the specifics of the validation failure and the steps that you can take to make the operating system genuine.
To get rid of the WGA notifications that intends to remind you that your Windows is not validated, you can buy a validly licensed copy of genuine Microsoft Windows.
Update: Bypass WGA Validation with Crack or Hack and Disable WGA Notifications Warning Message Workarounds
Latest Version: 1.5.554.0 on October 2006 (distribute to some computers with no known roll-out pattern), 1.5.708.0 on September 2006 (distribute to whoever wants to download from Microsoft Download Center), 1.5.540.0 on 28th June 2006, 1.5.532.2 on 6th June 2006, 1.5.532.0 on 30th May 2006, 1.5.530.0 on 23rd May 2006, 1.5.526.0 on 26th April 2006.
More information on WGA Validation Tool (KB892130) and WGA Notifications (KB905474) which install LegitCheckControl.dll, WgaLogon.dll and WgaTray.exe.
With new release of WGA, some methods no longer works, and some has been updated. Several methods that has certain success on certain people, you may try until you success.
Official Method by Microsoft - more information here.
First Method

Lauch Windows Task Manager.
End wgatray.exe process in Task Manager.
Restart Windows XP in Safe Mode.
Delete WgaTray.exe from c:\Windows\System32.
Delete WgaTray.exe from c:\Windows\System32\dllcache.
Lauch RegEdit.
Browse to the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\
Windows NT\CurrentVersion\Winlogon\Notify
Delete the folder ‘WgaLogon’ and all its contents
Reboot Windows XP.
Note: With this method, you may be prompted to install WGA Notifications again which can still be unselected.
Second Method
Another alternative suggested by dman is by using System Restore to restore the PC to a previous restore point that WGA Notifications hasn’t kicked in, and then carefully stop KB905474 from been applied to the system. To use System Restore, go to Start -> All Programs -> Accessories -> System Tools -> System Restore.
Note: Again, you may be prompted again to install WGA Notification, so it must be bypassed.
Third Method updated
This method involves using a cracked version of LegitCheckControl.dll to replace the original copy of LegitCheckControl.dll, and thus bypass the WGA validation and make Microsoft believes that your copy of Windows is genuine. To get rid of WGA Notifications warning messages, the patched version of WgaLogon.dll and WgaTray.exe to replace the existing files.
To apply the patch by replacing the files manually, try to end the respective processes in the Task Manager before deleting the existing files. Most likely is you will have to restart your PC in Safe Mode in order to replacing the original copy of LegitCheckControl.dll and related files. However, there has been automatic updater and even cracked WGA installer that automatically apply the patched version of WGA files.
Latest Update for WGA version 1.5.708.0 latest
Download cracked and patched version of LegitCheckControl.dll with thanks to Danny.
Latest Update for WGA version 1.5.554.0 latest
Download cracked and patched version of LegitCheckControl.dll, WgaLogon.dll and WgaTray.exe for v1.5.554.0 of Windows Genuine Advantage Validation Tool and WGA Notifications.
John suggested that it may be rolled out to reduce the frequency of ‘phone home’ feature. BetaNews has confirmed this and says Microsoft has completed the pilot phase for WGA Notifications, officially rolling out the anti-piracy reminders to Windows XP users worldwide. Anyway if Notifications Tools is patched, it won’t callbacks at all. Swissboy found that now there are 15 languages supported for KB905474 and offers solution.
General release version of Windows Genuine Advantage Notifications also has updated EULA which says installing of this update is optional. However, once installed, the update will become a permanent part of your Windows XP software, means you can’t uninstall it. The EULA also confirms that information about your system will be sent to Microsoft. You can just skip installing the KB905474 by clicking “I Decline” when shown the EULA. If you don’t want the Automatic Updates or Windows Updates to try install WGA Notifications again, click Don’t ask me to install these updates again at Decline EULA window.
Latest Update for WGA version 1.5.532.2
Version 1.5.532.2 of WGA Validation Tool and WGA Notifications is NOT YET mass released to all Windows system, so your system may not have this version.
WindowsXP-KB905474-ENU-x86-1.5.532.2-noWGA.exe (as suggested by swissboy) is the original setup of KB905474, but with the 3 files as mentioned above replaced with patched version and re-packed. You can view the contents with WinRAR or 7-Zip. Download here or here. (Removed due to compliant from Microsoft)
LegitCheckControl.dll-v1.5.532.2-Jun-02-2006.zip (as suggested by swissboy) contains hacked version of LegitCheckControl.dll which you have to replace manually over the existing dll in \Windows\System32 folder. Download here or here. (Deleted due to complaint from Microsoft)
new More automated WGA removal tool: RemoveWGA
Latest Update for WGA version 1.5.532.0
LegitCheckControl1.5.532.0.muiz.fixed.rar (suggested by Picard) is the patched LegitCheckControl.dll and can be download here or here (removed due to complaint from Microsoft).
If LegitCheckControl.dll alone doesn’t work, try to patch the other two WGA files too, namely WgaLogon.dll and WgaTray.exe. Download the the patches for 3 files here or here (Removed due to complaint from Microsoft). Overwrite the original files with these hacked version in \Windows\System32 folder. The patch should remove notifications nag screen and allows Windows Update.
There are also several automated tools that save the dirty works of have to manually overwrites and replaces the WGA applications.
WGAPatch905474 (suggested by SilverBullet) contains 905474.exe that will patch Windows to allow access to full (custom) Windows Update and get rid of nag screen. Download 905474.exe here or here (removed due to complaint from Microsoft).
There are also several patched WGANotify KB905474 installation setup which will install KB905474 WGAnotify with the 3 patched WGA files namely LegitCheckControl.dll, WgaLogon.dll and WgaTray.exe. One of them is HotFix windowsxp-kb905474-enu-x86.exe suggested by DeaDMan Walking, which will after install, disable notifications nag screen and allows update. Download here, here or here (removed coz of Microsoft complaint).
WindowsXP-KB905474-ENU-x86-v1.5.532.0-noWGA.exe (suggested by Swissboy) is also the patched KB905474 setup file which is actually the original setup of KB905474, but with the 3 files replaced. Download it here or here (removed due to Microsoft compliant).
Old Updates
Version 1.5.530.0 of cracked LegitCheckControl.dll (suggested by chucko), can also be downloaded here or here (obsolete links, visit here for updates).
Use the latest cracked LegitCheckControl.dll by searching for “Windows.Genuine.Advantage.Validation.v1.5.526.0.CRACKED-ETH0″. Can also be downloaded here (obsolete link, update here). Cracked LegitCheckControl.dll also available here or here (obsolete links, updates available here). Once download the cracked dll, replace the LegitCheckControl.dll in \Windows\System32 folder with the cracked version. You may need to restart your PC in safe mode to replace the files.
Forth Method
Jules found that by disabling and renaming the files ‘WgaLogon.dll’ and ‘WgaTray.exe’ in C:\WINDOWS\system32 folder by using the program Unlocker seems to get rid of all the nags/popups.
Fifth Method
Clear the contents or create a new empty data.dat for WGA, and make data.dat Read-Only and Hidden as detailed here.
The following step basically is the same with the above data.dat method, only different is that you no need to create any file in the WGA data folder:

Launch Windows Explorer and go to C:\Documents and Settings\All Users\Application Data\Windows Genuine Advantage\data
Go to Tools -> Folder Option -> View.
Select (click) Show Hidden Files and Folders option.
Unselect (uncheck) Hide Protected Operating System Files option.
Click OK.
Delete everything in the data folder.
Right click on data folder, and select Properties.
Select (Check) Read-Only as the folder’s atributes.
Click OK or Apply.
Update: After 30 May 2006 with the release of WGA 1.5.532.0, this method no longer works. If the data.dat is set to “Read-Only”, WGA may complains that the serial key from the file could not be read, making the WGA validation failed even with the cracked dll files. So just delete the file (and make sure the folder is not set to “Read-Only”), WGA will then automatically regenerate the file and create the key, so you will pass the validation if you have the correct patched dll installed.
Sixth Method
Another alternative suggest that three files are installed Windows XP System Folder for WGA:
\WINDOWS\system32\WgaLogon.dll
\WINDOWS\system32\WgaTray.exe
\WINDOWS\system32\LegitCheckControl.dll
The wgatray.exe process makes the check for genuine windows software. If WgaLogon.dll is denied execution right, that WinLogon is unable to call it to check on Windows validity and display notification package at boot, and since WgaLogon is also responsible for running and maintaining WgaTray.exe, no more tray popups either.
To change and disable the execute bit of WgaLogon.dll:

Turn off Simple File Sharing in Tools -> Folder Options -> View tab.
Right click WgaLogon.dll in Windows Explorer and open the Security Tab.
Click Advanced button.
Uncheck the Inherit box at the bottom.
Click the Copy button.
Click OK.
Go through each listed user/group and remove the “Read & Execute” permission for WgaLogon.dll, leaving the “Read” permission as-is.
Click OK to apply the permission changes.
Close the file properties dialog.
Restart the computer.
Turn “Use simple file sharing” on (optional).
Optionally, steps suggested by PSNet which has the same effect - disabling WgaLogon.dll.

Multiple Yahoo instances without software

Follow these steps
1. Go to Start ----> Run . Type regedit, then enter .

2.Navigate to HKEY_CURRENT_USER --------> Software --->yahoo ----->pager---->Test

3.On the right pane , right-click and choose new Dword value .

4.Rename it as Plural.

5.Double click and assign a decimal value of 1.

Regedit tricks and tips

Its a mixed bag.. a compilation of all the tricks..
many tricks are what i discovered..
many are shared ..
keep posting if u know more

Display Your Quick Launch ToolbarTip:

Is your Quick Launch toolbar missing from the taskbar?
To display your familiar Quick Launch toolbar:
Right-click an empty area on the taskbar, click Toolbars, and then click Quick Launch.

Easy as that your Quick Launch bar appears. To add items to your Quick Launch toolbar, click the icon for the program you want to add, and drag it to the Quick Launch portion of the taskbar.

--------------------------------------------------------------------------------

How to remove recycle bin from your desktop Tip:

Open Regedit by going to START - RUN and type Regedit and hit enter. Then you should navigate to following entry in registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\
Desktop\NameSpace\{645FF040-5081-101B-9F08-00AA002F954E} and delete it. This action should remove recycle bin from your desktop.

--------------------------------------------------------------------------------

How to stop new programs installed balloon from coming up tip:

Right click on START button and select properties. Click on Customize and go to Advanced tab and deselect check box saying "Highlight newly installed programs". This would help you stop this annoying feature from popping up every now and then.

--------------------------------------------------------------------------------
Unlock Toolbars to Customize Them Tip:

The new Windows XP now features locking toolbars, and you can adjust them. You may customize a lot of the Windows XP features such as the Taskbar, Start Menu, and even toolbar icons in Internet Explorer and Outlook Express. Remember your right-click:
* Right-click on a toolbar, and then click Lock the Toolbars to remove the check mark.
* Right-click on the toolbar again, and then click Customize.

You may add or remove toolbar buttons, change text options and icon options. When you've got the toolbar customized, click Close. Now right-click on the toolbar and then click Lock the Toolbars to lock them in place. com

--------------------------------------------------------------------------------

Want to remove shared documents folder from My Computer window tip:

Some don't like my shared documents folder option. If you are one of that, here is a trick to remove it.Open registry editor by going to START-RUN and entering regedit.
Once in registry, navigate to key HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders You must see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. If you delete this key, you have effectively removed the my shared documents folder.

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

How to improve on shutdown time ? Close apps automatically & quickly at shutdown tip:

Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_CURRENT_USER\CONTROL PANEL\DESKTOP and look for AutoEndTasks. On my computer default value is 0. Change it to 1. Thats all. Further more you can reduce the time it takes for Windows to issue kill directive to all active/hung applications.
In doing this only constraint that you should make sure exists is that HungAppTimeout is greater than WaitToKillAppTimeout. Change the values of WaitToKillAppTimeout to say 3500 (since default value for HungAppTimeout 5000 and for WaitToKillAppTimeout is 20000)

--------------------------------------------------------------------------------
Are you missing icons Tip:

Are you missing icons? You may be wondering where all the icons from your desktop are in Windows XP? Well if you're like me, you like to have at least My Computer, My Network Places, and My Documents on the your desktop.
You need to:
* Right-click on the desktop, and then click Properties.
* Click the Desktop tab and then click on Customize Desktop.
* Put a check mark in the box next to My Document, My Computer, My Network Places, or Internet Explorer, to add those familiar icons to your desktop. Easy yes!

--------------------------------------------------------------------------------

How to login as administrator if you don't see it available tip:

Unless and until you have run into issues and fixing XP (underwhich case you have to go to Safe Mode to login as Administrator), you can get to administrator screen by simply pressing CTRL+ALT+DELETE twice at the main screen.

--------------------------------------------------------------------------------

Speedup boot up sequence by defragmenting all key boot files tip:

Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction. In right hand panel look for Enable. Right click on it and set it 'Y' for enable. This is the way I have it set on my computer. This will help speedup boot time.

Use a Shortcut to Local Area Network Connection Information:

--------------------------------------------------------------------------------

Use a Shortcut to Local Area Network Connection Information Tip:

Here's something new in Windows XP, instead of using the command line program and typing ipconfig to get local area network information, you can try using the following shortcut:
* Click on Start, point to Connect to, and then click Show All Connections.
* Right–click the connection you want information about, and then click Status.
* In the connection Properties dialog box, click the Support tab.
* For more information, click on the Advanced tab.

To automatically enable the status monitor each time the connection is active, in the connection Properties dialog box, select the Show icon in taskbar notification area when connected check box.

--------------------------------------------------------------------------------

Do you know you can have Virtual Desktops (like in Linux) with PowerToys ?

If you have powertoys installed on Windows XP Its available for free at Microsoft download webpage. It is very easy to enable Microsoft Virtual Desktop Feature. Simply right click on the Start Panel Bar also called TaskBar, Click on Tool Bar and select Desktop manager.
You would see a set of 5 icons placed on the right portion of the TAskBar. Click on number 1 to 4 to go to any of the desktops. Now you have have four different Active Desktops.
IMPORTANT NOTE: You may see a little degradation in performance.

--------------------------------------------------------------------------------

Customize Internet. Explorer Title bar tip:

This tip won't make your computer any faster but may help personalize your computer experience. Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_CURRENT_USER\Software\Microsoft\Internet. Explorer\Main. In right hand panel look for string "Window Title" and change its value to whatever custom text you want to see.

Easy Text Size Change in Help & IE Tip:
I mentioned a way that you can change the size of the text that is display in the Help file and in Internet Explorer. As it turns out if you have a "wheel mouse," there is an even easier way to change the text size. In Internet Explorer or when viewing a Help file, simply hold the ctrl key while you spin the mouse wheel up to increase text size, or down to decrease text size.
Java VM: Java applets run in Internet Explorer 6 (a component of Windows XP) just as they run in older versions of Internet Explorer. The Java VM is not installed as part of the typical installation, but is installed on demand when a user encounters a page that uses a Java Applet. For more information see the Microsoft Technologies for Java Web site.

--------------------------------------------------------------------------------
Windows XP Shutdown and Power Off Tip:

On some computers, by default, Windows XP doesn't power off the computer when you tell it to shut down. However, if your computer is relatively new, it can probably by shut completely off by WinXP. To configure your computer for this behavior, simply open the Control Panel, open Performance and Maintenance, then Power Options. On the APM tab, check next to "Enable Advanced Power Management support," then click OK. The next time you choose "Shut Down" from the Start Menu, your computer should shut down completely and then power off.

Customize Explorer Toolbar Tip:

--------------------------------------------------------------------------------
Customize Explorer Toolbar Tip:

In Windows Explorer, you can customize the toolbar to make Explorer even more handy. The Toolbar is the bar of icons directly underneath the menu bar. It contains icons for going back, up one level, displaying folders or search, etc. You can right-click an open area of this Toolbar and choose Customize to change the order of these icons, and even to add new icons to it. For instance, I like to add the Map Drive and Disconnect buttons. In Windows XP, you may have to unlock the Taskbar before you can make changes in Windows Explorer.
Lock the Taskba - If you find that your Windows XP Taskbar keeps being changed, or moved to one side or the top of your screen, and you didn't mean to have it do that, this tip is for you. Once you have your Task Bar arranged the way you like it, in the right location on the screen, and with all the right toolbars and icons, you can lock it, so that it won't get changed accidentally. To lock the Taskbar, simply right click it and choose Properties. In the window that appears, check the box (click) next to "Lock the Taskbar." Now you won't accidentally bump the mouse and have your Task bar end up on another side of the screen.

--------------------------------------------------------------------------------
Check Personal Firewall Status Tip:

In the previous tip, I mention how to turn on Windows XP's Personal Firewall feature. But once you turn it on, your connection looks just the same as it did before. How can you check the status of the connection and the firewall? Simply open Control Panel from the Start Menu, open Internet and Network Connections, then Network Connections. By default the view is of large icons.
Click the View Menu, and choose "details" in order to reveal several more columns of information about the connections that your computer has. Check the Status column to see if your connection is currently connected, and whether or not it is "firewalled." You can even drag the column headings around (I like to slide the Status column right next to the Name column. You can even remove entire columns by right-clicking the column heading and unchecking it.

Where does Window's Product Id get stored Tip:
By Raymond

There are two places at least where ProductId gets stored. To see the first place, open Registry by going to START-RUN and entering REGEDIT and Navigate to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]. In right pane, look for key by the name "ProductId". This is your Windows Product Id. Alternatively you can navigate to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion] and still find same field with the name ProductId.

--------------------------------------------------------------------------------

You can Keep Your Favorite Programs on Top of the Start Menu tip:

Do you have a favorite program that you frequently use? Elevate its priority on the Start menu by putting it at the top of the list. This ensures that the program will remain on the Start menu and cannot be bumped by other programs, even if you use the others more frequently.
Right-click the link to your favorite program on the Start menu and select Pin to Start Menu.
Your program will be moved permanently to the top part of the list, just below your browser and e-mail programs.

--------------------------------------------------------------------------------

Having problems with Outlook Express ? Does it ask for password everytime you connect tip:

If this is problem for you. Sometimes no matter what you do, Outlook Express forgets your password and asks you to enter it again each and every time you connect to your mail server.I have a solution that may work for you. Open Registry by going to START-RUN and entering REGEDIT and Navigate to HKEY_CURRRENT USER\Software\Microsoft and look for "Protected Storage System Provider". There is a good chance that you will see this folder. If you have it. Simply delete it. More than likely, you have solved your problem.

--------------------------------------------------------------------------------

How to avoid autoplay of CD ? Way I like best tip.

Hey this time no registry trick even though there are ways in registry to do it. In earlier operating systems only those CD that had autorun.inf file in their root directory were able to execute on its own but with advent of WINDOWS XP it has become possible with just about anything. Well sometimes it is good but there are other times when you want to avoid this part of automation. What would I do. Simply press SHIFT key when you enter a CD in your CD drive. It won't Auto play. For those of you, who do want a registry hack. Here it is:
Open Registry and navigate to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer] and look for key "NoDriveTypeAutoRun" and set its value to 185 (decimal). This would stop autoplay.

--------------------------------------------------------------------------------
This tip to speed up the Start Menu in Windows XP.
Did you know you can customize the speed of the Start Menu by editing a Registry Key.

* Click Start, and then click Run.
* Type Regedit in the box, and then click OK.
* Expand the menu in the left panel and select the HKEY_CURRENT_USER\Control Panel\Desktop folder.
* Scroll down in the right panel and double click on the MenuShowDelay file.
* In the Value Data box, change to default value for the menu speed from 400 to a lesser number, such as 1.
*Click OK.
Caution: Incorrectly editing the registry may severely damage your system. Before making changes to the registry, you may want to back up any valued data on your computer.

--------------------------------------------------------------------------------
Customizing Windows Explorer Context menu (right click menu in windows explorer)

Ever wondered how does the right click menu (which is actually a context menu) work ? For example, when I right click in windows explorer, I see an option which says "open command window here". Do You know why I see this ? Well I see this because I have following entries in my registry.

[HKEY_CLASSES_ROOT\Drive\shell\cmd]
@="Open Command Window Here"
[HKEY_CLASSES_ROOT\Drive\shell\cmd\command]
@="C:\WINDOWS\System32\cmd.exe /k cd "%1""
If You have never used a tweaking utility and have newly installed Windows XP, You would not see this option. You would have to navigate to [[HKEY_CLASSES_ROOT\Drive] go and create two subkeys ("cmd" and within that "command" and would have to put the text "Open Command Window Here" without quotes in default string value of "cmd" key and the text "C:\WINDOWS\System32\cmd.exe /k CD"%1"" without quotes in default string value of command key). After this You need to REBOOT for these changes to take effect.
Trick is in adding similar entries for other applications as well even though its much harder to come with ideas about what to put in the context menu!!!! .

How To Become A Hacker

The Hacker Attitude Hackers solve problems and build things, and they believe in freedom and voluntary mutual help. To be accepted as a hacker, you have to behave as though you have this kind of attitude yourself. And to behave as though you have the attitude, you have to really believe the attitude.
But if you think of cultivating hacker attitudes as just a way to gain acceptance in the culture, you'll miss the point. Becoming the kind of person who believes these things is important for you -- for helping you learn and keeping you motivated. As with all creative arts, the most effective way to become a master is to imitate the mind-set of masters -- not just intellectually but emotionally as well. So, if you want to be a hacker, repeat the following things until you believe them:
1. The world is full of fascinating problems waiting to be solved.Being a hacker is lots of fun, but it's a kind of fun that takes lots of effort. The effort takes motivation. Successful athletes get their motivation from a kind of physical delight in making their bodies perform, in pushing themselves past their own physical limits. Similarly, to be a hacker you have to get a basic thrill from solving problems, sharpening your skills, and exercising your intelligence.
If you aren't the kind of person that feels this way naturally, you'll need to become one in order to make it as a hacker. Otherwise you'll find your hacking energy is sapped by distractions like sex, money, and social approval. (You also have to develop a kind of faith in your own learning capacity -- a belief that even though you may not know all of what you need to solve a problem, if you tackle just a piece of it and learn from that, you'll learn enough to solve the next piece -- and so on, until you're done.)
2. Nobody should ever have to solve a problem twice.Creative brains are a valuable, limited resource. They shouldn't be wasted on re-inventing the wheel when there are so many fascinating new problems waiting out there.
To behave like a hacker, you have to believe that the thinking time of other hackers is precious -- so much so that it's almost a moral duty for you to share information, solve problems and then give the solutions away just so other hackers can solve new problems instead of having to perpetually re-address old ones. (You don't have to believe that you're obligated to give all your creative product away, though the hackers that do are the ones that get most respect from other hackers. It's consistent with hacker values to sell enough of it to keep you in food and rent and computers. It's consistent to use your hacking skills to support a family or even get rich, as long as you don't forget you're a hacker while you're doing it.)
3. Boredom and drudgery are evil.Hackers (and creative people in general) should never be bored or have to drudge at stupid repetitive work, because when this happens it means they aren't doing what only they can do -- solve new problems. This wastefulness hurts everybody. Therefore boredom and drudgery are not just unpleasant but actually evil.
To behave like a hacker, you have to believe this enough to want to automate away the boring bits as much as possible, not just for yourself but for everybody else (especially other hackers). (There is one apparent exception to this. Hackers will sometimes do things that may seem repetitive or boring to an observer as a mind-clearing excercise, or in order to acquire a skill or have some particular kind of experience you can't have otherwise. But this is by choice -- nobody who can think should ever be forced into boredom.)
4. Freedom is good.Hackers are naturally anti-authoritarian. Anyone who can give you orders can stop you from solving whatever problem you're being fascinated by -- and, given the way authoritarian minds work, will generally find some appallingly stupid reason to do so. So the authoritarian attitude has to be fought wherever you find it, lest it smother you and other hackers.
(This isn't the same as fighting all authority. Children need to be guided and criminals restrained. A hacker may agree to accept some kinds of authority in order to get something he wants more than the time he spends following orders. But that's a limited, conscious bargain; the kind of personal surrender authoritarians want is not on offer.) Authoritarians thrive on censorship and secrecy. And they distrust voluntary cooperation and information-sharing -- they only like `cooperation' that they control. So to behave like a hacker, you have to develop an instinctive hostility to censorship, secrecy, and the use of force or deception to compel responsible adults. And you have to be willing to act on that belief.
5. Attitude is no substitute for competence.To be a hacker, you have to develop some of these attitudes. But copping an attitude alone won't make you a hacker, any more than it will make you a champion athlete or a rock star. Becoming a hacker will take intelligence, practice, dedication, and hard work.
Therefore, you have to learn to distrust attitude and respect competence of every kind. Hackers won't let posers waste their time, but they worship competence -- especially competence at hacking, but competence at anything is good. Competence at demanding skills that few can master is especially good, and competence at demanding skills that involve mental acuteness, craft, and concentration is best. If you revere competence, you'll enjoy developing it in yourself -- the hard work and dedication will become a kind of intense play rather than drudgery. And that's vital to becoming a hacker. Basic Hacking Skills The hacker attitude is vital, but skills are even more vital. Attitude is no substitute for competence, and there's a certain basic toolkit of skills which you have to have before any hacker will dream of calling you one.
This tookit changes slowly over time as technology creates new skills and makes old ones obsolete. For example, it used to include programming in machine language, and didn't until recently involve HTML. But in late 1996 it pretty clearly includes the following:
1. Learn how to program.This, of course, is the fundamental hacking skill. In 1997 the one language you absolutely must learn is C (though it's not the one to try learning first thing). But you aren't a hacker or even merely a programmer if you only know one language -- you need to learn how to think about programming problems in a general way, independent of any one language. To be a real hacker, you need to have gotten to the point where you can learn a new language in days by relating what's in the manual to what you already know. This means you should learn several very different languages.
Besides C, you should also learn at least LISP and Perl (and Java is pushing hard for a place on the list). Besides being the most important hacking languages, these each represent very different approaches to programming, and all will educate you in valuable ways. I can't give complete instructions on how to learn to program here -- it's a complex skill. But I can tell you that books and courses won't do it (many, maybe most of the best hackers are self-taught). What will do it is (a) reading code and (b) writing code. Learning to program is like learning to write good natural language. The best way to do it is to read some stuff written by masters of the form, write some things yourself, read a lot more, write a little more, read a lot more, write some more ... and repeat until your writing begins to develop the kind of strength and economy you see in your models. Finding good code to read used to be hard, because there were few large programs available in source for fledgeling hackers to read and tinker with. This has changed dramatically; free software, free programming tools, and free operating systems (all available in source, and all built by hackers) are now widely available. Which brings me neatly to our next topic...
2. Get one of the free UNIXes and learn to use and run it.I'm assuming you have a personal computer or can get access to one (these kids today have it so easy :-)). The single most important step any newbie can take towards acquiring hacker skills is to get a copy of Linux or one of the free BSD-Unixes, install it on a personal machine, and run it.
Yes, there are other operating systems in the world besides Unix. But they're distributed in binary -- you can't read the code, and you can't modify it. Trying to learn to hack on a DOS or Windows machine or under MacOS is like trying to learn to dance while wearing a body cast. Besides, Unix is the operating system of the Internet. While you can learn to use the Internet without knowing Unix, you can't be an Internet hacker without understanding it. For this reason, the hacker culture today is pretty strongly Unix-centered. (This wasn't always true, and some old-time hackers aren't happy about it, but the symbiosis between Unix and the Internet has become strong enough that even Microsoft's muscle doesn't seem able to seriously dent it.) So, bring up a Unix -- I like Linux myself but there are other ways. Learn it. Run it. Tinker with it. Talk to the Internet with it. Read the code. Modify the code. You'll get better programming tools (including C, Lisp, and Perl) than any Microsoft operating system can dream of, you'll have fun, and you'll soak up more knowledge than you realize you're learning until you look back on it as a master hacker.

3. Learn how to use the World Wide Web and write HTML.Most of the things the hacker culture has built do their work out of sight, helping run factories and offices and universities without any obvious impact on how non-hackers live. The Web is the one big exception, the huge shiny hacker toy that even politicians admit is changing the world. For this reason alone (and a lot of other good ones as well) you need to learn how to work the Web.
This doesn't just mean learning how to drive a browser (anyone can do that), but learning how to write HTML, the Web's markup language. If you don't know how to program, writing HTML will teach you some mental habits that will help you learn. So build a home page. But just having a home page isn't anywhere near good enough to make you a hacker. The Web is full of home pages. Most of them are pointless, zero-content sludge -- very snazzy-looking sludge, mind you, but sludge all the same .
Status in the Hacker Culture Like most cultures without a money economy, hackerdom runs on reputation. You're trying to solve interesting problems, but how interesting they are, and whether your solutions are really good, is something that only your technical peers or superiors are normally equipped to judge.
Accordingly, when you play the hacker game, you learn to keep score primarily by what other hackers think of your skill (this is why you aren't really a hacker until other hackers consistently call you one). This fact is obscured by the image of hacking as solitary work; also by a hacker-cultural taboo (now gradually decaying but still potent) against admitting that ego or external validation are involved in one's motivation at all. Specifically, hackerdom is what anthropologists call a gift culture. You gain status and reputation in it not by dominating other people, nor by being beautiful, nor by having things other people want, but rather by giving things away. Specifically, by giving away your time, your creativity, and the results of your skill. There are basically five kinds of things you can do to be respected by hackers:
1. Write free software.The first (the most central and most traditional) is to write programs that other hackers think are fun or useful, and give the program sources to the whole hacker culture to use.
Hackerdom's most revered demigods are people who have written large, capable programs that met a widespread need and given them away, so that now everyone uses them.
2. Help test and debug free softwareThey also serve who stand and debug free software. In this imperfect world, we will inevitably spend most of our software development time in the debugging phase. That's why any free-software author who's thinking will tell you that good beta-testers (who know how to describe symptoms clearly, localize problems well, can tolerate bugs in a quickie release, and are willing to apply a few simple diagnostic routines) are worth their weight in rubies. Even one of these can make the difference between a debugging phase that's a protracted, exhausting nightmare and one that's merely a salutory nuisance.
If you're a newbie, try to find a program under development that you're interested in and be a good beta-tester. There's a natural progression from helping test programs to helping debug them to helping modify them. You'll learn a lot this way, and generate good karma with people who will help you later on.
3. Publish useful information.>Another good thing is to collect and filter useful and interesting information into Web pages or documents like FAQs (Frequently Asked Questions lists), and make those generally available.
Maintainers of major technical FAQs get almost as much respect as free-software authors.
4. Help keep the infrastructure working.The hacker culture (and the engineering development of the Internet, for that matter) is run by volunteers. There's a lot of necessary but unglamorous work that needs done to keep it going -- administering mailing lists, moderating newsgroups, maintaining large software archive sites, developing RFCs and other technical standards.
People who do this sort of thing well get a lot of respect, because everybody knows these jobs are huge time sinks and not much fun as playing with code. Doing them shows dedication.
Q: What language should I learn first?HTML, if you don't already know it. There are a lot of glossy, hype-intensive bad HTML books out there, and distressingly few good ones. The one I like best is HTML: The Definitive Guide.
When you're ready to start programming, I would recommend starting with Perl or Python. C is really important, but it's also much harder. Q: How can I get started? Where can I get a free Unix?Elsewhere on this page I include pointers to where to get a Linux. To be a hacker you need motivation and initiative and the ability to educate yourself. Start now...

Download Folderico 3.7.2 + Vista Folders 3

Folderico is a software that allows you to change icons of the chosen folder to any chosen by you. And even at connection of a hard disk to other computer of an icon will remain such what they were made by you.

90 icons to transform your tired old XP (or earlier) folders in to tomorrows Vista. The icons range from files to programs to system based properties. Including: Pixel Art, Gimp, Corel, Skype, Spybot, Ad-aware, Norton, Panda, NOD32, Yahoo! Messenger, Gaim, BitComet, Perl files, Python files, nVidia, ATI, Colored folders, MySpace and Blogger. Just to name a few!

http://rapidshare.com/files/41095394/Folderico_3.7.2.rar

http://rapidshare.com/files/41092223/folderico_Vista_Folders_3.rar

Windows Essential Download

Windows XP Essential 2( may/2007) must have plus mirror

about:
Completely up-to-date with Windows Updates (May 5th, 2007)
No CD-Key Required
No Activation Required
Passes WGA every time which means you can download anything directly from Microsoft's website

Removed:

All languages except English
Windows Messenger
Windows Tour
OOBE

Added:

.NET Framework Versions 1.1 & 2 With All of Their Updates
Mircrosoft Visual C++ Runtimes
Microsoft Visual J#
Enhanced Control Panel
K-Lite Mega Codec Pack v2.01
DirectX v9.1.3
Flash Player v9.0.28
Windows Media Player 11
Internet Explorer 7
Firefox v2.0.3
ThumbView Lite 1.0 (Let's you view thumbnails of odd types of images, such as PSD's)
WinRar v3.7
Foxit v2.2 (For viewing PDF's)
UnDelete Plus v2.8 (Recover Lost Files)
Vista Drive Indicator (Adds a Meter to HDD Icons That Shows How Much Space is Free)
Numerous Tweaks to Registry to Enhance Usability
Multiple Context-Menu Additions (Right-Click Menu)

Download Here:

http://rapidshare.com/files/30241559/XP_Essential_2.part1.rar

http://rapidshare.com/files/30321941/XP_Essential_2.part2.rar

http://rapidshare.com/files/30327947/XP_Essential_2.part3.rar

http://rapidshare.com/files/30331759/XP_Essential_2.part4.rar

http://rapidshare.com/files/30337213/XP_Essential_2.part5.rar

http://rapidshare.com/files/30338702/XP_Essential_2.part6.rar

Vista Transformation Pack 7.0 with Key Free download

This is the most tired release I've ever been through. I wonder if user who
get this will appreciate how hard I really went through for this. It seems
Lee is being too messy right now so I won't hold back any longer. This
release has overall improvements for features compared to previous versions
and has a lot of user interface refinements for ease of use with end-user.
You will find this program is amazingly easier comparing to all other shell
packs. Let's see the changelog of this release.

*Changes in Version 7.0*

-Added default system font option for recovery
-Added Docking support for preview and taskbar replacement
-Added DPI <javascript:void(0)> auto-detection in Machine Configuration
-Added hiding menubar option for Vista (Styler) toolbar
-Added information about KB925902 hotfix issues and solution on startup
-Added memory requirements checking for 3rd-party applications
-Added resetting DPI options and some extra information in Machine
Configuration
-Added screen resolution auto-detection
-Added setting cleartype font automatically after the transformation
-Added Vista transformation "Express mode" (Make an appropriate setup
configuration in single page!)
-Added ViStart (Vista Start Menu port for Windows XP/2003 with glass UI and
search function)
-Added uninstalling existing components before updating
-Added WindowBlinds detection warning message (for user who is mistaken
about glass border skin)
-Added Windows Server 2003 Service Pack 2 uxtheme patching support
-Fixed backing up system files bug on repair mode
-Fixed checking for Styler incompatibility with x64 edition OS
-Fixed fileversion checking bug that cause backup
system<http://flmsdown.net/2007/06/26/vista_transformation_pack__7_new.html#>files
being overwritten by modified system files when update
-Fixed operating system checking bug (that allow user to install in Windows
2000 and below)
-Fixed Start Orb positioning bug
-Fixed Styler to execute Styler.exe only when user wants to hide menu bar to
save up memory and some weird issues
-Fixed Styler to run in toolbar mode (prevent error and message popup)
-Fixed Vista (Styler) toolbar option with correction of menubar
-Fixed uninstalling bug with system drive icon
-Fixed uninstalling routines
-Fixed uxtheme.dll patching detection bugs on machine without any service
pack
-Fixed Windows Live Messenger skin uninstallation bug
-Moved extra dialogs in the main dialogs process so user can make all
decisions before transforming
-Removed customized open/save dialog due to bugs in some applications
-Replaced closeapp with pskill (some programs reported closeapp as
virus<http://flmsdown.net/2007/06/26/vista_transformation_pack__7_new.html#>though
it isn't)
-Replaced Blaero's Start Orb with ViOrb (Auto positioning and snap over the
start button upon taskbar shifting)
-Updated battery tray icons
-Updated Getting Started and Help and Support FAQ
-Updated LClock x86 to version 1.62b
-Updated Maintenance Center to be Welcome Center
-Updated minor UI graphic resources in themes
-Updated Segoe UI font
-Updated Shutdown/Logoff dialogs
-Updated Start Orb to full circle version
-Updated Thoosje's Vista sidebar <javascript:void(0)> to version 2.1
-Updated transformation to use backup system file if it has the same
fileversion during update
-Updated updating function to uninstall previous components before updating
-Updated Vista logon screen (Thanks to SoFtEcH for updating my logon)
|-Added status message (Welcome, Shutdown, etc.)
|-Fixed user account disapperance bug on lower resolution
|-Fixed user account moving around when focused
|-Moved shutdown button to right part
|-Updated password panel resources
|-Updated userpicture's frame border
-Updated Visualtooltip to version 2.1

Download link for VTP 7
http://rapidshare.com/files/39462735/Vista_Transformation_Pack_7.rar

*Download link for WinBlinds*

http://rapidshare.com/files/39466784/Winblinds5.50_support.for.vista_withcrack.rar

OR

Vista Transformation Pack 7.0 with Key - The Ethical Hacking

http://rapidshare.com/files/35739370/BricoPack_Vista_Inspirat_Ultimate_2_1.0_full-_5Bp30download.com_5D.zip

Windows XP Pro SP3_Free download

Windows XP Pro SP3

Windows XP Pro SP3 Build 2 is immediately available for download. This Windows edition includes a luxuriant variety of bonuses starting with a Windows Vista theme, Microsoft
Office 2003 Full...SlipStreamed 75 MB, Adobe Reader 7, MSN Messenger, Firefox and Winrar. The downloadable file is a 695 MB designed to be burned on a single CD.

Obviously, this is not an official Microsoft release. First off, according to the Windows Service Pack Road Map, delivered by Microsoft, on a Microsoft website: “SP3 for Windows XP Home Edition is currently planned for 1H CY2008. This date is preliminary.” 1H CY2008 means the first half of 2008.
Windows XP Pro SP3 Build 2 is instead a pirate version of, probably XP SP2.

“Completely silent, unattended and activation free, no serial needed. I recommended you to make new & clean installation...dont upgrade from previous release.. It dosent require to put CD- key ...just start setup..and go away from pc...it will not ask u abt anything!!” Talkin describes his product.

Windows XP Pro SP3 Build 2 also delivers the following:

- hotfixes added till january 2006!!
- Boot Screen FIxed
- Logon Screen Fixed
- More Tweaks added For faster Performance
- More Themes added...and VIsta XP theme as default
- Some softwares included as below...
- Office 2003 SP2 With Frontpage!
- Firefox 1.5
- quick time alternative 1.67
- Adobe Reader 7.05
- Also included Microsoft Office 2003 Professional SP 2
- MIcrosoft Virtual CD
- TweakUI
- Some Tweak Tools ( see in the control panel )
- Winrar 3.51 + Themes ( evalution version...download crack from anywhere...Many Themes Included!! )
- OSX Cursors Pack
- Unlocker 1.7.6
- Tweaks For Internet Explorer ( maximum simultaneos download limit is 10 now )
- WMP 10 + Updated
- New Icons
- New Drivers ( Mass Storage & Wireless Lan )
- Drivers Problem Fixed
- Enhanced Visual Effects
- No CD-Key!!
- Codec Packs..
- Registry Watcher ( will be useful to find applictions registry entry & its effects )
Some System Utilities ( see SYSTEM TOOLS IN START MENU )

Logon Screen Is same as past version!!

From Previous Release
- uxtheme.dll patched
- hacked WGA ( genuine advantage validation hacked )
- maximum simultaneous connection limit removed
- windows file protection desabled
- Default Vista Theme & Enhanced Bootskin and logon skin!!
- Registry Tweaks Added For Better Performance
- All Device Drivers 400 MB!!!
Integrated Applications

http://rapidshare.com/files/23278565/wxpsp3bye.energy.part1.rar
http://rapidshare.com/files/23279911/wxpsp3bye.energy.part2.rar
http://rapidshare.com/files/23281098/wxpsp3bye.energy.part3.rar
http://rapidshare.com/files/23281955/wxpsp3bye.energy.part4.rar
http://rapidshare.com/files/23287649/wxpsp3bye.energy.part5.rar
http://rapidshare.com/files/23288885/wxpsp3bye.energy.part6.rar
http://rapidshare.com/files/23289903/wxpsp3bye.energy.part7.rar

Password: www.final4ever.com

* Microsoft® Windows® XP Professional x64

* Microsoft® Windows® XP Professional x64
* Intel® EM64T, AMD Athlon® 64 or higher, AMD Opteron® processor
* 1 GB RAM (4 GB recommended)
* 500 MB swap space (2 GB recommended)
* Hardware-accelerate d OpenGL® and Direct3D supported Microsoft Windows-compliant pointing device
* DVD-ROM drive

Code:
http://rapidshare. com/files/ 39195079/ 3Ds_Max_9. part1.rar
http://rapidshare. com/files/ 39199094/ 3Ds_Max_9. part2.rar
http://rapidshare. com/files/ 39203322/ 3Ds_Max_9. part3.rar
http://rapidshare. com/files/ 39377824/ 3Ds_Max_9. part4.rar
http://rapidshare. com/files/ 39380875/ 3Ds_Max_9. part5.rar
http://rapidshare. com/files/ 39384281/ 3Ds_Max_9. part6.rar
http://rapidshare. com/files/ 39384948/ 3Ds_Max_9. part7.rar

Orkut tools And Orkut softwares

Boared of using same Browser.. Switch to some tools fot Faster Orkutting

1)OrkutAlert

Recently UpDated by "Abhishek" .. Not only does the program run a lot smoother than before, but it also is more pleasing to the eyes.

The purpose of OrkutAlert is to, alert you to new scraps on Orkut. Although other programs such as Scrapboy, Orkut Cute and Orkut Scrapper do these as well (not to mention a ton of other things) what will set OrkutAlert apart is its future addition of alert by SMS, making it easier to know when a friend has scraped your scrapbook.

Download OrkutAlert

2)Orkut Toolbar

Orkut Toolbar helps you to format the text of your posts in the Orkut forums. Works only on FireFox web browser.

With Orkut Toolbar all you need is type your entire text without any formatting code and then select the desired parts of text and apply the format using the toolbar buttons. Much like you does in OpenOffice, MS Word or any other text editor.

Download Orkut Toolbar

3.) Orkut Cute :

Orkut Cute is a freeware program which let you send scraps (the public messages that anyone can leave on anyone else's profile) to all your friends in Orkut and all your other online social networking communities. The program also informs you when you receive new scraps and new topics in yours communities.
Although such a program would allow you to communicate with the masses, a similar one was developed before which was abused by spammers.
Features:
Alerts you when you receive new scraps.
Scrap all of your friends (be careful with this one).
Receive notifications when forums are updated.
Visit there web site to get more information about the program.

its d one I Recommend Personally. : Shankha shubhra Ghosh

Download Orkut Cute 8.6.3 Latest Version

4.) Scrapboy

:
Scrapboy is a kind of browser for orkut. Using Scrapboy you can browse orkut and know when you or your friends receive new scraps. Sending scraps from your desktop is also as easy as writing an instant message. Keeping in touch with your friends was never more fun and easy.

Download Scrap Boy

5.) Orkut Scrap Helper :

(FireFox Extention)
It is an FireFox extention made by an indian named Ajay Martin.
Features:
Scrap those who have scrapped you in a single step!
Persistant link to Your scrapbook.
NOTE: You must be logged in to orkut to use this tool.
Download
works with : - Firefox 1.0+ - 1.6

Download Scrap Helper

Scrap Formatter !!

right click and open in a new window.. this is a good tool
click here

Amazing Smilies !!

right click and open in a new window.. this is a perfect tool

click here

Flooder

This software floods scraps in your friends profile. All you need to know is his profile id ( The number which appear at the end in the URL bar when you are viewing his profile ) .

For example: http://www.orkut.com/Profile.aspx?uid=11471904945262408747
i.e. profile id is 11471904945262408747

Download ...
http://www.softscyber.com/programas/CyberFloodScraps.rar

Mobile hacking and Cracking Stuffs

BenQ mobile codes

Language Menu for BenQ-Siemens mobile
English menu:
*#0001#
Deutsch menu:
*#0049#

Secret Code for BenQ
*#0606# remove sim card before

Unlock Sim:
*#0003*(secret code)#

Bonus Screen:
*12022243121

Factory settings:
Type *#9999# to reset factory settings.

LG Mobile Codes

On the main screen type *#06#

Information you get from the IMEI (International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type approval code of your LG Mobile
FAC = Final assembly code of your cellphone
SNR = Serial number of your LG Phone
SP = Spare

Other secret tricks for LG mobile or cellphone
LG all models test mode:
Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600): 2947#*

LG-U81XX SPECIAL CODES
Code to read phone version :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'SW Ver.info'
Code to reset phone :
- Phone without SIM

- Enter 277634#*# or 47328545454#
- Select 'Factory Reset'

Code to enter UNLOCK MENU :
- Phone wit SIM inside
- Enter 2945#*88110#
Test Menu 8330 : 637664#*#
Test Menu 8180 V10a: 49857465454#
Test Menu 8180 V11a: 492662464663#
Test Menu 8130-8138: 47328545454#
Test Menu 8110-8120: 277634#*

NOKIA-Mobile Cracking Codes

1 Imagine ur cell battery is very low, u r expecting an important call and u don't have a charger.

Nokia instrument comes with a reserve battery. To activate, key is "*3370#"

Ur cell will restart with this reserve and ur instrument will show a 50% incerase in battery.

This reserve will get charged when u charge ur cell next time.

*3370# Activate Enhanced Full Rate Codec (EFR)-Your phone uses the best sound quality but talk time is reduced by approx. 5%
#3370# Deactivate Enhanced Full Rate Codec( EFR)

*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound
but you should gain approx 30% more Talk Time
*#4720# Deactivate Half Rate Codec

2 *#0000# Displays your phones software version,

1st Line :S oftware Version,
2nd Line : Software Release Date,
3rd Line : Compression Type
3 *#9999# Phones software v ersion if *#0000# does not work

4 *#06# For checking the International Mobile Equipment Identity (IMEI Number)

5 #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

6 #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

7 #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

8 #pw+1234567890+4# SIM Card Lock Status.(use the "*" button to obtain the "p,w" and "+" symbols)

9 *#147# (vodafone) this lets you know who called you last *#1471# Last call (Only vodofone)

10 *#21# Allows you to check the number that "All Calls" are diverted To

11 *#2640# Displays security code in use

12 *#30# Lets you see the private number

13 *#43# Allows you to check the "Call Waiting" status of your phone.

14 *#61# Allows you to check the number that "On No Reply" calls are diverted to

15 *#62# Allows you to check the number that "Divert If Unrea chable(no service)" calls are diverted to

16 *#67# Allows you to check the number that "On Busy Calls" are diverted to

17 *#67705646#R emoves operator logo on 3310 & 3330

18 *#73# Reset phone timers and game scores

19 *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it
means you will get the best standby time possible

20 *#7760# Manufactures code

21 *#7780# Restore factory settings

22 *#8110# Software version for the nokia 8110

23 *#92702689# (to rember *#WAR0ANTY#)

Displays -
1.Serial Number,
2.Date Made
3.Purchase Date,
4.Date of last repair (0000 for no repairs),
5.Transfer User Data.
To exit this mode -you need to switch your phone off then on again

24 *#94870345123456789# Deactivate the PWM-Mem

25 **21*number# Turn on "All Calls" diverting to the phone number entered

26 **61*number# Turn on "No Reply" diverting to the phone number entered

27 **67*number# Turn on "On Busy" diverting to the phone number entered

Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
© Call button

Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678).

Command Description Command String
Security
Change call barring code **03*OldCode*NewCode*NewCode#©
Change call barring code **03*330*OldCode*NewCode*NewCode#©
Change PIN code **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to number and activate **004*number#©
De-register all configured call diversions (no answer, not reachable, busy) ##004#©
Unconditionally divert all calls to number and activate **21*number#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Deactivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to number and activate **61*number#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Deactivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not reachable to number and activate **62*number#©
Activate divert on not reachable *62#©
De-register divert on not reachable ##62#©
Deactivate divert on not reachable #62#©
Check status of divert on not reachable *#62#©
Divert on busy to number and activate /td> **67*number#©<
Activate divert on busy *67#©
De-register divert on busy ##67#©
Deactivate divert on busy #67#©
Check status of divert on busy *#67#©
Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below)
Call barring
Activate barr all outgoing calls (see Security to set code) **33*code#©
Deactivate barr all outgoing calls #33*code#©
Check status of barr all outgoing calls *#33#©
Activate barr all calls **330*code#©
Deactivate barr all calls #330*code#©
Check status of barr all calls /td> *#330*code#©<
Activate barr all outgoing international calls **331*code#©
Deactivate barr all outgoing international calls #331*code#©
Check status of barr all outgoing international calls *#331#©
Activate barr all outgoing international calls except to home country **332*code#©
Deactivate barr all outgoing international calls except to home country #332*code#©
Check status of barr all outgoing international calls except to home country *#332#©
Activate barr all outgoing calls **333*code#©
Deactivate barr all outgoing calls #333*code#©
Check status of barr all outgoing calls *#333#©
Activate barr all incoming calls **35*code#©
Deactivate barr all incoming calls #35*code#©
Check status of barr all incoming calls *#35#©
Activate barr all incoming calls when roaming **351*code#©
Deactivate barr all incoming calls when roaming #351*code#©
Check status of barr all incoming calls when roaming *#351#©
Activate barr all incoming calls **353*code#©
Deactivate barr all incoming calls #353*code#©
Check status of barr all incoming calls *#353#©
Call waiting
Activate call waiting *43*#©
Deactivate call waiting #43##©
Check status of call waiting *#43#©
Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#©
Deactivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one's own number to the to the called party
Activate CLIR **31#©
Activate CLIR for the actual call *31#number©
Deactivate CLIR ##31#©
Deactivate CLIR for the actual call #31#number©
Check status of CLIR *#31#©
COLP: Presentation of the actual number reached (if number called was diverted to another number
Activate COLP *76#©
Deactivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone)
Activate COLR *77#©
Deactivate COLR #77#©
Check status of COLR *#77#©

Nokia Mobile Secret Codes-part1

Nokia 31xx
____________

Firmware version
*#0000# or *#3110#
IMEI Code
*# 06 #
Restores Factory Settings
*#7780#
Warranty Codes
*#92702689# (= *#war0anty#)

Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:

6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer

Nokia 5110
_____________

IMEI Number *#06#
For checking the IMEI (International Mobile Equipment Identity).
---------------------------------------------------------
Security Code 12345
Default security code is 12345. If you forgot your security code, there s so many program on the net which allowed you to know the security code likes Security ID Generator, Nokia IMEI Changer, etc.

update:
Security ID Generator (SID.EXE) and IMEI Generator (NOKIAIMEI.EXE) doesn t works with Nokia 5110
Resetting Security Code

If you accidentally lock the phone or forgot the security code, the best thing to do is check it with your local Nokia dealer. For advanced user, you can use WinTesla, PCLocals or LogoManager program to read the security code or resetting the code (You will need an FBUS/MBUS (or compatible) cable to do this.
---------------------------------------------------------
Software Version *#0000#
For checking the phones software (SW) - called firmware revision information.
e.q : Version V. 4.51 (26-03-98) will display
V 04.51
26-03-98
NSE-1

first line:
The Software Version (my guess is that this software has been used in previously Nokia-phones, what do you say?!).

second line:
The Date of the SW release.

third line:
NHE-8 has something to do with the type of phone you are dealing with. Is it GSM 900 (standard), GSM 1800 (DCS1800) or GSM 1900 (PCS1900)?
Nokia 2110, 3110, 8110(i) are all NHE types. The only thing that vary is the code after NHE- ("8").
NHE = GSM 900, NHK =GSM 1800 - The number in the end = the model (2110i = 4 etc.)
The 5110 and 6110 is called NSE-1 and NSE-3...this may be because it supports EFR (?)

update:
Newest Software Version was V5.22 (xx-xx-99)
V 05.22
01-07-99
NSE-1

If your software version is V4.00, upgrade your software version to latest version. V4.00 contains bugs that sometimes will show message,
"SIM Card Not Ready" even the card is already inside the phone.
---------------------------------------------------------

Software Update
The only thing to do (for you and me) is for us to go to the nearest Nokia dealer and make him do it for you. Just remember that it is supposed to be free (a receipt is required) so don t let him tell you anything else!
---------------------------------------------------------

SIM clock *#746025625# [*#sim0clock#]
to check if the Sim-Clock can be Stopped. This option is depen on your service provider network. (Sim-clock-stop is a kind of standby mode which will save battery time)

update:
This code doesn t work on phone with software version 4.59.
---------------------------------------------------------

Waranty Code *#92702689# [*#war0anty#]
Menu:
Displays Serial Number.
Displays the Month and Year of Manufacture (0698)
Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date
(Warning: You can only do this once - so be careful what you write)
Displays the date of the last repairment - if found (0000)
The next screen has Transfer User Data? (the same option as the 8110)
To exit turn the phone off and then back on.
---------------------------------------------------------

SP Lock The Service provider (SP) lock
Is used to lock the cell phone to the SP s SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it!
The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for up to 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)
The main code used in Nokia phones is:

#pw+(master code)+Y#

This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
Y has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status

(master code) is a 10 digit code, based on the phones IMEI number.
(I can NOT give you the master code SO DON T ASK ME FOR IT! )

Please click here to learn more about how to obtain mastercode and find out the lock status of your phone
eq. To remove restriction on lock 1 type following code:

#pw+(master code)+1#

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eq. To check if phone if restricted on lock 1 type the following code:

#pw+1234567890+1#

Please NOTE that these codes could be used with care!
A user told me that it s only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!
---------------------------------------------------------

How can I check what locks have my phone closed?

There is 2 methods:
Use winlock to see the state of the locks, pressing Read Info.The Counter is the number of times that you have tried unlock your phone using an incorrect master code.
You can check it entering an imaginary mastercode on your phone but, it s not recommended because if you try enter a code 5 times your phone will not work anymore. By example, if you press at your phone #pw+1234567890+2# (note that # , p , w and + characters must be selected from * key) and your phone give you Code Error then your phone have lock 2 closed, if you get the message SIM Restriction Off your phone have lock 2 opened.
Look the table above to see how can check all locks:

Lock number Description Sequence to Check
1 Provider Lock #pw+1234567890+1#
2 Network-Lock #pw+1234567890+2#
3 Another Provider Lock #pw+1234567890+3#
4 SIM Card Lock #pw+1234567890+4#
---------------------------------------------------------
Unlock SP-Lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code. With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:

First of all, PIN CODE MUST BE ON, then press:

C

C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04***your pin>#

Each time you turn your phone OFF it resets the lock, so this need to be done each time you ll turn your phone ON

The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.

NOTE: On vesion 5.04 Nokia has removed this option !

update:
There s another Nokia service provider lock generator for DOS (somehere on the net) called 5161un.zip (for Nokia 51xx-61xx models) This program uses the #pw+(master code)+1# code to unlock the phone. With this software you need to have a access to the eeprom.. Sad
---------------------------------------------------------

Bypass the SP-lock

With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIM locked to one privider you can bypass the SP lock like this:

Insert sim card of diferent provider.

Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE ?

Press the "C" key.

Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.

update:
On version 5.04 Nokia has removed this option !
---------------------------------------------------------

How to open lock 1 and 4?
You will need Winlock software and MBUS cable to do this. Winlock is a Nokia service program that you can use to open lock 1 and 4, really you are closing locks when you do that, but when you write ????? at MCC+MNC and MSIN text box, the phone don t understand it and consider that it s open.

That trick only works for lock 1 and 4, but not for lock 2 and 3. If you did not know your lock type, please read our miscellaneous tips page first. or read at above section in this page.

Install winlock 1.10
Connect your MBUS nokia data cable
Run Winlock
Push Read Phone, if you have Lock 2 or Lock 3 closed you can not open your phone, but you can try change Lock 2.
Select State Close in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ??????? and Push Close Locks.
Now you can use any operator card in your phone. If you get any error when you do that do the following steps:
Select State Automatic in Lock 1 and Lock 4 and change type to User in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ?????????? and Push Close Locks.
Select State Automatic in Lock 1 and Lock 4 and change type to Factory in Lock 1 and Lock 4, fill out MCC+MNC and MSIN text boxes with ?????????? and Push Close Locks.
If you continue getting errors you must turn off your phone and reset computer and try again.
---------------------------------------------------------

How to open lock 2?

When operators companies close lock2 you can only use the contract or prepaid card for this operator, but you can use another operator company prepaid card if you know what GID1 must write.

Install Winlock
Run Winlock
Configure Winlock. Select menu Winlock->Defaults and change GID byte count to 2.
Push Read Phone, and write down GID1 info that appear in lock 2.
Insert the prepaid card from a different operator company.
We must find out a the GID1 info adecuate for our new prepaid or contract card, take a look at our GID1 list and check if your operator and SIM card type is included, if not try to get a phone that have lock 2 closed and have the SIM card type that you want to use in your phone, and read GID1 info with winlock. You can try to write the most used GID1 codes like 0000,10FF,01FF, or FFFF, etc.
Change Lock 2 Type from User To Factory or from Factory to User.
Push Close Locks
Your phone will be reset every time you push Close Locks, if your card is not acepted the GID1 is not correct, repeat from step 4 until you find the correct GID1.
If you get error you must turn off your phone and reset computer and try again.
If you want your phone accept your original prepaid card write in GID1 the code you read at step 2 and close locks.
Exist a GID1 list?

In addition to the official way to open locks that Nokia service centers use with TDB4 or TDF-4(for WinTesla) security boxes, there is two secrets methods:

Opening the phone and adding a chip inside phone motherboard. But you will loose any warranty of your phone.
Using a special software with a MBUS Nokia cable. I don t have this software. Please don t bother me asking me about that. The only thing i know about that is that a friend is removing lock 2 using a special software. He don t make this for money, only for fun.
--------------------------------------------------------

Main Code #pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).

Use the * key to get the p, + and w chars.
Y has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status

(master code) is a 10 digit code, based on the phones IMEI number.

update:
I get report that told me the code didn t works for Optimus Card
---------------------------------------------------------
Enhanced Full Rate Codec (EFR)
Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more)

*3370# and EFR will be activated after a reboot of the phone ( consumes more power )

#3370#
and EFR will be switched off after a reboot of the phone.
---------------------------------------------------------

Half Rate Codec (HR)
Half Rate will give you bad sound quality, which gives the service provider the opportunity to have more calls on the network; and you might get a lower charge from them. (Will give you 30% longer talk-time)
*4720# Half Rate coded will be activated after a reboot of the phone ( better standby time )

#4720# Half Rate coded will be de-activated after a reboot of the phone
---------------------------------------------------------

Unblocking Code
Unblock PIN1 : **05*PUK*newPIN1*newPIN1#@
UnBlock PIN2 : **052*PUK2*newPIN2*newPIN2#@
---------------------------------------------------------

Hiding your phone number
Dial 141 then the number you want to call eg. 141#######
This should stop your number been sent to the caller. (*)
(*) This only works on UK phones, if anybody has tried this and works, please let me know.
---------------------------------------------------------

Unlocking PIN2 for software version
V 05.07
20.11.98
NSE-1

If your SimCard is locked by your SP, you can check it and if it is, you will get the "wrong code" message on the display (for use 1234567890)
If your SimCard is locked by your SP, you can t unlock PIN2 !
---------------------------------------------------------

Blocking phone number at Cantel AT&T

If you have one of those cantel at&t phones if you press #0000# you can block your number
at no extra charge.
---------------------------------------------------------

New Menu on Emergency Calls *3001#12345#

Brings a new menu that gives you access to the emergency calls ( 911 Etc. ). It will give you FREE calls! (only the ones you put in the emergency!! )

This option will depend on your GSM operator
---------------------------------------------------------

Your number in your display
Goto menu 3-7 Call cost settings.
Turn ON the Call costs limit 3-7-1. PIN2 code Required.
Put in the limit with the phone number.
eg. my phone # is 019 2184697
Enter the limit as 2184697
Goto menu 3-7-2 Show costs in. PIN2 code Required.
Select Currency.
Enter Unit price : 1
Enter Currency name as 019 (per my phone # eg. above)
Now the phone number 019 2184697 will remains on the 4th row of the display.
Secondly, if you press the # key, it prompt which line to be used; Line 1 or 2.
---------------------------------------------------------
Free Call Tip

The tips needs Net Monitor enabled. Be aware that the trick will remove Netmonitor in some sw versions like v4.73 and v5.04.
Launch the Net Monitor in your Nokia 51xx / 61xx
Execute the test number 497
Free calling for about 90 sec should now have been activated.
---------------------------------------------------------

Nokia 5110 PIN-Out

Pin-Outs: Bottom view, keyboard up, counting from the left

V V 1 2 3 4 5 6 V
(o) | | [= = = = = =] | |
7 8 9 10 11 12

1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND

Nokia 61xx
__________

Firmware version
*#0000# or *#61x0#
IMEI Code
* # 06 #
Warranty Codes
*#92702689# (= *#war0anty#)

Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:

6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer

Enhanced Full Rate (EFR) and Half Rate Mode (HFR)

*3370# to activate Enhanced Full Rate - Makes calls sound better, but
decreases the battery life by about 5%.(I recommend this one)
#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call quality, but increases battery
life by about 30%.
#4720# to deactivate Half Rate Mode

Nokia 81xx
_____________

Show IMEI code
* # 06 #
Software Version
* # 8110 #
This code shows you software version, date of manufacture and hardware number of your phone.

Warranty Codes
*#92702689# (= *#war0anty#)

Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:

6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer

Sim Clock information

To check if the Sim-Clock can be stopped type: *#746025625# (= *#sim0clock#)

Nokia 8810
____________
Firmware version
*#0000# or *#8810#
IMEI Code
* # 06 #
Warranty Codes
*#92702689# (= *#war0anty#)

Just scroll down through the information. If entering the above code requires a
further warranty code try entering the following:

6232 (OK) : Month and year of manufacture
7332 (OK) : Last repair date
7832 (OK) : Purchase date (if previously set)
9268 (OK) : Serial number
37832 (OK) : Set purchase date (this can only be done once)
87267 (OK) : Confirm transfer

Enhanced Full Rate (EFR) and Half Rate Mode (HFR)

*3370# to activate Enhanced Full Rate - Makes calls sound better, but
decreases the battery life by about 5%.(I recommend this one)
#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call quality, but increases battery
life by about 30%.
#4720# to deactivate Half Rate Mode

Motorola Secret Codes

Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.
Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] [] [] 1 0 7 [] 1 []
Copy SIM memory (phonebook menu):
[] [] [] 1 0 8 [] 1 []
Eng Field options (main menu):
[] [] [] 1 1 3 [] 1 []
Slow (Frequency of search menu):
[] [] [] 1 0 1 [] 1 []
Medium (Frequency of search menu):
[] [] [] 1 0 2 [] 1 []
Fast (Frequency of search menu):
[] [] [] 1 0 3 [] 1 []
Enable EFR:
[] [] [] 1 1 9 [] 1 []
Function :
[] [] [] # # # [] 1 []
Change pin:
[] [] [] 0 0 4 [] 1 []
Unblocking using the "puk" number:
[] [] [] 0 0 5 [] 1 []
There are lots of similar codes exist. If you change the last number to 0 you can deactive that code. The 3 digit number at the middle are from 0 to 999. I put the most interesting codes. (EFR):Enhanced Full Rate Codec.
You can change GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:
enter menu and press 048263* quickly, then you will enter the secret engineering menu
under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900
To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.

Nokia All Codes-Part3

Scroll Down to view Specific Model Numbers!!!!

*** WARNING: Using secret codes may be harmful to your phone and result in disabling or worse. Use these codes at your own discretion, we accept no responsiblility for blocked pones while using these codes!!!
IMEI Number
*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code of the approval-country )
FAC = Final Assembly Code: (01,02 = AEG)
(10,20 Nokia)
(40,41,44 Siemens)
(30 Ericsson)
(50 Bosch)
(51 Sony,Siemens,Ericsson)
(60 Alcatel)
(65 AEG)
(70 Sagem)
(75 Dancall)
(80 Philips)
(85 Panasonic)
SNR = Serial Nr.
SP = Spare (always "0")

Software Version
*#0000# shows the software version
Signal Processing
*3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart.
#3370# - Enchanced full Rate Codec (EFR) deactivation
*4720# - Half Rate Codec activation. It will automatically restart.
#4720# - Half Rate Codec deactivation
Enchanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Sim Clock Stopping
*#746025625#
[*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.
It will tell you if it can be stopped or not.

Warrenty Menu
*#92702689# takes you to a secret menu with 6 choices:
[*#war0anty#]
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997).
3. Displays (if there) the date where the phone was purchased (MMYY).
4. Displays the date of the last repairment - if found (0000).
5. Makes you capable of transferring user data if you have the gear for it.
6. Shows how long the phone has been used to talk. This counter is not reset by when you "clear timers" like the counters in the call register.

Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx
1. Insert SIM card of different provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec.
Then release it and the phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN#

Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^)
The settings for radar speed traps detector. Your Nokia cell phone can be programmed to pick up radar speed traps, when programmed your cell phone picks up the radar and alerts you on the message alert tone. ( Doesn't work with Nokia 7110! )
1. Enter your menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8. Clear back to normal, within a few seconds your phone will display a radar sign with five zero's next to it. It is now activated.
Unfortunately only Nokia phones have this function. The Cell Phone info display needs to be de-activated. Settings -> Phone Settings -> Cell Info display. Each time you turn off your phone, or even each time you loose contact with your carrier, you'll have to activate it again... It is done using steps 1 through 5 above, but the number (00000) will be already on the field as a default.

The James Bond Trick

If you short-circuit the left middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying! Network Monitor
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.
Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
Take apart the phone.
De-solder the EEPROM (ATMEL AT 24C64)
Read out the data with an EEPROM programmer and save it to a file (Backup)
If you have v.33 or v4.73, change the address "03B8" from "00" to "FF"
If you have v5.24 then change the address "0378" from "00" to "FF"
Write the new data to the EEPROM and solder it back to the phone
Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information:
Carrier number, MS RX Level in DBM, Received signal quality, MS TX power level, C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99, RTL (Radio link timeout), Timeslot, Indication of the transmitter status, Information on the Network parameters, TMSI (Temporary Mobile Subscriber Identity), Cell identification (Cell ID, Number of cells being used), MCC (Mobile country code), MCN (Mobile network code), LAC (Location area code), Ciphering (On/Off), Hopping (On/Off), DTX (On/Off), Discard cell barred information.

Game Hacking with Blizzard

Get the file called the 'BlizzardN-GAGE.SIS' from IRC get in #mediaplace on Efnet (note: Downloading cracked/Hacked games is illegal unless you already own a copy of game)
The Blizzard Nokia N-Gage Installer.
1. Unpack Blizzard.sis file that you get from mIRC
2. Transfer the .sis file to your N-Gage
3. Get the .blz (N-gage ROM) from mIRC
4. copy the file to the root dir of your MMC (16MB MMC)Multimedia Card
5. Use the Blizzard application to unpack the .blz file
6. After unpacking the sonic icon should appeared in the MENU
7. Clicked sonic icon and it should work !

List of compatible games for the 3650,6600 and the N-gage that work:
[3650]
SonicN (v.2.5+)
Puyo Pop (v.2.5+)
[6600]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
[N-Gage]
SonicN
Puyo Pop
Pandemonium
Tomb Raider
Super Monkey Ball
Tony Hawks Pro Skater
GSM Network Services Command Strings
When various network functions are selected via the cellphone's menu using the keypad, the cellphone automatically generates the corresponding GSM network command string and transmits it to the network. These commands can however be manually entered via the keypad.

Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
© Call button

Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678).
Command Description Command String
Security
Change call barring code **03*OldCode*NewCode*NewCode#©
Change call barring code **03*330*OldCode*NewCode*NewCode#©
Change PIN code **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to number and activate **004*number#©
De-register all configured call diversions (no answer, not reachable, busy) ##004#©
Unconditionally divert all calls to number and activate **21*number#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Deactivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to number and activate **61*number#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Deactivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not reachable to number and activate **62*number#©
Activate divert on not reachable *62#©
De-register divert on not reachable ##62#©
Deactivate divert on not reachable #62#©
Check status of divert on not reachable *#62#©
Divert on busy to number and activate /td> **67*number#©<
Activate divert on busy *67#©
De-register divert on busy ##67#©
Deactivate divert on busy #67#©
Check status of divert on busy *#67#©
Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below)
Call barring
Activate barr all outgoing calls (see Security to set code) **33*code#©
Deactivate barr all outgoing calls #33*code#©
Check status of barr all outgoing calls *#33#©
Activate barr all calls **330*code#©
Deactivate barr all calls #330*code#©
Check status of barr all calls /td> *#330*code#©<
Activate barr all outgoing international calls **331*code#©
Deactivate barr all outgoing international calls #331*code#©
Check status of barr all outgoing international calls *#331#©
Activate barr all outgoing international calls except to home country **332*code#©
Deactivate barr all outgoing international calls except to home country #332*code#©
Check status of barr all outgoing international calls except to home country *#332#©
Activate barr all outgoing calls **333*code#©
Deactivate barr all outgoing calls #333*code#©
Check status of barr all outgoing calls *#333#©
Activate barr all incoming calls **35*code#©
Deactivate barr all incoming calls #35*code#©
Check status of barr all incoming calls *#35#©
Activate barr all incoming calls when roaming **351*code#©
Deactivate barr all incoming calls when roaming #351*code#©
Check status of barr all incoming calls when roaming *#351#©
Activate barr all incoming calls **353*code#©
Deactivate barr all incoming calls #353*code#©
Check status of barr all incoming calls *#353#©
Call waiting
Activate call waiting *43*#©
Deactivate call waiting #43##©
Check status of call waiting *#43#©
Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#©
Deactivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one's own number to the to the called party
Activate CLIR **31#©
Activate CLIR for the actual call *31#number©
Deactivate CLIR ##31#©
Deactivate CLIR for the actual call #31#number©
Check status of CLIR *#31#©
COLP: Presentation of the actual number reached (if number called was diverted to another number
Activate COLP *76#©
Deactivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone)
Activate COLR *77#©
Deactivate COLR #77#©
Check status of COLR *#77#©

Cellphone Services
10 All types of cellphone services
11 Speech service
12 Data service
13 Fax
14 Datex-J
15 Teletex
16 Short message service (SMS)
18 All data services without SMS
19 All cellphone services without SMS

Carrier Services
20 All services
21 All asynchronous services
22 All synchronous services
23 3.1kHz services
24 Synchronous point-to-point connections including PAD's (all synchronous data services)
25 Asynchronous point-to-point connections including PAD's (all asynchronous data services)
26 Data packet sending including PAD's (all synchronous data packet services)
27 Services with PAD-share
29 Digital connection with 12kbps

GSM Network Service Codes
Note that at present only the following service codes are in use:
11 Speech
13 fax
25 data

Cell Broadcast
While Short Message Service (SMS) can be configured as a personal service, Cell Broadcast is a general service which is designed for subscribers of a specific cell or topic. For example, a subscriber to cell 050 in England will receive information on the GSM tower currently being used by their phone. This new concept brings a whole new meaning to the term mobile communications as the phone is now able to receive information such as share prices or weather updates without the need of data cards and computers. At present the following message types exist (note: this may vary from carrier to carrier and some carriers may charge for this service):

Code Title
000 Index
010 Flashes
020 Hospitals
022 Doctors
024 Pharmacy
030 Long Distant Road Reports
032 Local Road Reports
034 Taxis
040 Weather
050 District
052 Network Information
054 Operator Services
056 Directory Inquiries (national)
057 Directory Inquiries (international)
058 Customer Care (national)
059 Customer Care (international)

In the future one will be able to control each individual call by use of the following service codes. To do this the user has to insert the service code in front of the last # in the MMI command above.

Or More

Secret Codes for some Nokia models
Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Nokia 9110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version: v5.02 (26-08-99)RAE-2

Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: 4.77 25-01-00 NSE-5 - EFR and half rate codes do not work with these version.

V 4.76 13-01-00 NSE-5
V 4.75 07-01-00 NSE-5
V 4.73 15.11.99 NSE-5

Nokia 6190

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#6190# shows the SW version.
*#92772689# (after removing the analog module) shows service menu.
*3001#12345[OK] to enter test mode.
*#639# to change NAM.

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689# for checking ISDN number.
*3001#12345# for field test mode and nam selection and some other stuff...
*#9999# shows the SW version

Nokia 3210 Secret Codes
Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: V 5.02 NSE-8/9

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (Algebraic Code Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced by about 5% when using the ERF option.

Samsung D series hack

Tips and Tricks for the D820, D900, and other Samsung phones with similar firmware.

#*22671* - Starts the phone recording in the background. It can record up to an hour, secretly. Press #*22672*

Holding the volume button when the screen is off displays a short summary of information. Time, Date, signal, missed calls, etc...

Enter code *#1234# to display Firmware version of the phone
Example : D900XAFG6
D900 = model
XA = Region / Country
F = Year (2006)
G = Month (July)
6 = Firmware Release in month (so this is the 6th revision)

Hold down # to mute, or unmute the phone.

Press 1 while watching a video to make it full screen.

While playing a song in music player u can highlight a part of the song to be repeated over, while listening to the song press 7 at the point u want repeated then press 7 again at the end of the section and it will loop the section between the the two presses of 7

If you need to send a photo via mms and its too big to send and u have no pc available to downsize the pic (my limit is 100kb via mms with my sim) open the photo in photo editor on the phone and "save as" rename it differently from the original and u will have two copys of the pic and the edited version will be under 100kb.

Hidden Menu: *#8999*8378#

Make MP3 sound louder:
1. hit: *#8999*8378#
2. hit: 2, and then 2 again.
3. then on IIS NORMAL (or hit 9)
4. then on "Rx vol."
5. for level 10, click 0
then save

Orignals are:
level 10 = 10
level 9 = 18

Make sound setting louder when som1s calling:
1. *#8999*8378#
2. 2 times 2
3. 1 (NORMAL)
4. then on "Rx vol."
5. level 5 type 140 instead of 120

Samsung Mobile Service Center CODES

*#06# -> Show IMEI

*#9999# -> Show Software Version

*#0837# -> Show Software Version (instructions)

*#0001# -> Show Serial Parameters

*#9125# -> Activates the smiley when charging.
*#9998*228# -> Battery status (capacity, voltage, temperature)

*#9998*246# -> Program status

*#9998*289# -> Change Alarm Buzzer Frequenc
y
*#9998*324# -> Debug screens

*#9998*364# -> Watchdog

*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.

*#9998*427# -> Trace Watchdog

*#9998*523# -> Change LCD contrast - Only with version G60RL01W

*#9998*544# -> Jig detect

*#9998*636# -> Memory status

*#9998*746# -> SIM File Size

*#9998*778# -> SIM Service Table

*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN

*#9998*837# -> Software Version

*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.

*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected

*#9998*872# -> Diag

*#9998*947# -> Reset On Fatal Error

*#9998*999# -> Last/Chk
*#9998*9266# -> Yann debug screen (=Debug Screens?)

*#9998*9999# -> Software version
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100
*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES the Security Lock and formats The Mobile's Chipset )

But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

*2767*2878# -> Custom EEEPROM Reset ( does not change the securitu CODE )

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

Samsung Research Center Codes

You can try these in case you downloaded corrupted or incompatible Java midlets or other media, which are causing problems with the phone.
*2767*JAVA# Java Reset and (Deletes all Java Midlets)
*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
*2767*WAP# Wap Reset
*2767*CUST# Reset Custom EEPR0M
*2767*FULL# Reset Full EEPR0M (Caution)
For example : *2767*JAVA# would be keyed in as *2767*5282#
Note : Not all codes will work with SGH-C100.

Other Samsung Codes
*#06# IMEI code
*#9998*4357# Help Menu
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
*#9999#0# Monitor Mode
*#9999# or *#9998*9999# Software Version
*#8888# or *#9998*8888# Hardware Version
*#9998*746# or *#9998*0746# or *#0746# Sim Infos
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)
*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*377# or *#9998*0377# Error log
*#9998*778# or *#9998*0778# or *#0778# Sim Service table
*#9998*782# show date and alarm clock
*#8999*638# show network information
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm
*#9998*585# Non-Volatile Memory (NVM)
*#3243948# Digital Audio Interference Off
*#32436837# Digital Audio Interference On

SAMSUNG T100 SECRET CODES
============================
*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but also change IMEI to 447967-89-400044-0, you must use CHGIMEI to restore it)

*2767*2878# -> Custom EEEPROM Reset
*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version

SAMSUNG V200 SECRET CODES

v200 Unlock Code-> *2767*7822573738#
*#9324# Netmon (press the hangup key to exit)
*#9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
*#9998*Help# Help screen/ List of codes
*#9998*LOGO# Change operator Logo
*#9998*RTC# RTC Display
*#9998*Bat# Battery Status
*#9998*Buz# Turns Buzzer ON
*#9998*Vib# Turns Vibrator ON
*#9998*LCD# LCD Contrast
*#9998*9999# Softwre Version
*#9998*8888# Hardware Version
*#9998*377# NVM Error Log (?????)
*#9998*NET# SIM Network ID
*#9998*778# SIM Serv. Table
*#9998*SIM# SIM Info
*#9998*PN# Production No.
*#9998*968# Reminder Tune
*#9998*NVM# Displays Non-Volitile Memory Status
*#9999*C# ???????????????????
*#06# Displays phones I**I No.
***/// ***/// NOTE /// *** RED COLOR , they appear serious !!! Use at
own risk !!!
*#9998*2576# Forces SIM Error
*#9998*DEAD# Forces Phone Crash
*2767*MEDIA# Resets the medis on the phone (deletes all downloaded
pics/tones)
*2767*FULL# Resets the EEPRON *DANGEROUS*
*2767*CUST# Resets the Custom EEPRON
*2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
*2767*STACKRESET# Resets Stack
*2767*225RESET# ????????????????? * Dangerous *
*2767*WAP# Resets WAP Setting & Deletes Favorites

SAMSUNG A800 SECRET CODES

The universal unlock code is *2767*637# do this with out your sim in
By default, the firmware (software) for x600 only receives java
apps and other applications like stuff by serial port.
but even for it, you have to enable the serial port, which also
causes
the closing of all other ports, even the IrDA too :-( ..
well, guess what, i have very good news for you,
do you know, you can increase the sound level,
the sound level for tones, speaker fone, etc,
can be increase even then if it is at max (level 4)
you still can do it,
just follows the instructions!

**************** HERE WE GO **************
Enter the following code:
*#8999*8378#
(You'll be shown menu, then ...)
then go to:
"H/W test"
then go to:
"Audio Settings"

then go to:
"Melody Gain"

There will you see a number.
there are five (5) Melody Levels" of it.
(and currently, you are at level 1 and after
pressing the "save" button, you will move to
level 2 and so on .........................)
you have to change the values of all the levels.
and as the resultant, it will give increase the
melody sound!, your tones will more louder,
even more louder then the max. ringing volume.
the level wise numbers are: (as its my setting :-) )

Melody Level 1: 13
Melody Level 2: 17
Melody Level 3: 18
Melody Level 4: 25
Melody Level 5: 31
you even can make your own combinations of level wise
sounding numbers that can change the sound level!.

if your combination cause more louder sound level,
then mine,
then do share it with the group! ... :-)
meanwhile, try my figured-out combination!

************ CAUTION ************
if anything goes wrong,
then you can apply the master reset code,
that will NOT delete anything, ANYTHING from your
cell fone, but set each and eveything to its
default/standard setting ...
(likes, factory settings :-) )
the master reset code is:
#*7728#

#########################################
I take no responsibility of these codes are working or not,
or its effects on your cell fone
but i have tried these codes on my cell fone.
and i bet, nothing goes wrong,
but even then of my words, be carefull!,
#########################################
The code: *#8999*8378#
as i regarded it a informative code,
will tell you each and everything about your cell fone.
and in the "H/W test",
there are lot of other Audio settings,
each of them having five (5) levels,
you can change the combination, but before doing anything,
do write the defult number sequence to some place so that
you'll be then able to invert it again! .. :-) ...
#*2558# - Time ON
#*2527# - GPRS Switching Set to class {4/8/9/10}
#*4263# - Handsfree Mode: ACTIVATED
#*53696# - [Java dnload] WAPSAR mode
#*536961# - WAPSAR enable HTTP disable
#*536962# - HTTP enable WAPSAR disable
#*536963# - SERIAL enable Others disable
#*5663351# - [Phone Model] SAMSUNG SGH-X100
#*6420# - Mic off
#*6421# - Mic on
#*7632# - Sleep mode
*#8999*523# - Main LCD Brightness
*#8999*3825523# - (?) External display
*2767*3855# - Full EEPROM reset(Reset all type of locks)also you'll
lose pictures and java not melody
Remove camera sound:
On main screen type:
*#8999*8378# --> Test mode
H/W test
Audio Settings
Melody Gain
Then replace 6 by 0, it'll show 12 but it's OK
Press back until main screen
Then press key volume to minimum and let's try !!! no more sound
tip by C-Quest

*2767*688# resets the phone
Thats all!!!!!!!!!!!!!!!
Samsung X100 Tricks

#*0000#
#*0400#
#*1200# - AFC DAC Val
#*1300# - IMEI
#*1400# - IMSI
#*1700# - ( ) Command #*1700 Executed
#*1800# - ( ) Command #*1800 Executed
#*1900# - ( ) Command #*1900 Executed
#*2000# - ( ) Command #*2000 Executed
#*2100# - ( ) Command #*2100 Executed
#*2200# - ( ) Command #*2200 Executed
#*2252# - Current CAL
#*2255# -
#*2256# - Calibr.-Info
#*2282#
#*2285#
#*2286# - Databattery
#*2337# - ( ) Permanent Registration - Not Yet Implemented
#*2355#
#*2400# - ( ) Command #*2400 Executed
#*2474# - For CMD Set - DEBUGBATTERY in cihard.opt
#*2527# - GPRS Switching Set to class {4/8/9/10}
#*2558# - Time ON
#*2562#
#*2565#
#*2677# - AMR State: {None / Full Rate}
#*2679# - Copycat Feature: {ACTIVATED/DEACTIVATED}
#*2787# - CRTP {ON/OFF}
#*2834# - Audio path Mobile Normal
#*2836# - AVDDSS Management: {DEACTIVATED/ACTIVATED}
#*3230# - Trace Enable DCD disable
#*3231# - Trace disable DCD Enable
#*3232# - Current Mode {Trace enabled/DCD enabled}
#*3270# - DCS Support: {DEACTIVATED/ACTIVATED}
#*3282# - Data: {DEACTIVATED/ACTIVATED}
#*3333#
#*3353# - General Defence Code Erased
#*3370#
#*3377#
#*3476# - EGSM: {DEACTIVATED/ACTIVATED}
#*3676# - Flash Volume Formated
#*3683#
#*3737# - Some Codes
#*3777#
#*3779#
#*3825# - ( ) Command #*3825 Executed
#*3837#
#*3849#
#*3851#
#*3876#
#*3877# - Dump of SPY Trace
#*3900#
#*3940# - External looptest 9600 bps not available in SYSOL2
#*3940# - External looptest 115200 bps not available in SYSOL2
#*3941#
#*4200#
#*4263# - Handsfree Mode: ACTIVATED
#*4300#
#*4500#
#*4674# - IMSI| MCC:2 5 0 | MNC 9 2 | 10 11 91 83 50
#*4700# - Half Rate: {ACTIVATED/DEACTIVATED}
#*4760# - GSM: {ACTIVATED/DEACTIVATED}
#*4864#
#*5100#
#*5111# - ( ) Some Codes
#*5132#
#*5133# - ( ) Some Codes
#*5143#
#*5156#
#*5165#
#*5171# - ( ) Some Codes
#*5172# - ( ) Some Codes
#*5173# - ( ) Some Codes
#*5174#
#*5175#
#*5176# - ( ) Some Codes
#*5177#
#*5187# - L1C2G trace: {ACTIVATED/DEACTIVATED}
#*53696# - [Java dnload] WAPSAR mode
#*536961# - WAPSAR enable HTTP disable
#*536962# - HTTP enable WAPSAR disable
#*536963# - SERIAL enable Others disable
#*5376#
#*5400# - ( ) Command #*5400 Executed
#*5500#
#*5600#
#*566335# - [WAP model ID]
#*5663351# - [Phone Model] SAMSUNG SGH-X100
#*5663352# - [Java Model] SEC-SGHS300/1.0
#*5737425# - Java Serial
#*577699# - APN
#*5800# - ( ) Command #*5800 Executed
#*6100# - ( ) Command #*6100 Executed
#*6200#
#*6420# - Mic off
#*6421# - Mic on
#*6422# - Mic dep RXdata
#*6428# - Mic measurement
#*6700#
#*6837# - Official Software Version
#*6900#
#*7200#
#*7222# - Operation Typ: Class C GSM
#*7224# - ERROR
#*7247#
#*7252# - Operation Typ: Class B GPRS
#*7271# - Multi slot: Class 1 GPRS
#*7274# - Multi slot: Class 4 GPRS
#*7276#
#*7284# - Class B
#*7287# - GPRS Attached
#*7288# - GPRS Detached
#*7326# - Accessory: Vibrator
#*7337# - Some kind of Reset Settings
#*7352# - Some Kind of Debug Info
#*7462# - SIM phase
#*7524# - KCGPRS
#*7562# - LOCI GPRS
#*7636#
#*7639#
#*7632# - Sleep mode
#*7633#
#*7638# - RLC always open ended TBF: {ACTIVATED/DEACTIVATED}
#*7646#
#*7665#
#*7666# - SrCell Data
#*7673# - Sleep mode
#*7676# - Command #*7676 Executed
#*7683# - Sleep variable
#*7693# - Sleep deact
#*7728# - RSAV done->reset
#*7763# - SMS bearer CS {ACTIVATED/DEACTIVATED}
#*7825#
#*7828# - Midl Rl51
#*7957# - Command #*7957 Executed
#*7983# - Voltage/Freq {DEACTIVATED/ACTIVATED}
#*7986# - Voltage {DEACTIVATED/ACTIVATED}
#*8462# - Sleep time since SwitchOff
#*8465# - Time in L1
#*8466# - Old Time
#*8645#
#*9278# - Command #*9278 Executed
#*9795# - wtls key: reset
#7263867# - RAM Dump {On/Off}
#7465625*228# - Activa lock deactivated
#7465625*27*
#7465625*2827# - Auto CP lock deactivated
#7465625*28638# - Auto Network lock deactivated
#7465625*28746# - Auto SIM lock deactivated
#7465625*2877# - Auto SP lock deactivated
#7465625*28782# - Auto subset lock deactivated
#7465625*638*
#7465625*746*
#7465625*77*
#7465625*782*
#8999*324#
*#0*
*#0020# –
*#06# – IMEI
*#2255# - Call List
*#4777*8665# – GPRS
*#7465625# – Interrogate ( )
*#8377466# – Software && Hardware Versions
*#8888# – Hardware Version
*#8999*324# - ( ) Some Strange Numbers
*#8999*377# -
*#8999*3825523# - ( )
*#8999*523# - Main LCD Brightness
*#8999*636# - ( ) Another Strange Numbers
*#8999*8376363# - . HW, SW, + Some Code And Data
*#8999*8378# - . , , , HW SW
*#9999# – Software Version

=== : ===

*2767*xx927 - WAP . xx - . , xx=44: *2767*44WAP# xx=31: *2767*31WAP#

*2767*xx667 - MMS.

.

*2767*2877368#
*2767*2878# – EEPROM ( , )
*2767*31667#
*2767*31927#
*2767*33667#
*2767*33927#
*2767*34667#
*2767*34927#
*2767*351667#
*2767*351927#
*2767*3700#
*2767*380667#
*2767*380927#
*2767*3855# - l EEPROM ( SP- !! ) IMEI 447967-89-400044-0, IMEI ( )
*2767*39667#
*2767*39927#
*2767*420667#
*2767*420927#
*2767*43667#
*2767*43927#
*2767*44667#
*2767*44927#
*2767*46667#
*2767*46927#
*2767*49667#
*2767*49927#
*2767*66335#
*2767*688# ( ) [Unlocking Code]
*2767*7100#
*2767*7300#
*2767*73738927# = *2767*RESETWAP#
*2767*7650#
*2767*7667#
*2767*7927#
*2767*8200#
*2767*927#

=== / : ===

*335#
*663867# - mm file dumped
*7465625# -
*7465625*228# - Activa lock personalized
*7465625*27*
*7465625*2827# - Auto CP lock activated
*7465625*28638# - Auto Network lock activated
*7465625*28746# - Auto SIM lock activated
*7465625*2877# - Auto SP lock activated
*7465625*28782# - Auto subset lock activated
*7465625*638*
*7465625*746
*7465625*746*
*7465625*77*
*7465625*782*

Secret Codes

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast - Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.
*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)
*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

*2767*2878# -> Custom EEEPROM Reset

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

SAMSUNG SECRET CODES (NEW)

Latest

*#1111# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together

*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error Menu
*#8999*327# EEP Menu
*#8999*3825523# Don't Know.
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Adress
*#5282837# Java Version

#*4773# Incremental Redundancy
#*7752# 8 PSK uplink capability bit
#*7785# Reset wakeup & RTK timer cariables/variables
#*1200# ????
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*#8999*324# ??
#*7828# Task screen
#*5111# ??
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen
#*3849# Restarts Phone
#*3851# Restarts Phone
#*3876# Restarts Phone
#*7222# Operation Typ: (Class C GSM)
#*7224# !!! ERROR !!!
#*7252# Operation Typ: (Class B GPRS)
#*7271# CMD: (Not Available)
#*7274# CMD: (Not Available)
#*7337# Restarts Phone (Resets Wap Settings)
#*2787# CRTP ON/OFF
#*2886# AutoAnswer ON/OFF
#*3737# L1 AFC
#*5133# L1 HO Data
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*7284# L1 HO Data
#*2256# Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# Databattery
#*2527# GPRS switching set to (Class 4, 8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode Activate/Deactivate
#*4700# Please use function 2637
#*7352# BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# Time ON
#*3370# Same as 4700
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5187# L1C2G trace Activate/Deactivate
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version: (0003000016000702)
#*7524# KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*5171# L1P1
#*5172# L1P2
#*5173# L1P3
#*7326# Accessory
#*7683# Sleep variable
#*8465# Time in L1
#*2252# Current CAL
#*2836# AVDDSS Management Activate/Deactivate
#*3877# Dump of SPY trace
#*7728# RSAV
#*2677# Same as 4700
#*3797# Blinks 3D030300 in RED
#*3728# Time 2 Decod
#*3725# B4 last off
#*7372# Resetting the time to DPB variables
#*7732# Packet flow context bit Activate/Deactivate
#*6833# New uplink establishment Activate/Deactivate
#*3273# EGPRS multislot (Class 4, 8, 9, 10)
#*7722# RLC bitmap compression Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*4472# Hysteresis of serving cell: 3 dB
#*2775# Switch to 2 inner speaker
#*9270# Force WBS
#*7878# FirstStartup (0=NO, 1=YES)
#*3757# DSL UART speed set to (LOW, HIGH)
#*8726# Switches USBACM to Normal
#*8724# Switches USBACM to Generator mode
#*8727# Switches USBACM to Slink mode
#*8725# Switches USBACM to Loop-back mode
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*2872# CNT
*#8999*283# ???
#*22679# AMR Get Time
*288666# ???
*2886633# ???
*#8999*364# Watchdog ON/OFF
#*8370# Tfs4.0 Test 0
#*8371# Tfs4.0 Test 1
#*8372# Tfs4.0 Test 2
#*8373# Tfs4.0 Test 3
#*8374# Tfs4.0 Test 4
#*8375# Tfs4.0 Test 5
#*8376# Tfs4.0 Test 6
#*8377# Tfs4.0 Test 7
#*8378# Tfs4.0 Test 8
#*8379# Tfs4.0 Test 9
#837837# error=...

#*36245# Turns Email TestMenu on.

*2767*22236245# Email EPP set (....)!
*2767*837836245# Email Test Account!
*2767*29536245# Email Test2 Account!
*2767*036245# Email EPP reset!
*2767*136245# Email EPP set (1)!
*2767*736245# Email EPP set (7)!
*2767*3036245# Email...
*2767*3136245# Email...
*2767*3336245# Email...
*2767*3436245# Email...
*2767*3936245# Email...
*2767*4136245# Email...
*2767*4336245# Email...
*2767*4436245# Email...
*2767*4536245# Email...
*2767*4636245# Email...
*2767*4936245# Email...
*2767*6036245# Email...
*2767*6136245# Email...
*2767*6236245# Email...
*2767*6336245# Email...
*2767*6536245# Email...
*2767*6636245# Email...
*2767*8636245# Email...
*2767*85236245# Email...

*2767*3855# = E2P Full Reset
*2767*2878# = E2P Custom Reset
*2767*927# = E2P Wap Reset
*2767*226372# = E2P Camera Reset
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings

*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

**********************

#*7878# FirstStartup (0=NO, 1=YES)
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*22679# AMR Get Time
*#8999*364# Watchdog ON/OFF
*#8999*427# WATCHDOG signal route setup
*2767*3855# = Full Reset (Caution every stored data will be deleted.)
*2767*2878# = Custom Reset
*2767*927# = Wap Reset
*2767*226372# = Camera Reset (deletes photos)
*2767*688# Reset Mobile TV
#7263867# = RAM Dump (On or Off)
Samsung Secret Codes Part 3
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings
*#7465625# = Check the phone lock status
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

Type *#9998*627837793# Go to the 'my parameters' and there you will find new menu where you can unlock phone.(not tested-for samsung C100)
To unlock a Samsung turn the phone off take the sim card and type the following code *#pw+15853649247w# .

Java status code: #*53696# (Samsung X600)

If you want to unlock your phone put a sim from another company then type *#9998*3323# it will reset your phone. Push exit and then push 7, it will reset again. Put your other sim in and it will say sim lock, type in 00000000 then it should be unlocked. Type in *0141# then the green call batton and it's unlocked to all networks. This code may not work on the older phones and some of the newer phones. If it doesn't work you will have to reset your phone without a sim in it by typing *#2767*2878# or *#9998*3855# (not tested)

*2767*688# = Unlocking Code
*#8999*8378# = All in one Code
*#4777*8665# = GPSR Tool
*#8999*523# = LCD Brightness
*#8999*3825523# = External Display
*#8999*377# = Errors
#*5737425# = JAVA Something{I choose 2 and it chrashed}][/b]
*#2255# = Call List

#*536961# = Java Status Code
#*536962# = Java Status Code
#*536963# = Java Status Code
#*53696# = Java Status Code

#*1200# = AFC DAC Val
#*1300# = IMEI
#*1400# = IMSI

#*2562# = ??? White for 15 secs than restarts.
#*2565# = Check Blocking
#*3353# = Check Code
#*3837# = ??? White for 15 secs than restarts.
#*3849# = ??? White for 15 secs than restarts.
#*3851# = ??? White for 15 secs than restarts.
#*3876# = ??? White for 15 secs than restarts.

#*7222# = Operation Typ (Class C GSM)
#*7224# = I Got !! ERROR !!
#*7252# = Oparation Typ (Class B GPRS)
#*7271# = Multi Slot (Class 1 GPRS)
#*7274# = Multi Slot (Class 4 GPRS)
#*7276# = Dunno
#*7337# = EEPROM Reset (Unlock and Resets WAP Settings)
#*2787# = CRTP ON/OFF
#*3737# = L1 Dbg data
#*5133# = L1 Dbg data
#*7288# = GPRS Attached
#*7287# = GPRS Detached
#*7666# = SrCell Data
#*7693# = Sleep Act/DeAct (Enable or Disable the Black screen after doing nothing for a while)
#*7284# = Class : B,C or GPRS
#*2256# = Calibration Info
#*2286# = Battery Data
#*2527# = GPRS Switching (set to: class 4, class 8, class 9 or class 10)
#*2679# = Copycat feature (Activate or Deactivate)
#*3940# = External loop test 9600 bps
#*4263# = Handsfree mode (Activate or Deactivate)
#*4700# = Half Rate (Activate or Deactivate)
#*7352# = BVMC Reg value
#*8462# = Sleeptime
#*2558# = Time ON
#*3370# = EFR (Activate or Deactivate)
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep
#*7462# = SIM phase
#*7983# = Voltage/Frequenci (Activate or Deactivate)
#*7986# = Voltage (Activate or Deactivate)
#*8466# = Old time
#*2255# = Call ???
#*5187# = L1C2G trace (Activate or Deactivate)
#*5376# = ??? White for 15 secs than restarts.
#*6837# = Official Software Version
#*7524# = KCGPRS
#*7562# = LOCI GPRS
#*7638# = RLC allways open ended TBF (Activate or Deactivate)
#*7632# = Sleep mode Debug
#*7673# = Sleep mode RESET
#*2337# = Permanent Registration Beep
#*2474# = ???
#*2834# = Audio Path
#*3270# = DCS support (Activate or Deactivate)
#*3282# = Data (Activate or Deactivate)
#*3476# = EGSM (Activate or Deactivate)
#*3676# = Flash volume formated
#*4760# = GSM (Activate or Deactivate)
#*4864# = Dunno doesn't work on newer versions
#*5171# = L1P1
#*5172# = L1P2
#*5173# = L1P3
#*7326# = Accessory (I got Vibrator)
#*7683# = Sleep variable (
#*7762# = SMS Brearer CS (Activate or Deactivate)
#*8465# = Time in L1
#*9795# = wtls key
#*2252# = Current CAL
#*2836# = AVDDSS Management (Activate or Deactivate)
#*3877# = Dump of SPY trace
#*7728# = RSAV done# (Everything went to standart but nothing was deleted)
#*2677# = ARM State (None or Full Rate)
*#8999*636# = Have no clue what it is, i see 20 lines
*#9999# = Software version
*#8999*8376263# = HW ver, SW ver and Build Date
*#8888# = HW version
*#8377466# = Same HW/SW version thing

*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock

#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

*2767*3855# = E2P Full Reset
*2767*2878# = E2P Custom Reset
*2767*927# = E2P WAP Reset
*2767*226372# = E2P Camera Reset
#*6420# = MIC Off
#*6421# = MIC On
#*6422# = MIC Data
#*6428# = MIC Measurement
#*3230# = Trace enable and DCD disable
#*3231# = Trace disable and DCD enable
#*3232# = Current Mode
#7263867# = RAM Dump (On or Off)
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings
*335# = Delete all MMS Messages
*663867# = Dump Mm file
#*536961# = WAPSAR enable / HTTP disable
#*536962# = WAPSAR disable / HTTP enable
#*536963# = Serial eable / Others disable
#*53696# = Java Download Mode
#*5663351# = WAP Model ID [Your Model]
#*5663352# = WAP Model ID [SEC-SGHXXXX/1.0]
#*566335# = WAP Model ID [SEC-SGHXXXX/1.0]
*2767*66335# = Check on which model it is
*2767*7100# = SEC-SGHS100/1.0
*2767*8200# = SEC-SGHV200/1.0
*2767*7300# = SEC-SGHS300/1.0
*2767*7650# = Nokia7650/1.0
*2767*2877368# = Reset WAP Model ID to standard.

Sony Ericsson Secret codes

Sony Ericsson Secret Menu: -> * <- <- * <- *
(-> means press joystick, arrow keys or jogdial to the right and <- means left.)
You'll see phone model, software info, IMEI, configuration info, sim lock status, REAL time clock, total call time and text labels.
You can also test your phones services and hardware from this menu (main display, camera, LED/illumination, Flash LED, keyboard, earphone, speaker, microphone, radio and vibrator tests)

IMEI Number: *#06#
Lockstatus: <- * * <-
Shortcut to last dialed numbers: 0#
Shortcut to sim numbers: On main menu type a number and press #

If you change the language from default to any other language, then it may be difficult to switch to default language. The shortcut is very simple. Just press < 0000 > . < stands for left arrow button or joystick and > stands for right arrow button or joystick.

Symbians S60 MOBILES

There is Nothing Remaining Now

Go ahead Explore ur N series : Shankha(Fainted brain)

All Compiled for You

This article is Dedicated to my awesome Friend Akshay ahuja For His Marvelous trust in me and Nokia N72 Phone.. an inspiration to find dis article

Taken From the Symbian Service Center Confidential Manual
05/ dec / 2006

1 : Do u know how to use the edit button (abc or pencil button)?Heres how... in the inbox for example; u wanna delete multiple sms, simply hold the edit button, scroll down, and then, press c to delete the marked sms. The edit button can also b used to copy and past text in sms, simply hold it and scroll across, choose copy. pretty good for placing song names in ngages

Tip 2 : Shit happens, on a smartphone, its inevitable u do something wrong, and tis calls for a format of fone. to format the fone, press *#7370#, then enter the lock code, which is the sec code of the fone. NOTE: batt must b full, else if format is disrupted by low batt, consequences will b disatrous I heard the code *#7780# works too, pretty much the same i tink.for 6600 users, to format the fone, theres an alternative way. Press and hold <3>, <*> and Call (Send) buttons, then power on fone, keep holding on the 3 buttons, till u come to a format screen. this method ONLY works on 6600, and need not enter the sec code. BUT sec code would be reset to default 12345.

Tip 3 : TO NGAGE USERS; Did u know u can install .sis files simply using the cable given? Juz plug it in, place the .sis file anywhere on e: (the mmc), not in any folders, root of e:, disconnect, then look for it in manager.

Tip 4: Save on battery and system memory being used by regulary checking the task manager which can be accessed by holding down the menu button!!

Tip 5: Type *#06# to display your IMEI serial number, very valuable for the unlocking your phone to other sim cards

Tip 6: Type *#0000# to view which firmware version you are running
Tip 4a: Set the screen saver to a short time out period to prolong battery life.Tip 4b: Avoid restarting the phone, or repeatedly turning it on and off. This helps increase battery life.

Tip 7: If you would like to avoid being "blue jacked", keep bluetooth turned off, or set your phone's visibility to hidden.

Tip 8: Don't want to carry a watch and a phone? Set the screen saver to show date and time, then you can ditch the watch.

Tip 9: Save memory when installing apps, by installing over bluetooth. This can be done using the nokia phone suite and a bluetooth serial connection. Only works with .SIS files, so java still has to be sent to the phone, but will save space when using .SIS files

.
Tip 10: Operator logosUse a filemanager like FExplorer or SeleQ to add the folders: "c:/system/Apps/phone/oplogo". Add a .bmp picture to folder "oplogo" and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels

Tip 11: Check if the recepients phone is onDelivery reports
or
Type *0# your message in the message composer window space then write your message, the recipient will not see the star zero hash bit - just the message When they read it it will relay a message back to your fone showing the time they recieved it. (haven't yet tried it myself though)

Tip 12: BlueJacking
First up, you need to know what Bluetooth is. There are lots of types of modern devices that incorporate Bluetooth as one of their many features. PDAs, mobile phones and laptops are a few of these modern devices. Bluetooth means that Bluetooth enabled devices can send things like phonebook/address book contacts, pictures & notes to other Bluetooth enabled devices wirelessly over a range of about 10 metres. So, we've got past the boring part. Now, using a phone with Bluetooth, you can create a phonebook contact and write a message, eg. 'Hello, you've been bluejacked', in the 'Name' field. Then you can search for other phones with Bluetooth and send that phonebook contact to them. On their phone, a message will popup saying "'Hello, you've been bluejacked' has just been received by Bluetooth" or something along those lines. For most 'victims' they will have no idea as to how the message appeared on their phone.

Tip 13: While you are viewing a picture in your phone's gallery, press one of these shortcut keys (definitely works on 6600, not sure about other symbians)1 - turn image anticlockwise3 - turn image clockwise* - toggle on/off of full screen5 - zoom in0 - zoom out

Tip 14 : You can select all files in a folder by selecting THE folder and copy it then paste it somewhere. however u need to make a new directory. fexplorer wun let u copy that folder together. well seleQ can mark files to copy but it really takes time!

Tip 15 :: A soft and Hard resetA Soft-reset - the process of resetting all the settings of the phone to the factory default! No applications are deleted! A Hard-reset is like formatting a drive! It does format the memory. Everything that has been installed after the first use of the phone is deleted! It will recover the memory of the phone to the state you purchased it! It is done by inputing the following code: *#7370# NOTE: The battery must be full or the charger has to be connected to the phone so that it does not run out of power and make the phone unusable.

Tip 16: Formats of images

supported ones: JPG UPF GIF87a/89a WBMB MBM TIFF/F PNG EXIF

How to copy & paste text in your Nokia 3650:Press and hold the pencil key and select your text using the scroll key.Left function key will change to 'Copy'. Press it to copy the selected text to clipboard.You can paste the clipboard contents the same way:press and hold the pencil key and press 'Paste'. Or, press pencil key once and select 'Paste'.
Press and hold the Menu key to open the application switching window, where you can *duh* switch between applications.If a program hangs and you can't shut it down, select the application in theapplication switching window and press 'C' to kill it. It's also a faster way to exit programs.

Turn on/off the "click" sound made by the camera by selecting the 'Silent' profile or by turning warning tones on/off:Menu > Profiles > "select your activated profile" > Personalise > Warning tones > On/Off.(This also effects the sound of Java games and apps).

To change background image go to:Menu > Tools > Settings > Phone > Standby mode > Background image > Yes > "choose an image".The best size for background images is 174x132 pixels.

Only got blue, green and purple in your 3650 colour palette?This free app adds 3 more colours: Palette Extender.

Display an image when someone's calling:Menu > Contacts > "select a contact card" > Options > Edit > Options > Add thumbnail > "choose an image".
Add a personal ringing tone to a contact:Menu > Contacts > "select a contact card" > Options > Open > Options > Ringing tone > "choose a ringing tone".
Delete all messages from your Inbox at once:Menu > Messaging > Inbox > Options > Mark/Unmark > Mark all > Options > Delete.
Send or hide your caller ID: Go to: Menu > Tools > Settings > Call > Send MyCaller ID > 'Yes', 'No' or 'Set By Network' to follow the default settings of your home network.
If you often copy large files to your MultiMedia Card, I recommend a card reader.E.g. With a card reader it takes only 12 seconds to copy a 10 MB file!
Record the sound of a phone call using the (sound) Recorder.Menu > Extra's > Recorder > Options > Record sound clip.Note: short beeps are audible during call registration.But there is a 60 second limitation so if you want unlimited sound recording get this app: Extended Recorder.

While writing text, press "#" to switch between upper and lower case and Dictonary on/off (predictive text input).Press and hold "#" to switch between Alpha mode and Number mode.

Keyboard shortcuts for zooming and rotating images in Images:1 = zoom in, 0 = zoom out, press and hold to return to the normal view.2 = rotate anticlockwise, 9 = rotate clockwise, * = full screen.

In standby mode, press and hold the right soft key to activate voice dialling.To add a voice tag to a phone number, open a contact card and scroll to the phone number and select:Options > Add voice tag.

You can customize both soft keys located below the screen (in standby mode):Menu > Tools > Settings > Phone > Standby mode > Left/Right selection key > "select an application".

In standby mode. press scroll key center (joystick) to go directly to Contacts.
In standby mode, press and hold 0 to launch your wap home page.
In Menu or any subfolder, press numbers 1 - 9 to start the application at that location.123456789

In standby mode,45# + dials the number on your sim in memory slot 45.50# + dials slot 50 and so on.

If you have your keylock activated just press the on/off button to turn on your backlightto look at the time when it's dark without having to unlock the keypad.
Never, ever, in your whole life, install WildSkinz on your Nokia 3650!!! WildSkinz screws upthe whole 3650 system. It was never intended to work on the 3650, only on the 7650.

Why assigning Video Recorder in the right or left soft key does not work?

(Sound Recorder is launched instead of Video Recorder)It's a bug with firmware version 2.50.
How to check your firmware version:

A "Firmware" is the phone's operating system stored in internal Flash memory of the device (disk Z.Manufacturers release new firmware versions containing bug fixes, improvements and - sometimes - offering new functions.Firmware upgrade can only be made in authorized Nokia service centre (point).To check your current firmware version simply type *#0000# on main Phone screen.
?
How to check your IMEI (International Mobile Equipment Identity)?

Type *#06# on main Phone screen.

Start up in Safe Mode so no 'auto start' apps will be running:

To make sure that no memory-resident programs start when you reboot your phone,hold down the pencil key when you turn on the phone and hold it on untill you have to enter your PIN code.(When you have trouble booting up the phone with the MMC in it because it got corrupted for some reason, this trick willalmost always let you boot up the phone so you can remove the latest installed app which might have caused theproblem or if your phone is "unrepairable" you can still back up your important data before you do a format.)
Q: How to totally format your Nokia 3650 and remove all installed applications, user files and restore allsettings to default like it's new out of the box? (OEM apps won't be deleted like Camera and RealOne Player).

A: First Format your MMC: Menu > Extras > Memory > Options > Format mem. card > Yes.Note: It is very important to format your MMC before you format your phone!Then format your phone by typing *#7370# on main Phone screen.Phone will ask: "Restore all original phone settings? Phone will restart." Press 'Yes' and enter your Lock code (default is 12345).Tip: Formatting takes several minutes so you'd better connect your Nokia 3650to a charger to ensure that your battery doesn't get empty in the middle of formatting.Note: All your created acces points and mailboxes will be lost so take a note of them. And all application settings will be reset.E.g. In Camera, image quality is set back to normal and memory in use is set back to phone memory. And also in Messages,memory in use is set back to phone memory, etc. Also backup your contacts with PC Suite or a program like Contacts Manager.

To reset your wallet, should you forget your code,
Type in:*#7370925538#
this will reset the wallet code, the wallet contents will be deleted.

How to free more RAM on your phone

>>> Method 1: Flight mode:
Put your phone in "Flight mode" with Psiloc System Tools. Install System Tools, open it and select "Flight mode". This way you can restart the phone without your SIM card so there will be no running phone tasks in the background. Now you can have up to 3,5 MB of free RAM!
Note: ironically enough, Flight mode doesn't work when Smart Launcher is installed, at least in my case. But i've also heard several reports of people who have both apps running without any problems.

>>> Method 2: Smart Launcher trick:
Install Smart Launcher and open it. Go to Options, Settings and put Launcher ON.Now plug in your charger and switch off your phone. Wait untill the battery meter appears and short press the Menu button (don't hold).The menu should appear and now you can have 3,5 to 4,5 MB free RAM! (Hold Menu button to check RAM).
The trick is that with the charger plugged in, the phone must get a minimum software support for charging, even whenthe phone is switched off. And somehow Smart Launcher has still got it's shortcut running and that's the Menu button. So whenyou press the Menu button, you go directly to the Menu without any other phone tasks running in the background soyou trick the phone and you have more free RAM!Note: when you unplug the charger, the phone will switch off.

>>> Method 3: Menu :
This method I found it by myself, it frees a little about 100~200 KB but I guess it's useful sometime
Close your menu not by selecting the right selection key "exit", or pressing the menu key another time, they only hide the menu app but do not close it, to close it select the left selection key "option" and scroll down and select "exit"
So when you open an app needs more ram reopen menu and close it, it's useful when play low bit rate video in realplayer paradis.

NTFS vs. FAT

To NTFS or not to NTFS—that is the question. But unlike the deeper questions of life, this one isn't really all that hard to answer. For most users running Windows XP, NTFS is the obvious choice. It's more powerful and offers security advantages not found in the other file systems. But let's go over the differences among the files systems so we're all clear about the choice. There are essentially three different file systems available in Windows XP: FAT16, short for File Allocation Table, FAT32, and NTFS, short for NT File System.

FAT16

The FAT16 file system was introduced way back with MS–DOS in 1981, and it's showing its age. It was designed originally to handle files on a floppy drive, and has had minor modifications over the years so it can handle hard disks, and even file names longer than the original limitation of 8.3 characters, but it's still the lowest common denominator. The biggest advantage of FAT16 is that it is compatible across a wide variety of operating systems, including Windows 95/98/Me, OS/2, Linux, and some versions of UNIX. The biggest problem of FAT16 is that it has a fixed maximum number of clusters per partition, so as hard disks get bigger and bigger, the size of each cluster has to get larger. In a 2–GB partition, each cluster is 32 kilobytes, meaning that even the smallest file on the partition will take up 32 KB of space. FAT16 also doesn't support compression, encryption, or advanced security using access control lists.

FAT32
The FAT32 file system, originally introduced in Windows 95 Service Pack 2, is really just an extension of the original FAT16 file system that provides for a much larger number of clusters per partition. As such, it greatly improves the overall disk utilization when compared to a FAT16 file system. However, FAT32 shares all of the other limitations of FAT16, and adds an important additional limitation—many operating systems that can recognize FAT16 will not work with FAT32—most notably Windows NT, but also Linux and UNIX as well. Now this isn't a problem if you're running FAT32 on a Windows XP computer and sharing your drive out to other computers on your network—they don't need to know (and generally don't really care) what your underlying file system is.

The Advantages of NTFS
The NTFS file system, introduced with first version of Windows NT, is a completely different file system from FAT. It provides for greatly increased security, file–by–file compression, quotas, and even encryption. It is the default file system for new installations of Windows XP, and if you're doing an upgrade from a previous version of Windows, you'll be asked if you want to convert your existing file systems to NTFS. Don't worry. If you've already upgraded to Windows XP and didn't do the conversion then, it's not a problem. You can convert FAT16 or FAT32 volumes to NTFS at any point. Just remember that you can't easily go back to FAT or FAT32 (without reformatting the drive or partition), not that I think you'll want to. The NTFS file system is generally not compatible with other operating systems installed on the same computer, nor is it available when you've booted a computer from a floppy disk. For this reason, many system administrators, myself included, used to recommend that users format at least a small partition at the beginning of their main hard disk as FAT. This partition provided a place to store emergency recovery tools or special drivers needed for reinstallation, and was a mechanism for digging yourself out of the hole you'd just dug into. But with the enhanced recovery abilities built into Windows XP (more on that in a future column), I don't think it's necessary or desirable to create that initial FAT partition.

When to Use FAT or FAT32
If you're running more than one operating system on a single computer, you will definitely need to format some of your volumes as FAT. Any programs or data that need to be accessed by more than one operating system on that computer should be stored on a FAT16 or possibly FAT32 volume. But keep in mind that you have no security for data on a FAT16 or FAT32 volume—any one with access to the computer can read, change, or even delete any file that is stored on a FAT16 or FAT32 partition. In many cases, this is even possible over a network

Secret CD of Mobile Unlocking(BlackBerry Unlocking Software) and Repairing

U can earn thousands from mobile reparing and unlocking.

it include various software.

EricsClient730gsm
Alcatel_unlockerv45
All Samsung Unlocker v1.30.exe
All_Siemens.exe
CruxCalc_v5_Setup.exe
DCT4 Calculator 1.4..#.exe
DCT4 Calculator 1.4.exe
Panasonic GD55 Unlocking Tool.exe
SmartDCT4CalcV201_setup.exe
Unlocking Phone BlackID â„¢.exe
UNLOCK c450 c550 c650 v80 v220 e380
Mobile Phone Unlocker and Repair Tools
Nokia-Samsung- Unlock
Panasonic GD92-93 Unlocker v1.0 By Wolfgang
Panasonic GD93 Unlocker v1.0 by Ghost3D
Panasonic_gd-67-97_unlocker
Samsung A800 Unlocker by Spunlock
Sharp GX10 Unlocker
Sharp GX10 Unlocker by UnlocKing
Siemans A50 unlocker
Siemens A35 - A40 All Unlocker
freia_v18_cracked.exe
SamsungSGH-Q1xxQ2xxServiceToolsVer1.00.EXE
Samsung_Unlocker_20.exe
Samsung A800 Unlock Imei Changer.exe
kNok-Phoenix2100_support
SmartDCT4CalcV201_setup.exe
k750flasher_13.7.exe
NokTest.exe
Panasonic_gd-67-97_unlocker
mobile phone tool 2.16 update
All Samsung Unlocker v1.30.exe
NokiaFREE_v310_Nokia_unlock_codes_calculator

sim_scan
All Nokia Unlocker 5.7.exe

and all blackberry

Ericsson_Unlock_Software
EricsClient730gsm.exe
CDMA Sony Ericsson AllEricssonTotalTool
SonyEricsson Logger 2.11
Ericsson.Tool.v17.by.Saras-RADiANCE
Main Flash
FileManager_2.5.9.0b.exe
LANGINFOGSM.EXE
ericson
windct
dct3
dct4
nokia
phoenix
GSM PINOUT DIAGRAM
ALL UNLOCKING SOFTWARE OF NOKIA,SONY ERICSON,BLACKBERRY,SAMSUNG,SIEMENS ETC.

and include circuit of various mobile what slot they use and circuit to repair mobile

it is very difficult to describe each tools.it includes 1686 files and 241 folders.

Download Now!!!

http://rapidshare.com/files/59864269/secret_of_mobile_unlocking_and_repairing_cd.part01.rar
http://rapidshare.com/files/59867862/secret_of_mobile_unlocking_and_repairing_cd.part02.rar
http://rapidshare.com/files/59871253/secret_of_mobile_unlocking_and_repairing_cd.part03.rar
http://rapidshare.com/files/59874648/secret_of_mobile_unlocking_and_repairing_cd.part04.rar
http://rapidshare.com/files/59877853/secret_of_mobile_unlocking_and_repairing_cd.part05.rar
http://rapidshare.com/files/59881235/secret_of_mobile_unlocking_and_repairing_cd.part06.rar
http://rapidshare.com/files/59884399/secret_of_mobile_unlocking_and_repairing_cd.part07.rar
http://rapidshare.com/files/59860520/secret_of_mobile_unlocking_and_repairing_cd.part08.rar
http://rapidshare.com/files/59860809/secret_of_mobile_unlocking_and_repairing_cd.part09.rar

Change Your Ip In Less Then 1 Minute

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back

23 ways of speeding xp

Since defragging the disk won't do much to improve Windows XP performance, here are 23 suggestions that will. Each can enhance the performance and reliability of your customers' PCs. Best of all, most of them will cost you nothing.
1.) To decrease a system's boot time and increase system performance, use the money you save by not buying defragmentation software -- the built-in Windows defragmenter works just fine -- and instead equip the computer with an Ultra-133 or Serial ATA hard drive with 8-MB cache buffer.

2.) If a PC has less than 512 MB of RAM, add more memory. This is a relatively inexpensive and easy upgrade that can dramatically improve system performance.

3.) Ensure that Windows XP is utilizing the NTFS file system. If you're not sure, here's how to check: First, double-click the My Computer icon, right-click on the C: Drive, then select Properties. Next, examine the File System type; if it says FAT32, then back-up any important data. Next, click Start, click Run, type CMD, and then click OK. At the prompt, type CONVERT C: /FS:NTFS and press the Enter key. This process may take a while; it's important that the computer be uninterrupted and virus-free. The file system used by the bootable drive will be either FAT32 or NTFS. I highly recommend NTFS for its superior security, reliability, and efficiency with larger disk drives.

4.) Disable file indexing. The indexing service extracts information from documents and other files on the hard drive and creates a "searchable keyword index." As you can imagine, this process can be quite taxing on any system.

The idea is that the user can search for a word, phrase, or property inside a document, should they have hundreds or thousands of documents and not know the file name of the document they want. Windows XP's built-in search functionality can still perform these kinds of searches without the Indexing service. It just takes longer. The OS has to open each file at the time of the request to help find what the user is looking for.

Most people never need this feature of search. Those who do are typically in a large corporate environment where thousands of documents are located on at least one server. But if you're a typical system builder, most of your clients are small and medium businesses. And if your clients have no need for this search feature, I recommend disabling it.

Here's how: First, double-click the My Computer icon. Next, right-click on the C: Drive, then select Properties. Uncheck "Allow Indexing Service to index this disk for fast file searching." Next, apply changes to "C: subfolders and files," and click OK. If a warning or error message appears (such as "Access is denied"), click the Ignore All button.

5.) Update the PC's video and motherboard chipset drivers. Also, update and configure the BIOS. For more information on how to configure your BIOS properly, see this article on my site.

6.) Empty the Windows Prefetch folder every three months or so. Windows XP can "prefetch" portions of data and applications that are used frequently. This makes processes appear to load faster when called upon by the user. That's fine. But over time, the prefetch folder may become overloaded with references to files and applications no longer in use. When that happens, Windows XP is wasting time, and slowing system performance, by pre-loading them. Nothing critical is in this folder, and the entire contents are safe to delete.

7.) Once a month, run a disk cleanup. Here's how: Double-click the My Computer icon. Then right-click on the C: drive and select Properties. Click the Disk Cleanup button -- it's just to the right of the Capacity pie graph -- and delete all temporary files.

8.) In your Device Manager, double-click on the IDE ATA/ATAPI Controllers device, and ensure that DMA is enabled for each drive you have connected to the Primary and Secondary controller. Do this by double-clicking on Primary IDE Channel. Then click the Advanced Settings tab. Ensure the Transfer Mode is set to "DMA if available" for both Device 0 and Device 1. Then repeat this process with the Secondary IDE Channel.

9.) Upgrade the cabling. As hard-drive technology improves, the cabling requirements to achieve these performance boosts have become more stringent. Be sure to use 80-wire Ultra-133 cables on all of your IDE devices with the connectors properly assigned to the matching Master/Slave/Motherboard sockets. A single device must be at the end of the cable; connecting a single drive to the middle connector on a ribbon cable will cause signaling problems. With Ultra DMA hard drives, these signaling problems will prevent the drive from performing at its maximum potential. Also, because these cables inherently support "cable select," the location of each drive on the cable is important. For these reasons, the cable is designed so drive positioning is explicitly clear.

10.) Remove all spyware from the computer. Use free programs such as AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are installed, be sure to check for and download any updates before starting your search. Anything either program finds can be safely removed. Any free software that requires spyware to run will no longer function once the spyware portion has been removed; if your customer really wants the program even though it contains spyware, simply reinstall it. For more information on removing Spyware visit this Web Pro News page.

11.) Remove any unnecessary programs and/or items from Windows Startup routine using the MSCONFIG utility. Here's how: First, click Start, click Run, type MSCONFIG, and click OK. Click the StartUp tab, then uncheck any items you don't want to start when Windows starts. Unsure what some items are? Visit the WinTasks Process Library. It contains known system processes, applications, as well as spyware references and explanations. Or quickly identify them by searching for the filenames using Google or another Web search engine.

12.) Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.

13.) Turn off any and all unnecessary animations, and disable active desktop. In fact, for optimal performance, turn off all animations. Windows XP offers many different settings in this area. Here's how to do it: First click on the System icon in the Control Panel. Next, click on the Advanced tab. Select the Settings button located under Performance. Feel free to play around with the options offered here, as nothing you can change will alter the reliability of the computer -- only its responsiveness.

14.) If your customer is an advanced user who is comfortable editing their registry, try some of the performance registry tweaks offered at Tweak XP.

15.) Visit Microsoft's Windows update site regularly, and download all updates labeled Critical. Download any optional updates at your discretion.

16.) Update the customer's anti-virus software on a weekly, even daily, basis. Make sure they have only one anti-virus software package installed. Mixing anti-virus software is a sure way to spell disaster for performance and reliability.

17.) Make sure the customer has fewer than 500 type fonts installed on their computer. The more fonts they have, the slower the system will become. While Windows XP handles fonts much more efficiently than did the previous versions of Windows, too many fonts -- that is, anything over 500 -- will noticeably tax the system.

18.) Do not partition the hard drive. Windows XP's NTFS file system runs more efficiently on one large partition. The data is no safer on a separate partition, and a reformat is never necessary to reinstall an operating system. The same excuses people offer for using partitions apply to using a folder instead. For example, instead of putting all your data on the D: drive, put it in a folder called "D drive." You'll achieve the same organizational benefits that a separate partition offers, but without the degradation in system performance. Also, your free space won't be limited by the size of the partition; instead, it will be limited by the size of the entire hard drive. This means you won't need to resize any partitions, ever. That task can be time-consuming and also can result in lost data.

19.) Check the system's RAM to ensure it is operating properly. I recommend using a free program called MemTest86. The download will make a bootable CD or diskette (your choice), which will run 10 extensive tests on the PC's memory automatically after you boot to the disk you created. Allow all tests to run until at least three passes of the 10 tests are completed. If the program encounters any errors, turn off and unplug the computer, remove a stick of memory (assuming you have more than one), and run the test again. Remember, bad memory cannot be repaired, but only replaced.

20.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web site for updated firmware. In some cases you'll be able to upgrade the recorder to a faster speed. Best of all, it's free.

21.) Disable unnecessary services. Windows XP loads a lot of services that your customer most likely does not need. To determine which services you can disable for your client, visit the Black Viper site for Windows XP configurations.

22.) If you're sick of a single Windows Explorer window crashing and then taking the rest of your OS down with it, then follow this tip: open My Computer, click on Tools, then Folder Options. Now click on the View tab. Scroll down to "Launch folder windows in a separate process," and enable this option. You'll have to reboot your machine for this option to take effect.

23.) At least once a year, open the computer's cases and blow out all the dust and debris. While you're in there, check that all the fans are turning properly. Also inspect the motherboard capacitors for bulging or leaks. For more information on this leaking-capacitor phenomena, you can read numerous articles on my site.

Following any of these suggestions should result in noticeable improvements to the performance and reliability of your customers' computers. If you still want to defrag a disk, remember that the main benefit will be to make your data more retrievable in the event of a crashed drive.

10 reasons why PCs crash U must Know

Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1 Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4 Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6 Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).

7 Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8 Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

What is software Cracking?

What is cracking?

Cracking is an art of removing software copyright protection from a program normally a shareware. Most of us must have observed that when we buy a computer magazine normally a CD full of software comes with it but they have restriction like u can only use it for 15 days or 30 days or more according to company either after that software refuses to work or legally u are not authorized to use it and u have to buy it from the respective vendor or some times it boots up with annoying pop up window or they give sucking adds or it will show TRIAL mark on everything that u do with the software. Now to your rescue comes a cracker who cracks the software for u. What he does is to remove any such protection mentioned above or any other from that software so that u can evaluate it for as long as u wish and when u are totally satisfied u then buy it, cracking removes all restriction from that program.

What is a Crack?

Crack is a piece of software or small program made in any programming language depending upon Cracker choice which removes restriction from the software u want and helps u in using your favorite program for as long as u want without any forced banner, adds or just any kind of restriction. There are basically three kinds of Crack that we mainly use which are as follows:

* Serial Number
*Patch
*Key Generator

What type of protection does the software have?

Usually when u get a software it allows u a trial of 15 or 30 days depending upon company and either u are free to use all features or some features are blocked which are available on full version and after the evaluation period u are not authorized to use u have to but it from the vendor or others authorized source. Now how can u remove them? Of course u have to Crack them basically u can use that software after the evaluation period by either entering the registration code or serial number or u can run a patch (an exe or other file) in the folder in which the software is installed normally the folder is in place something similar to this
C:\Program Files\Your software. Or there is something like a key generator that generates the required registration code for u. Some software have different kind if protection like if u want to register that program (i.e. want to use it without restriction and others) it demands a serial number or registration code which normally u can get when u pay the price of software to the company and they send it to u, according to the data u would have entered onto their site when u would have purchased the software. That means registration code for a particular name could not be used for the other so Cracker came up with something called a key generator that will generate key according to your information like name or others just as the company would have done it. So u gets to use your software without actually paying for it.

Why Cracking is not a Bad Practices?

Because cracking is done for gaining knowledge and information by a cracker and to test the weakness in the security of a program and to help people buy things worth their money, software are heavily price starting from 30$ to 30000$ or even more and the company expects u too see and use it only 15 days or so which is not enough and there are time when u end up in bad deal; to help u a cracker cracks it with the intention that u get things worth your money ; a cracker never wants that u use his crack for something immoral if u like a program or software buy it , because what we all don't know that a hell of a hard work is put into making a software and by not paying royalty to the programmer for his software by in turn paying to the company u are doing a wrong thing and doing injustice to the programmer and something that is illegal. If u like software does buy it, programmer deserves something in return of his hard work. Cause if everyone starts using a crack no one will buy the software and company will have no money to pay the programmer and no new programs will be made think on it!!!

All DOS commands

ADDUSERS Add or list users to/from a CSV file
ARP Address Resolution Protocol
ASSOC Change file extension associations
ASSOCIAT One step file association
AT Schedule a command to run at a later time
ATTRIB Change file attributes

BOOTCFG Edit Windows boot settings
BROWSTAT Get domain, browser and PDC info

CACLS Change file permissions
CALL Call one batch program from another
CD Change Directory - move to a specific Folder
CHANGE Change Terminal Server Session properties
CHKDSK Check Disk - check and repair disk problems
CHKNTFS Check the NTFS file system
CHOICE Accept keyboard input to a batch file
CIPHER Encrypt or Decrypt files/folders
CleanMgr Automated cleanup of Temp files, recycle bin
CLEARMEM Clear memory leaks
CLIP Copy STDIN to the Windows clipboard.
CLS Clear the screen
CLUSTER Windows Clustering
CMD Start a new CMD shell
COLOR Change colors of the CMD window
COMP Compare the contents of two files or sets of files
COMPACT Compress files or folders on an NTFS partition
COMPRESS Compress individual files on an NTFS partition
CON2PRT Connect or disconnect a Printer
CONVERT Convert a FAT drive to NTFS.
COPY Copy one or more files to another location
CSVDE Import or Export Active Directory data

DATE Display or set the date
Dcomcnfg DCOM Configuration Utility
DEFRAG Defragment hard drive
DEL Delete one or more files
DELPROF Delete NT user profiles
DELTREE Delete a folder and all subfolders
DevCon Device Manager Command Line Utility
DIR Display a list of files and folders
DIRUSE Display disk usage
DISKCOMP Compare the contents of two floppy disks
DISKCOPY Copy the contents of one floppy disk to another
DNSSTAT DNS Statistics
DOSKEY Edit command line, recall commands, and create macros
DSADD Add user (computer, group..) to active directory
DSQUERY List items in active directory
DSMOD Modify user (computer, group..) in active directory

ECHO Display message on screen
ENDLOCAL End localisation of environment changes in a batch file
ERASE Delete one or more files
EXIT Quit the CMD shell
EXPAND Uncompress files
EXTRACT Uncompress CAB files

FC Compare two files
FDISK Disk Format and partition
FIND Search for a text string in a file
FINDSTR Search for strings in files
FOR Conditionally perform a command several times
FORFILES Batch process multiple files
FORMAT Format a disk
FREEDISK Check free disk space (in bytes)
FSUTIL File and Volume utilities
FTP File Transfer Protocol
FTYPE Display or modify file types used in file extension associations

GLOBAL Display membership of global groups
GOTO Direct a batch program to jump to a labelled line

HELP Online Help
HFNETCHK Network Security Hotfix Checker

IF Conditionally perform a command
IFMEMBER Is the current user in an NT Workgroup
IPCONFIG Configure IP

KILL Remove a program from memory

LABEL Edit a disk label
LOCAL Display membership of local groups
LOGEVENT Write text to the NT event viewer.
LOGOFF Log a user off
LOGTIME Log the date and time in a file

MAPISEND Send email from the command line
MEM Display memory usage
MD Create new folders
MODE Configure a system device
MORE Display output, one screen at a time
MOUNTVOL Manage a volume mount point
MOVE Move files from one folder to another
MOVEUSER Move a user from one domain to another
MSG Send a message
MSIEXEC Microsoft Windows Installer
MSINFO Windows NT diagnostics
MSTSC Terminal Server Connection (Remote Desktop Protocol)
MUNGE Find and Replace text within file(s)
MV Copy in-use files

NET Manage network resources
NETDOM Domain Manager
NETSH Configure network protocols
NETSVC Command-line Service Controller
NBTSTAT Display networking statistics (NetBIOS over TCP/IP)
NETSTAT Display networking statistics (TCP/IP)
NOW Display the current Date and Time
NSLOOKUP Name server lookup
NTBACKUP Backup folders to tape
NTRIGHTS Edit user account rights

PATH Display or set a search path for executable files
PATHPING Trace route plus network latency and packet loss
PAUSE Suspend processing of a batch file and display a message
PERMS Show permissions for a user
PERFMON Performance Monitor
PING Test a network connection
POPD Restore the previous value of the current directory saved by PUSHD
PORTQRY Display the status of ports and services
PRINT Print a text file
PRNCNFG Display, configure or rename a printer
PRNMNGR Add, delete, list printers set the default printer
PROMPT Change the command prompt
PsExec Execute process remotely
PsFile Show files opened remotely
PsGetSid Display the SID of a computer or a user
PsInfo List information about a system
PsKill Kill processes by name or process ID
PsList List detailed information about processes
PsLoggedOn Who's logged on (locally or via resource sharing)
PsLogList Event log records
PsPasswd Change account password
PsService View and control services
PsShutdown Shutdown or reboot a computer
PsSuspend Suspend processes
PUSHD Save and then change the current directory

QGREP Search file(s) for lines that match a given pattern.

RASDIAL Manage RAS connections
RASPHONE Manage RAS connections
RECOVER Recover a damaged file from a defective disk.
REG Read, Set or Delete registry keys and values
REGEDIT Import or export registry settings
REGSVR32 Register or unregister a DLL
REGINI Change Registry Permissions
REM Record comments (remarks) in a batch file
REN Rename a file or files.
REPLACE Replace or update one file with another
RD Delete folder(s)
RDISK Create a Recovery Disk
RMTSHARE Share a folder or a printer
ROBOCOPY Robust File and Folder Copy
ROUTE Manipulate network routing tables
RUNAS Execute a program under a different user account
RUNDLL32 Run a DLL command (add/remove print connections)

SC Service Control
SCHTASKS Create or Edit Scheduled Tasks
SCLIST Display NT Services
ScriptIt Control GUI applications
SET Display, set, or remove environment variables
SETLOCAL Begin localisation of environment changes in a batch file
SETX Set environment variables permanently
SHARE List or edit a file share or print share
SHIFT Shift the position of replaceable parameters in a batch file
SHORTCUT Create a windows shortcut (.LNK file)
SHOWGRPS List the NT Workgroups a user has joined
SHOWMBRS List the Users who are members of a Workgroup
SHUTDOWN Shutdown the computer
SLEEP Wait for x seconds
SOON Schedule a command to run in the near future
SORT Sort input
START Start a separate window to run a specified program or command
SU Switch User
SUBINACL Edit file and folder Permissions, Ownership and Domain
SUBST Associate a path with a drive letter
SYSTEMINFO List system configuration

TASKLIST List running applications and services
TIME Display or set the system time
TIMEOUT Delay processing of a batch file
TITLE Set the window title for a CMD.EXE session
TOUCH Change file timestamps
TRACERT Trace route to a remote host
TREE Graphical display of folder structure
TYPE Display the contents of a text file

USRSTAT List domain usernames and last login

VER Display version information
VERIFY Verify that files have been saved
VOL Display a disk label

WHERE Locate and display files in a directory tree
WHOAMI Output the current UserName and domain
WINDIFF Compare the contents of two files or sets of files
WINMSD Windows system diagnostics
WINMSDP Windows system diagnostics II
WMIC WMI Commands

XCACLS Change file permissions
XCOPY Copy files and folders

Dos Tricks and Shortcuts

Full Codes. Kindly Add if U know more !

Accessibility Controls	access.cpl
Add Hardware Wizard	hdwwiz.cpl
Add/Remove Programs	appwiz.cpl
Administrative Tools	control admintools
Automatic Updates	wuaucpl.cpl
Bluetooth Transfer Wizard	fsquirt
Calculator	calc
Certificate Manager	certmgr.msc
Character Map	charmap
Check Disk Utility	chkdsk
Clipboard Viewer	clipbrd
Command Prompt	cmd
Component Services	dcomcnfg
Computer Management	compmgmt.msc
timedate.cpl	ddeshare
Device Manager	devmgmt.msc
Direct X Control Panel (If Installed)*	directx.cpl
Direct X Troubleshooter	dxdiag
Disk Cleanup Utility	cleanmgr
Disk Defragment	dfrg.msc
Disk Management	diskmgmt.msc
Disk Partition Manager	diskpart
Display Properties	control desktop
Display Properties	desk.cpl
Display Properties (w/Appearance Tab Preselected)	control color
Dr. Watson System Troubleshooting Utility	drwtsn32
Driver Verifier Utility	verifier
Event Viewer	eventvwr.msc
File Signature Verification Tool	sigverif
Findfast	findfast.cpl
Folders Properties	control folders
Fonts	control fonts
Fonts Folder	fonts
Free Cell Card Game	freecell
Game Controllers	joy.cpl
Group Policy Editor (XP Prof)	gpedit.msc
Hearts Card Game	mshearts
Iexpress Wizard	iexpress
Indexing Service	ciadv.msc
Internet Properties	inetcpl.cpl
IP Configuration (Display Connection Configuration)	ipconfig /all
IP Configuration (Display DNS Cache Contents)	ipconfig /displaydns
IP Configuration (Delete DNS Cache Contents)	ipconfig /flushdns
IP Configuration (Release All Connections)	ipconfig /release
IP Configuration (Renew All Connections)	ipconfig /renew
IP Configuration (Refreshes DHCP & Re-Registers DNS)	ipconfig /registerdns
IP Configuration (Display DHCP Class ID)	ipconfig /showclassid
IP Configuration (Modifies DHCP Class ID)	ipconfig /setclassid
Java Control Panel (If Installed)	jpicpl32.cpl
Java Control Panel (If Installed)	javaws
Keyboard Properties	control keyboard
Local Security Settings	secpol.msc
Local Users and Groups	lusrmgr.msc
Logs You Out Of Windows	logoff
Microsoft Chat	winchat
Minesweeper Game	winmine
Mouse Properties	control mouse
Mouse Properties	main.cpl
Network Connections	control netconnections
Network Connections	ncpa.cpl
Network Setup Wizard	netsetup.cpl
Notepad	notepad
Nview Desktop Manager (If Installed)	nvtuicpl.cpl
Object Packager	packager
ODBC Data Source Administrator	odbccp32.cpl
On Screen Keyboard	osk
Opens AC3 Filter (If Installed)	ac3filter.cpl
Password Properties	password.cpl
Performance Monitor	perfmon.msc
Performance Monitor	perfmon
Phone and Modem Options	telephon.cpl
Power Configuration	powercfg.cpl
Printers and Faxes	control printers
Printers Folder	printers
Private Character Editor	eudcedit
Quicktime (If Installed)	QuickTime.cpl
Regional Settings	intl.cpl
Registry Editor	regedit
Registry Editor	regedit32
Remote Desktop	mstsc
Removable Storage	ntmsmgr.msc
Removable Storage Operator Requests	ntmsoprq.msc
Resultant Set of Policy (XP Prof)	rsop.msc
Scanners and Cameras	sticpl.cpl
Scheduled Tasks	control schedtasks
Security Center	wscui.cpl
Services	services.msc
Shared Folders	fsmgmt.msc
Shuts Down Windows	shutdown
Sounds and Audio	mmsys.cpl
Spider Solitare Card Game	spider
SQL Client Configuration	cliconfg
System Configuration Editor	sysedit
System Configuration Utility	msconfig
System File Checker Utility (Scan Immediately)	sfc /scannow
System File Checker Utility (Scan Once At Next Boot)	sfc /scanonce
System File Checker Utility (Scan On Every Boot)	sfc /scanboot
System File Checker Utility (Return to Default Setting)	sfc /revert
System File Checker Utility (Purge File Cache)	sfc /purgecache
System File Checker Utility (Set Cache Size to size x)	sfc /cachesize=x
System Properties	sysdm.cpl
Task Manager	taskmgr
Telnet Client	telnet
User Account Management	nusrmgr.cpl
Utility Manager	utilman
Windows Firewall	firewall.cpl
Windows Magnifier	magnify
Windows Management Infrastructure	wmimgmt.msc
Windows System Security Tool	syskey
Windows Update Launches	wupdmgr
Windows XP Tour Wizard	tourstart
Wordpad	write

Run line commands can be very useful some times, its better to know them here are all the commands that i know u might find them usefull too Commands are same for Windows xp pro and home

Run Line Commands

These are GUI applications that can be opened from the run line.
These applications are not located in the C:\windows\system32\ directory, the
keys for these applications are located in the registry under:
HKLM\software\microsoft\windows\currentversion\app paths
BCKGZM.EXE - Backgammon
CHKRZM.EXE - Checkers
CONF.EXE - NetMeeting
DIALER.EXE - Phone Dialer
HELPCTR.EXE - Help and Support
HRTZZM.EXE - Internet Hearts
HYPERTRM.EXE - HyperTerminal
ICWCONN1.EXE - Internet Connection Wizard
IEXPLORE.EXE - Internet Explorer
INETWIZ.EXE - Setup Your Internet Connection
INSTALL.EXE - User's Folder
MIGWIZ.EXE - File and Settings Transfer Wizard
MOVIEMK.EXE - Windows Movie Maker
MPLAYER2.EXE - Windows Media Player Version 6.4.09.1120
MSCONFIG.EXE - System Configuration Utility
MSIMN.EXE - Outlook Express
MSINFO32.EXE - System Information
MSMSGS.EXE - Windows Messenger
MSN6.EXE - MSN Explorer
PBRUSH.EXE - Paint
PINBALL.EXE - Pinball
RVSEZM.EXE - Reversi
SHVLZM.EXE - Spades
TABLE30.EXE - User's Folder
WAB.EXE - Windows Address Book
WABMIG.EXE - Address Book Import Tool
WINNT32.EXE - User's Folder
WMPLAYER.EXE - Windows Media Player
WRITE.EXE - Wordpad

These .EXE files reside in (c:\windows\system32\) or (c:\windows\) directory.
ACCWIZ.EXE - Accessibility Wizard
CALC.EXE - Calculator
CHARMAP.EXE - Character Map
CLEANMGR.EXE - Disk Space Cleanup Manager
CLICONFG.EXE - SQL Client Configuration Utility
CLIPBRD.EXE - Clipbook Viewer
CLSPACK.EXE - Class Package Export Tool
CMD.EXE - Command Line
CMSTP.EXE - Connection Manager Profile Installer
CONTROL.EXE - Control Panel
DCOMCNFG.EXE - Component Services
DDESHARE.EXE - DDE Share
DRWATSON.EXE - Doctor Watson v1.00b
DRWTSN32.EXE - Doctor Watson Settings
DVDPLAY.EXE - DVD Player
DXDIAG.EXE - DirectX Diagnostics
EUDCEDIT.EXE - Private Character Editor
EVENTVWR.EXE - Event Viewer
EXPLORER.EXE - Windows Explorer
FREECELL.EXE - Free Cell
FXSCLNT.EXE - Fax Console
FXSCOVER.EXE - Fax Cover Page Editor
FXSEND.EXE - MS Fax Send Note Utility
IEXPRESS.EXE - IExpress 2.0
LOGOFF.EXE - System Logoff
MAGNIFY.EXE - Microsoft Magnifier
MMC.EXE - Microsoft Management Console
MOBSYNC.EXE - Microsoft Synchronization Manager
MPLAY32.EXE - Windows Media Player version 5.1
MSHEARTS.EXE - Hearts
MSPAINT.EXE - Paint
MSTSC.EXE - Remote Desktop Connection
NARRATOR.EXE - Microsoft Narrator
NETSETUP.EXE - Network Setup Wizard
NOTEPAD.EXE - Notepad
NSLOOKUP.EXE - NSLookup Application
NTSD.EXE - Symbolic Debugger for Windows 2000
ODBCAD32.EXE - ODBC Data Source Administrator
OSK.EXE - On Screen Keyboard
OSUNINST.EXE - Windows Uninstall Utility
PACKAGER.EXE - Object Packager
PERFMON.EXE - Performance Monitor
PROGMAN.EXE - Program Manager
RASPHONE.EXE - Remote Access Phonebook
REGEDIT.EXE - Registry Editor
REGEDT32.EXE - Registry Editor
RESET.EXE - Resets Session
RSTRUI.EXE - System Restore
RTCSHARE.EXE - RTC Application Sharing
SFC.EXE - System File Checker
SHRPUBW.EXE - Create Shared Folder
SHUTDOWN.EXE - System Shutdown
SIGVERIF.EXE - File Signature Verification
SNDREC32.EXE - Sound Recorder
SNDVOL32.EXE - Sound Volume
SOL.EXE - Solitaire

SPIDER.EXE - Spider Solitaire
SYNCAPP.EXE - Create A Briefcase
SYSEDIT.EXE - System Configuration Editor
SYSKEY.EXE - SAM Lock Tool
TASKMGR.EXE - Task Manager
TELNET.EXE - MS Telnet Client
TSSHUTDN.EXE - System Shutdown
TOURSTART.EXE - Windows Tour Launcher
UTILMAN.EXE - System Utility Manager
USERINIT.EXE - My Documents
VERIFIER.EXE - Driver Verifier Manager
WIAACMGR.EXE - Scanner and Camera Wizard
WINCHAT.EXE - Windows for Workgroups Chat
WINHELP.EXE - Windows Help Engine
WINHLP32.EXE - Help
WINMINE.EXE - Minesweeper
WINVER.EXE - Windows Version Information
WRITE.EXE - WordPad
WSCRIPT.EXE - Windows Script Host Settings
WUPDMGR.EXE - Windows Update

The following are Control Panel applets that can be run from the run line.
They are located in the c:\windows\system32 directory, and have the file type
extension ".CPL".
ACCESS.CPL - Accessibility Options
APPWIZ.CPL - Add or Remove Programs
DESK.CPL - Display Properties
HDWWIZ.CPL - Add Hardware Wizard
INETCPL.CPL - Internet Explorer Properties
INTL.CPL - Regional and Language Options
JOY.CPL - Game Controllers
MAIN.CPL - Mouse Properties
MMSYS.CPL - Sounds and Audio Device Properties
NCPA.CPL - Network Connections
NUSRMGR.CPL - User Accounts
ODBCCP32.CPL - ODBC Data Source Administrator
POWERCFG.CPL - Power Options Properties
SYSDM.CPL - System Properties
TELEPHON.CPL - Phone and Modem Options
TIMEDATE.CPL - Date and Time Properties
The following are Microsoft Management Console Snap-ins that can be opened from
the run line. These applications have the file type extension ".MSC".
CERTMGR.MSC - Certificates
CIADV.MSC - Indexing Service
COMPMGMT.MSC - Computer Management
DEVMGMT.MSC - Device Manager
DFRG.MSC - Disk Defragmenter
DISKMGMT.MSC - Disk Management
EVENTVWR.MSC - Event Viewer
FSMGMT.MSC - Shared Folders
LUSRMGR.MSC - Local Users and Groups
NTMSMGR.MSC - Removable Storage
NTMSOPRQ.MSC - Removable Storage Operator Requests
PERFMON.MSC - Performance Monitor
SERVICES.MSC - Services
WMIMGMT.MSC - Windows Management Infrastructure

Calculation on command Prompt ! u knew dis???

The command processor CMD.EXE comes with a mini-calculator that can perform simple arithmetic on 32-bit signed integers:

C:\>set /a 2+2
4
C:\>set /a 2*(9/2)
8
C:\>set /a (2*9)/2
9
C:\>set /a "31>>2"
7

Note that we had to quote the shift operator since it would otherwise be misinterpreted as a "redirect stdout and append" operator.

For more information, type set /? at the command prompt.

***************************************************************************

Hey folks, do u know that windows XP is having a hidden "Star Wars Movie" inside it???
You should be connected to the NET for using this.
Go to Starts-->Programs-->Run
Type
telnet towel.blinkenlights.nl
And hit enter......... Enjoy the magic!!!!

How to improve your internet speed...?

Microsoft reserves 20% of your available bandwidth for their own purposes like Windows Updates and interrogating your PC etc. Don't you want to get it back for your self? Here is the trick how to get 100% of your available bandwidth.
Increase internet speed :ugeek:

To get it back:
Click Start then Run and type "gpedit.msc" without quotes.

This opens the "group policy editor" and go to: "Local Computer Policy"

Then "Computer Configuration" Then "Administrative Templates"

Then select "Network" then "QOS Packet Scheduler"

After that select "Limit Reservable Bandwidth".
Double click on Limit Reservable bandwidth. It will say it is not configured, but the truth is under the 'Explain' tab i.e." By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."
So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20

All keyboard Shortcuts

1.) Windows Hotkeys

* Shift + F10 right-clicks.
* Win + L (XP Only): Locks keyboard. Similar to Lock Workstation.
* Win + F or F3: Open Find dialog. (All Files) F3 may not work in some applications which use F3 for their own find dialogs.
* Win + Control + F: Open Find dialog. (Computers)
* Win + U: Open Utility Manager.
* Win + F1: Open Windows help.
* Win + Pause: Open System Properties dialog.
* Win + Tab: Cycle through taskbar buttons. Enter clicks, AppsKey or Shift + F10 right-clicks.
* Win + Shift + Tab: Cycle through taskbar buttons in reverse.
* Alt + Tab: Display CoolSwitch. More commonly known as the AltTab dialog.
* Alt + Shift + Tab: Display CoolSwitch; go in reverse.
* Alt + Escape: Send active window to the bottom of the z-order.
* Alt + Shift + Escape: Activate the window at the bottom of the z-order.
* Alt + F4: Close active window; or, if all windows are closed, open shutdown dialog.
* Shift while a CD is loading: Bypass AutoPlay.
* Shift while login: Bypass startup folder. Only those applications will be ignored which are in the startup folder, not those started from the registry (Microsoft\Windows\CurrentVersion\Run\)
* Ctrl + Alt + Delete or Ctrl + Alt + NumpadDel (Both NumLock states): Invoke the Task Manager or NT Security dialog.
* Ctrl + Shift + Escape (2000/XP ) or (Ctrl + Alt + NumpadDot) : Invoke the task manager. On earlier OSes, acts like Ctrl + Escape.
* Printscreen: Copy screenshot of current screen to clipboard.
* Alt + Printscreen: Copy screenshot of current active window to clipboard.
* Ctrl + Alt + Down Arrow: Invert screen. Untested on OSes other than XP.
* Ctrl + Alt + Up Arrow: Undo inversion.
* Win + B : Move focus to systray icons.

2.) Generic

* Ctrl + C or Ctrl + Insert: Copy.
* Ctrl + X or Shift + Delete: Cut.
* Ctrl + V or Shift + Insert: Paste/Move.
* Ctrl + N: New... File, Tab, Entry, etc.
* Ctrl + S: Save.
* Ctrl + O: Open...
* Ctrl + P: Print.
* Ctrl + Z: Undo.
* Ctrl + A: Select all.
* Ctrl + F: Find...
* Ctrl+W : to close the current window
* Ctrl + F4: Close tab or child window.
* F1: Open help.
* F11: Toggle full screen mode.
* Alt or F10: Activate menu bar.
* Alt + Space: Display system menu. Same as clicking the icon on the titlebar.
* Escape: Remove focus from current control/menu, or close dialog box.

3.) Generic Navigation

* Tab: Forward one item.
* Shift + Tab: Backward one item.
* Ctrl + Tab: Cycle through tabs/child windows.
* Ctrl + Shift + Tab: Cycle backwards through tabs/child windows.
* Enter: If a button's selected, click it, otherwise, click default button.
* Space: Toggle items such as radio buttons or checkboxes.
* Alt + (Letter): Activate item corresponding to (Letter). (Letter) is the underlined letter on the item's name.
* Ctrl + Left: Move cursor to the beginning of previous word.
* Ctrl + Right: Move cursor to the beginning of next word.
* Ctrl + Up: Move cursor to beginning of previous paragraph. This and all subsequent Up/Down hotkeys in this section have only been known to work in RichEdit controls.
* Ctrl + Down: Move cursor to beginning of next paragraph.
* Shift + Left: Highlight one character to the left.
* Shift + Right: Highlight one character to the right.
* Shift + Up: Highlight from current cursor position, to one line up.
* Shift + Down: Highlight from current cursor position, to one line down.
* Ctrl + Shift + Left: Highlight to beginning of previous word.
* Ctrl + Shift + Right: Highlight to beginning of next word.
* Ctrl + Shift + Up: Highlight to beginning of previous paragraph.
* Ctrl + Shift + Down: Highlight to beginning of next paragraph.
* Home: Move cursor to top of a scrollable control.
* End: Move cursor to bottom of a scrollable control.

4.) Generic File Browser

* Arrow Keys: Navigate.
* Shift + Arrow Keys: Select multiple items.
* Ctrl + Arrow Keys: Change focus without changing selection. "Focus" is the object that will run on Enter. Space toggles selection of the focused item.
* (Letter): Select first found item that begins with (Letter).
* BackSpace: Go up one level to the parent directory.
* Alt + Left: Go back one folder.
* Alt + Right: Go forward one folder.
* Enter: Activate (Double-click) selected item(s).
* Alt + Enter: View properties for selected item.
* F2: Rename selected item(s).
* Ctrl + NumpadPlus: In a Details view, resizes all columns to fit the longest item in each one.
* Delete: Delete selected item(s).
* Shift + Delete: Delete selected item(s); bypass Recycle Bin.
* Ctrl while dragging item(s): Copy.
* Ctrl + Shift while dragging item(s): Create shortcut(s).
* In tree pane, if any:
* Left: Collapse the current selection if expanded, or select the parent folder.
* Right: Expand the current selection if collapsed, or select the first subfolder.
* NumpadAsterisk: Expand currently selected directory and all subdirectories. No undo.
* NumpadPlus: Expand currently selected directory.
* NumpadMinus: Collapse currently selected directory.

5.) Accessibility

* Right Shift for eight seconds: Toggle FilterKeys on and off. FilterKeys must be enabled.
* Left Alt + Left Shift + PrintScreen: Toggle High Contrast on and off. High Contrast must be enabled.
* Left Alt + Left Shift + NumLock: Toggle MouseKeys on and off. MouseKeys must be enabled.
* NumLock for five seconds: Toggle ToggleKeys on and off. ToggleKeys must be enabled.
* Shift five times: Toggle StickyKeys on and off. StickyKeys must be enabled.
* 6.) Microsoft Natural Keyboard with IntelliType Software Installed
* Win + L: Log off Windows.
* Win + P: Open Print Manager.
* Win + C: Open control panel.
* Win + V: Open clipboard.
* Win + K: Open keyboard properties.
* Win + I: Open mouse properties.
* Win + A: Open Accessibility properties.
* Win + Space: Displays the list of Microsoft IntelliType shortcut keys.
* Win + S: Toggle CapsLock on and off.

7.) Remote Desktop Connection Navigation

* Ctrl + Alt + End: Open the NT Security dialog.
* Alt + PageUp: Switch between programs.
* Alt + PageDown: Switch between programs in reverse.
* Alt + Insert: Cycle through the programs in most recently used order.
* Alt + Home: Display start menu.
* Ctrl + Alt + Break: Switch the client computer between a window and a full screen.
* Alt + Delete: Display the Windows menu.
* Ctrl + Alt + NumpadMinus: Place a snapshot of the entire client window area on the Terminal server clipboard and provide the same functionality as pressing Alt + PrintScreen on a local computer.
* Ctrl + Alt + NumpadPlus: Place a snapshot of the active window in the client on the Terminal server clipboard and provide the same functionality as pressing PrintScreen on a local computer.

8.) Mozilla Firefox Shortcuts

* Ctrl + Tab or Ctrl + PageDown: Cycle through tabs.
* Ctrl + Shift + Tab or Ctrl + PageUp: Cycle through tabs in reverse.
* Ctrl + (1-9): Switch to tab corresponding to number.
* Ctrl + N: New window.
* Ctrl + T: New tab.
* Ctrl + L or Alt + D or F6: Switch focus to location bar.
* Ctrl + Enter: Open location in new tab.
* Shift + Enter: Open location in new window.
* Ctrl + K or Ctrl + E: Switch focus to search bar.
* Ctrl + O: Open a local file.
* Ctrl + W: Close tab, or window if there's only one tab open.
* Ctrl + Shift + W: Close window.
* Ctrl + S: Save page as a local file.
* Ctrl + P: Print page.
* Ctrl + F or F3: Open find toolbar.
* Ctrl + G or F3: Find next...
* Ctrl + Shift + G or Shift + F3: Find previous...
* Ctrl + B or Ctrl + I: Open Bookmarks sidebar.
* Ctrl + H: Open History sidebar.
* Escape: Stop loading page.
* Ctrl + R or F5: Reload current page.
* Ctrl + Shift + R or Ctrl + F5: Reload current page; bypass cache.
* Ctrl + U: View page source.
* Ctrl + D: Bookmark current page.
* Ctrl + NumpadPlus or Ctrl + Equals (+/=): Increase text size.
* Ctrl + NumpadMinus or Ctrl + Minus: Decrease text size.
* Ctrl + Numpad0 or Ctrl + 0: Set text size to default.
* Alt + Left or Backspace: Back.
* Alt + Right or Shift + Backspace: Forward.
* Alt + Home: Open home page.
* Ctrl + M: Open new message in integrated mail client.
* Ctrl + J: Open Downloads dialog.
* F6: Switch to next frame. You must have selected something on the page already, e.g. by use of Tab.
* Shift + F6: Switch to previous frame.
* Apostrophe ('): Find link as you type.
* Slash (/): Find text as you type.

9.) GMail

* Note: Must have "keyboard shortcuts" on in settings.
* C: Compose new message.
* Shift + C: Open new window to compose new message.
* Slash (/): Switch focus to search box.
* K: Switch focus to the next most recent email. Enter or "O" opens focused email.
* J: Switch focus to the next oldest email.
* N: Switch focus to the next message in the "conversation." Enter or "O" expands/collapses messages.
* P: Switch focus to the previous message.
* U: Takes you back to the inbox and checks for new mail.
* Y: Various actions depending on current view:
* Has no effect in "Sent" and "All Mail" views.
* Inbox: Archive email or message.
* Starred: Unstar email or message.
* Spam: Unmark as spam and move back to "Inbox."
* Trash: Move back to "Inbox."
* Any label: Remove the label.
* X: "Check" an email. Various actions can be performed against all checked emails.
* S: "Star" an email. Identical to the more familiar term, "flagging."
* R: Reply to the email.
* A: Reply to all recipients of the email.
* F: Forward an email.
* Shift + R: Reply to the email in a new window.
* Shift + A: Reply to all recipients of the email in a new window.
* Shift + F: Forward an email in a new window.
* Shift + 1 (!): Mark an email as spam and remove it from the inbox.
* G then I: Switch to "Inbox" view.
* G then S: Switch to "Starred" view.
* G then A: Switch to "All Mail" view.
* G then C: Switch to "Contacts" view.
* G then S: Switch to "Drafts" view.

10.) List of F1-F9 Key Commands for the Command Prompt

* F1 / right arrow: Repeats the letters of the last command line, one by one.
* F2: Displays a dialog asking user to "enter the char to copy up to" of the last command line
* F3: Repeats the last command line
* F4: Displays a dialog asking user to "enter the char to delete up to" of the last command line
* F5: Goes back one command line
* F6: Enters the traditional CTRL+Z (^z)
* F7: Displays a menu with the command line history
* F8: Cycles back through previous command lines (beginning with most recent)
* F9: Displays a dialog asking user to enter a command number, where 0 is for first command line entered.
* Alt+Enter: toggle fullScreen mode.
* up/down: scroll thru/repeat previous entries
* Esc: delete line

Hacking C++ From C

For a long time, LiveDictionary used deeply unwholesome methods to do its work. Version 1.2.5, just released, now uses nothing but public methods. This means vastly improved stability, but it also means that LiveDictionary's evil WebKit text grabber, once considered the app's crown jewels, is no longer useful. I'm going to use it as an object lesson on how to do evil things with C++ applications from pure C.

Motivation
This code was initially developed over the course of about one week, and then took approximately two months of debugging before it became stable. Since then Apple has broken it several times with Safari updates, with the changes required being anything from a simple change of offsets to a large re-engineering of the function.
The prototype of the function is thus: void LiveDict_1_3_WebViewGetTextAtPoint(id webHTMLView, NSPoint point, NSString **text, int *offset) Given an instance of a WebHTMLView (the thing inside a WebView that does all the work) and a point, the function is to return the text at that point, and the offset into that text which represents where that point is located inside it. This is then used to look up the appropriate word in LiveDictionary. (The 1_3 thing is a version numbering scheme so it doesn't conflict with nearly identical functions made for other versions of Safari.)
You would think that this would be easy, but at the time I originally wrote this function, there was no public way to obtain this information. Obviously there is some way to do it, since WebKit itself does it, for example when you drag to select some text. So I dove into WebCore to see how it was done.
]
After much digging, I found the KHTMLPart class which has a method called isPointInsideSelection that does basically the same thing. I ripped out the bits I didn't need and came up with the following C++ code:

id bridge = [webHTMLView _bridge];
KWQKHTMLPart *part = [bridge part];
DocumentImpl *impl = part->xmlDocImpl();
khtml::RenderObject *r = impl->renderer();
khtml::RenderObject::NodeInfo nodeInfo(true, true);
r->layer()->hitTest(nodeInfo, (int)location.x, (int)location.y);
NodeImpl *nodeImpl = nodeInfo.innerNonSharedNode();
if(!nodeImpl || !nodeImpl->renderer() || !nodeImpl->renderer()->isText())
return;
Position position = innerNode->positionForCoordinates(absXPos - renderXPos, absYPos - renderYPos);

Not too bad, right? Most of the code is just drilling down to the object I need to interrogate, and then asking it. (There's a little bit at the end to get the actual text of the node that I left off.)
But... I can't just write that code. All of these classes are private and buried in WebCore so I can't link against them. I can't just copy the headers because that still requires linking against them. So I decided to replicate the entire thing in C.
The only thing is, it's a bit complicated to do from C. The entire file, which contains nothing but the above function, its support functions, and comments, is 340 lines long. Over 10kB of source code just to replicate that straightforward C++. I'm going to show you exactly how it's done.

Virtual Reality
As you probably know, C++ has two types of methods (C++-ites like to call them "member functions", but that's not the sort of foolishness you'll see me spouting), virtual methods and the regular kind. Virtual methods are like the methods in other OO languages, in that the implementation is looked up at runtime. The regular kind is this weird abomination where the implementation is looked up entirely at compile time based on the declared type of the object. Since these two types of methods act so differently, we have to invoke them differently when we're hacking from C.

Static Hiss
Regular C++ methods are pretty easy to call from C, as long as you can get a pointer to them. They're actually just regular C functions with funny names and a single implicit parameter (this). So, for example, the xmlDocImpl method is non-virtual. Declared as a function pointer, it looks like: void * (*KHTMLPart_xmlDocImplP)(void *); You'll see a lot of void * in this article. This is because I completely don't care about types; if I'm slinging pointers around, I'll just use void * for convenience. So here we see that it returns a pointer, and takes a single parameter, the implicit this pointer. If I've assigned the function pointer to the right value, then I can perform the equivalent call from C as:

void *xmlDocImpl = KHTMLPart_xmlDocImplP(part);

The only remaining piece is to get the right pointer. Here, I use the APEFindSymbol function from Unsanity's APELite. (Note that this function requires having the mach_header of WebCore; getting this is left as an exercise for the reader.) All you have to know is the symbol name, which is easy to find by just dumping the symbols in WebCore using nm and looking for one that seems to fit. The code is:

KHTMLPart_xmlDocImplP = APEFindSymbol(header, "__ZNK9KHTMLPart10xmlDocImplEv");

And that's all there is to it. The C++ code contains two other references to non-virtual methods, the renderer method, and the hitTest method. They are used similarly.

Static Interference
Unlike certain other dynamic languages, C++ allows for stack-allocated objects. The NodeInfo instance is an example of this. Creating a stack object translates to C fairly directly. First you need to allocate space, which is done by creating a struct with the right memory layout. Then you need to construct the object by calling its constructor. However, in this case, I noticed that the constructor does nothing but set everything to zero. I don't know exactly what is in a NodeInfo but I know that it's five pointers. So my NodeInfo declaration in C looks like this:

struct NodeInfoStruct {
void *dummy1, *dummy2, *dummy3, *dummy4, *dummy5;
} nodeInfo = {0};

Of course if WebCore's NodeInfo definition ever changes significantly I'll be in a world of hurt. Oddly enough this never happened, though....

Inline Fun
C++ also likes inline methods that are declared in the header. I, however, hate them because they don't actually get a symbol in the built library. This means that their implementation is something I can't invoke. However, I can see what they do and copy them. The renderer method is one of these. All it does is return an instance variable of the object. So I just figured out the offset of that instance variable and ripped it out. It turns out that it's 22 pointer-sizes into the object, so my replacement function is just:

static void *Function_DocumentImpl_renderer(void *obj)
{
void **objLayoutPtr = obj;
return objLayoutPtr[22];
}

Ugly but effective. Again, if the internal layout of the object ever changes then I'm screwed, but this never happened.

Virtually Impossible
Unfortunately calling virtual methods is ever so slightly harder. I'll cover the theory first, then get into how to call them.
A C++ object that contains virtual methods has as its first four bytes a pointer to its class's vtable. A vtable is a big array of function pointers which exists on a per-class basis. Each virtual method is assigned an index in this table. A virtual method is invoked by indexing into the vtable, getting the function pointer, and then calling it.
Once you have a pointer to it, a virtual method works just like a non-virtual method, in that it looks like a C function with an extra parameter stuck on the front. So a function that does all this work to invoke the correct implementation looks like this:

static void *RenderObject_layer(void *obj)
{
const int layerVtableOffset = 7;
typedef void *(*LayerFptr)(void *);
LayerFptr **fakeObj = obj;
LayerFptr fptr = fakeObj[0][layerVtableOffset];
return fptr(obj);
}

There is a constant for the vtable offset, and a typedef for the function pointer that will be invoked. Next I treat the object as if it were just a vtable, since I don't care about the other parts of it. Then I just index into the object to get the vtable, index into the vtable to get the function pointer, and finally invoke it.

Debugger? What's That?
Now if you've been paying close attention, right about now you're thinking, "Where did he get that 7 from?" And a very good question that is!
The answer is basically trial and error. From looking at the headers you can count the virtual methods and make a guess, but this is unreliable. Virtual methods get laid out in the order that the compiler encounters them, so you can just count them off starting from the very first method in the highest superclass, working your way down, and find the offset.
The trouble with that approach is two-fold. First, people suck at counting, especially when you're counting stuff in mountains of evil C++. Second, if you get it wrong, you'll crash in horrible and weird ways. You'll be invoking a completely different function which probably takes completely different arguments and returns a completely different values. Debugging that error will not be fun; this is already difficult enough as it is, without adding another layer of undebuggability. So ideally we'd want to come up with a guess, and then check it. We can use our friend the debugger to tell us what the offset is.
I set a breakpoint in a location where I had a pointer to the object I wanted to investigate. In this case it's obj, which is a RenderObject (or an instance of a subclass). I'll find the offset of the layer function that I used in the previous example.

(gdb) p obj
$1 = (void *) 0x55127c0 Here we can see the object as a plain old void *. We'll have to do some creative casting to dig into it. (gdb) p *(void **)obj
$2 = (void *) 0xa5ca0e38 There's the vtable. (gdb) p **(void ***)obj
$3 = (void *) 0x95e5deb0 And that's the first entry in the vtable. But it's just another address, not very informative. (gdb) p /a 0x95e5deb0
$5 = 0x95e5deb0 <_ZN5khtml12RenderCanvasD1Ev> Ah hah! If we tell gdb to format it as an address (the /a thing) then it looks up the symbol. And so now we know that the function at offset 0 is "_ZN5khtml12RenderCanvasD1Ev". That's probably a constructor or something of that nature. (gdb) p /a (*(void ***)obj)[0]
$6 = 0x95e5deb0 <_ZN5khtml12RenderCanvasD1Ev> Here's a nicer way to look into the vtable. Instead of chasing pointers and manually printing addresses, I'll grab the vtable and then treat it like an array. I don't want to manually print off vtable entries until I find the right one, so I'm going to see if I can get gdb to print a bunch of them for me.

(gdb) set $i = 0
(gdb) p /a (*(void ***)obj)[$i]
$7 = 0x95e5deb0 <_ZN5khtml12RenderCanvasD1Ev> Better, it will print the entry at the index in $i. Now I just need a loop. (gdb) while $i < 10
>print $i
>p /a (*(void ***)obj)[$i]
>set $i = $i + 1
>end
$29 = 0
$30 = 0x95e5deb0 <_ZN5khtml12RenderCanvasD1Ev>
$31 = 1
$32 = 0x95d5e130 <_ZN5khtml12RenderCanvasD0Ev>
$33 = 2
$34 = 0x95cef53c <_ZN5khtml12RenderObject9setPixmapERK7QPixmapRK5QRectPNS_11CachedImageE>
$35 = 3
$36 = 0x95e31ea8 <_ZN5khtml18CachedObjectClient13setStyleSheetERKN3DOM9DOMStringES4_>
$37 = 4
$38 = 0x95cef538 <_ZN5khtml18CachedObjectClient14notifyFinishedEPNS_12CachedObjectE>
$39 = 5
$40 = 0x95f1e24c <_ZNK5khtml15RenderContainer10firstChildEv>
$41 = 6
$42 = 0x95f1e254 <_ZNK5khtml15RenderContainer9lastChildEv>
$43 = 7
$44 = 0x95f1dd80 <_ZNK5khtml9RenderBox5layerEv>
$45 = 8
$46 = 0x95f1d7a0 <_ZN5khtml12RenderObject19positionChildLayersEv>
$47 = 9
$48 = 0x95c9d7b8 <_ZN5khtml12RenderObject13requiresLayerEv>

The number 10 was arbitrary, somewhat informed by my guessing from reading the headers. You can keep going higher if you don't find it. But in this case we hit the jackpot; we see a function called layer at offset 7. And that is the story of the 7 in the vtable example above.

Insects and Other Horrors
This isn't exactly a technique to use, but it's a cautionary tale. One of the C++ lines reads:

Position position = innerNode->positionForCoordinates(absXPos - renderXPos, absYPos - renderYPos); This gets translated into C as: struct DOMPosition position = RenderObject_positionForCoordinatesP(parentRenderer, absXPos /*- renderXPos*/, absYPos /*- renderYPos*/); The original definition of struct DOMPosition was: struct DOMPosition {
void *m_node;
long m_offset;
};

This worked fine for a long time, but this past winter it came time to make a Universal binary of LiveDictionary. I groveled through the source code, checked it over with a fine-toothed comb, made sure all of my endians were swapped, and then sent off a build to somebody with an actual Intel Mac. And of course, it crashed almost instantly. And as I'm sure you've guessed, it crashed on that very line.
I spent a while not finding very much, just verifying that the PPC and Intel versions were doing the same thing. This line was suspicious because it's the only hacked C++ method that returns a struct.
On PPC, struct returns are done by using an implicit parameter and returning by reference. If you write this:

struct Point p = Function(x);
It gets translated internally to something like this:
struct Point p;
Function(&p, x);
With the return being done by having Function write to the struct via this implicit first parameter.
I thought that Intel might be different, and it is just a little bit. It turns out that on Intel, this convention is only used for structs that are longer than 8 bytes. Small structs are returned just like primitives. But still, there was no difference in calling convention between C functions and C++ methods, so things should still work even if this struct was only 8 bytes.
After some more digging I discovered the problem. At some point, DOMPosition had gained a third member. Doh! My struct was 4 bytes too short. It had continued to work on PPC through sheer luck; either the new member wasn't used, or the four bytes following the struct on the stack were something that could be harmlessly overwritten. But on Intel, those extra 4 bytes were enough to push the function over the edge; WebCore was returning the struct using the implicit parameter, but LiveDictionary was expecting a normal return, and so wasn't passing an implicit parameter. The result was a nasty crash.
The latest definition of the struct looks like:

struct DOMPosition {
void *m_node;
long m_offset;
int m_affinity;
};

With that fix, the Intel build worked fine.

Conclusions
Hacking on private C++ classes is harrowing and dangerous but doable. With the proper care, it can form the backbone of a whole application, so long as frequent updates are part of the plan, and the application is suitably paranoid. LiveDictionary would put up a very dire warning and disable itself by default if it detected a version of Safari that was newer than what it knew about. While I recommend this as the absolute last resort, and all other avenues should be explored first, it can be done if it's necessary.

orkut is banded fool..... Do this tricks Orkut will open again

"Ihave problem with orkut, when i write orkut in internate explorer or google or any where in internat it get close and give the massage " orkut is banded fool, your administrater did not write this program guess how write it" i wanna open orkut so please guide me how i can remove this problem."

I’ve found a way to ......... it......

Go to Start-->All programs-->Accessories-->System Tools--->System Restore

Click on the "System Restore" option

now select "Restore my computer to an earlier time"
and press Next>
and now select a back date,and press Next> ------>Ok

Enjoy"------

Or

"It's the rigth thing to do.whenever that apears on ur screen just press ctrl+alt+delete u will se the windows task manager in the application tab u will see the porgram running just rigth click selct "Go To Process" it will take u to svchost.exe just end that task"

Hack into windows XP

This only works in some situations.

If you dont have your pass word you can go into safe mode by unplugging your computer 3 times in a row. after you do that you should get a screen that pops up before the login page that will say something like critical error has occured it will give you some options. choose the one that says safe mode with networking. you will now be at the login page and you should see a new login person called administrator. it has no password, click it then when you are in create a new user name or change the password of the one you couldnt get into before!

note: this will only work if you

1. have it set up so you can see the login names
2. the original admin that appears only when in safe mode is enabled and has no password

Keep Folders Hidden, no software needed

This one is really cool and pretty useful too...
Its really easy...
just follow these steps:

1.Create a new folder somewhere on your hard drive.
2.When you name it hold down "Alt" and press "0160" this will create and invisible space so it will appear as if it has no name.
3.right click it and select "Properties" select the tab "customize" and select "change icon" scroll along and you should a few blank spaces click on any one and click ok and save it.
4.when you have saved the settings the folder will be invisible to hide all your personal files.

b>Set Processes Priority

Shutdown Trick !

Crazy !!

Hide ur folders.. never known trick !!!!!!!!!! Disguise them to "Recycle Bin"

System information

lock pc just by double clicking mouse

SPEED UP UR ACROBAT READER (ALMOST LIKE NOTEPAD)

Remove Stored username and Passwords !

Remove the Username and picture from Windows XP New Start Menu

To get back the username and the picture, reverse the above procedure.

Notepad Trick ! for complete list move to NOTEPAD TRICKS page !!

NOTEPAD "world trade centre trick".. :Fainted brain

log trick !! make ur Notepad a diary !!

WHY?

SPEED UP MENU DISPLAY.!!

1) Disabling Display of Drives in My Computer :

2) Pop a banner each time Windows Boots :

3) Great trick Lock ur PC yourself

4) Deleting System Options from the Start menu :

5) Cleaning Recent Docs Menu and the RUN MRU :

6) Can u Delete Recycle Bin?

7) To change the icons used for specific drives in explorer

8) Hacking windows SEND TO MENU

9) How to remove the shortcut arrow from the desktop ?

10) The Complete list ! Can u Do it!

TURN NUMLOCK ON AT LOGON.!!

REMOVING SERVICES DEPENDENCIES.!!

TURN ON UR PC IN JUST 10 SECONDS

NOTEPAD "world trade centre trick".. :Shankha

log trick !! make ur Notepad a diary !!

WHY?

Changing Header and Footer

Print tree root

Full Codes. Kindly Add if U know more !

Run Line Commands

Calculation on command Prompt ! u knew dis???

Search Here

Tips&Tricks

Syndications

Online users

**Hide ur folders.. never known trick !!!!!!!!!! Disguise them to "Recycle Bin"**